i.MX Processors中的主题 Re: GPIO Debounce https://community.nxp.com/t5/i-MX-Processors/GPIO-Debounce/m-p/404939#M60210 <HTML><HEAD></HEAD><BODY><P>HI Vinothkumar</P><P></P><P>debounce time is not configurable, in general one can set</P><P></P><P>HYS Hysteresis Enable Field</P><P>PUE Keeper Enabled</P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 29 May 2015 02:28:38 GMT igorpadykov 2015-05-29T02:28:38Z GPIO Debounce https://community.nxp.com/t5/i-MX-Processors/GPIO-Debounce/m-p/404938#M60209 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>How to enable the GPIO Debounce and set the DebouceTime in IMX6?</P><P></P><P>Regards</P><P>Vinoth</P></BODY></HTML> Thu, 28 May 2015 11:03:39 GMT https://community.nxp.com/t5/i-MX-Processors/GPIO-Debounce/m-p/404938#M60209 vinothkumarraje 2015-05-28T11:03:39Z Re: GPIO Debounce https://community.nxp.com/t5/i-MX-Processors/GPIO-Debounce/m-p/404939#M60210 <HTML><HEAD></HEAD><BODY><P>HI Vinothkumar</P><P></P><P>debounce time is not configurable, in general one can set</P><P></P><P>HYS Hysteresis Enable Field</P><P>PUE Keeper Enabled</P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 29 May 2015 02:28:38 GMT https://community.nxp.com/t5/i-MX-Processors/GPIO-Debounce/m-p/404939#M60210 igorpadykov 2015-05-29T02:28:38Z