i.MX Processors中的主题 mx51evk+u-boot+Error 139

mx51evk+u-boot+Error 139

Mt_ — Tue, 27 Sep 2011 14:08:48 GMT

u-boot-2011.09-rc2.tar.bz2

make mx51evk

make

...

/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld: u-boot: warning: allocated section `.bss' not in segment
/bin/bash: line 1: 21220 Segmentation fault /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-non ... none-linux-gnueabi/4.1.2 -lgcc -Map u-boot.map -o u-boot
make: *** [u-boot] Error 139

How fix ?

Re: mx51evk+u-boot+Error 139

daiane_angolini — Tue, 27 Sep 2011 16:50:56 GMT

what´s tool chain version you are using?

Please, try with 4.4.0

Re: mx51evk+u-boot+Error 139

fabio_estevam — Wed, 28 Sep 2011 02:38:43 GMT

Since you are using a mainline U-boot I have two suggestions:

1. Use a more recent toolchain (GCC4.4, GCC4.5)

2. Build as:

make mx51evk_config

make u-boot.imx

Regards,

Fabio Estevam

Re: mx51evk+u-boot+Error 139

Mt_ — Wed, 28 Sep 2011 10:41:22 GMT

thanks. U-boot build is success, but not work. Power does not remain in turn on. And no data tramsmit to UART.

As you know, how difference boars mx51evk and mx51-3stack

Re: mx51evk+u-boot+Error 139

fabio_estevam — Wed, 28 Sep 2011 11:08:56 GMT

When you select "make mx51evk_config" , it means that U-boot code will generate code specific to MX51EVK hardware.

If you use MX51-3stack or other hardware you will need to add support for it.

There is mx51_3stack support in the U-boot release done by FSL.

Regards,

Fabio Estevam

Re: mx51evk+u-boot+Error 139

Mt_ — Wed, 28 Sep 2011 13:34:05 GMT

I have Freescale Evalution Kit and use mx51_bbg software. How i can make u-boot-2011.09-rc2 for this configuration ?

Re: mx51evk+u-boot+Error 139

fabio_estevam — Wed, 28 Sep 2011 15:11:30 GMT

make mx51evk_config

make u-boot.imx

Follow doc/README.imximage steps.

Make sure your MX51EVK has the boot jumper set correctly to boot from SD card and that the SD card in inserted in the slot at the bottom of the board.