topic Re: i.mx6 solox for dummies in i.MX Processors

i.mx6 solox for dummies

peralesserrano — Fri, 10 Apr 2015 12:32:18 GMT

Hi i am noob, and I want to start working with i.mx6sx. but do not understand how to create a program and load it into linux to run from the cortex m4. exists a guide for dummies? hehe

My intention is to s programming and debug always from linux or from eclipse IDE as exposes in this document:

http://cache.freescale.com/files/32bit/doc/app_note/AN4553.pdf?fasp=1&WT_TYPE=Application%20Notes&WT_VENDOR=FREESCALE&WT…

but I can not find a document same Solox

can you help

PD sorry for my bad English

Re: i.mx6 solox for dummies

igorpadykov — Fri, 10 Apr 2015 13:49:37 GMT

Hi perales

suggest to try attached examples and use link below

Integrating Processor Expert for i.MX and ARM GCC with Eclipse

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: i.mx6 solox for dummies

peralesserrano — Fri, 10 Apr 2015 23:51:03 GMT

Hi igorpadykov Thanks for reply

but this document explains how to program the A9 to bare metal, explains nothing M4 cortex.

I want to know how to make a program for M4 cortex and how to to load and run it from linux embedded.

you can create a .hex and run it from ssd?

Re: i.mx6 solox for dummies

igorpadykov — Sat, 11 Apr 2015 01:43:32 GMT

MX6SX m4 hello world uart2 is example for M4 cortex.

Re: i.mx6 solox for dummies

peralesserrano — Sat, 11 Apr 2015 20:09:28 GMT

Sorry igorpadykov

I'm sorry but I find that in Integrating Processor Expert for i.MX and ARM GCC with Eclipse

also:

i.mx6 soloX is unsupported :smileyconfused:, where is the hello world example in cortex m4, Thanks for helping me :smileyhappy:

Re: i.mx6 solox for dummies

Yuri — Tue, 21 Apr 2015 07:01:15 GMT

The recent release (1.0.1) of the Processor Expert does support i.MX6 SX.

Regards,

Yuri.

Re: i.mx6 solox for dummies

peralesserrano — Wed, 22 Apr 2015 15:47:56 GMT

It is good news,but still need to be sold MMPF0200F6 :smileywink:

Re: i.mx6 solox for dummies

yashavanthkumar — Tue, 13 Oct 2015 08:33:19 GMT

Hi,

I have used A9_launch_m4 example and able to run the code if I flash this code to SD card on imx6 solox SABRE development board.

But when I tried to flash this code to QSPI NOR flash memory using manufacturing tool, I did not see any output on UART.

Please refer the attached files that I am using with manufacturing tool.

Can you please tell me if I need to change the sources(.c or .h files) or the manufacturing tool files (ini or ucl2 files) to make this example to work with QSPI memory?

Re: i.mx6 solox for dummies

m4l490n — Tue, 01 Nov 2016 17:25:28 GMT

yashavanthkumarnaikvittal‌ have you solved this issue? Because I'm having a similar one. The difference is that I have an onboard eMMC but I haven't been able to make it work.

Thanks!

Re: i.mx6 solox for dummies

raghavendraks — Fri, 06 Oct 2017 09:54:53 GMT

Hi,

Any UART example code (imx6sx) for ARM C compiler not for arm gcc compiler.

If anyone have, please update to me,

Regards,

Raghavendra

Email:raaguks@gmail.com

Re: i.mx6 solox for dummies

chum — Sat, 12 Oct 2019 06:59:47 GMT

Hi raghavendra,

you find any UART code ?