topic Re: Help iMX53 platform booting from NAND flash in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/Help-iMX53-platform-booting-from-NAND-flash/m-p/394653#M57769 <HTML><HEAD></HEAD><BODY><P>Hi Peter</P><P></P><P>one can try rev. 1.6.2.048 MFG Tool where NAND is supported by ARD board</P><P></P><P>Programmers (Flash, etc.) (3)</P><P>IMX_MFG_TOOL (REV 1.6.2.048) </P><P><A href="http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RDIMX53SABRETAB&amp;fpsp=1&amp;tab=Design_Tools_Tab" title="http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RDIMX53SABRETAB&amp;fpsp=1&amp;tab=Design_Tools_Tab">SABRE Platform for Tablets Reference Design|Freescale</A> </P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Thu, 15 Oct 2015 01:42:39 GMT igorpadykov 2015-10-15T01:42:39Z Help iMX53 platform booting from NAND flash https://community.nxp.com/t5/i-MX-Processors/Help-iMX53-platform-booting-from-NAND-flash/m-p/394652#M57768 <HTML><HEAD></HEAD><BODY><P>We are using the WEC7 BSP from Adeneo and need help understanding what is involved in getting our bootloader and OS image on our NAND flash. The Adeneo bootloader does not have an option to write the images to NAND and I am struggling with understanding how to use MfgTool for this purpose. Any direction would be greatly appreciated.</P></BODY></HTML> Wed, 14 Oct 2015 14:12:48 GMT https://community.nxp.com/t5/i-MX-Processors/Help-iMX53-platform-booting-from-NAND-flash/m-p/394652#M57768 pkuph1 2015-10-14T14:12:48Z Re: Help iMX53 platform booting from NAND flash https://community.nxp.com/t5/i-MX-Processors/Help-iMX53-platform-booting-from-NAND-flash/m-p/394653#M57769 <HTML><HEAD></HEAD><BODY><P>Hi Peter</P><P></P><P>one can try rev. 1.6.2.048 MFG Tool where NAND is supported by ARD board</P><P></P><P>Programmers (Flash, etc.) (3)</P><P>IMX_MFG_TOOL (REV 1.6.2.048) </P><P><A href="http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RDIMX53SABRETAB&amp;fpsp=1&amp;tab=Design_Tools_Tab" title="http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RDIMX53SABRETAB&amp;fpsp=1&amp;tab=Design_Tools_Tab">SABRE Platform for Tablets Reference Design|Freescale</A> </P><P></P><P>Best regards</P><P>igor</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Thu, 15 Oct 2015 01:42:39 GMT https://community.nxp.com/t5/i-MX-Processors/Help-iMX53-platform-booting-from-NAND-flash/m-p/394653#M57769 igorpadykov 2015-10-15T01:42:39Z