i.MX Processors中的主题 Re: Dear I.MX6users,

Dear I.MX6users,

toshirokawaguch — Fri, 20 Feb 2015 11:05:54 GMT

Please tell me the way to wright to eMM and parallel-Nor-Flash of using the MFG-Tools

If you know please tell me the method,URL,Documents,or some other things which valid to my trouble.

igorpadykov — Mon, 23 Feb 2015 01:17:15 GMT

Hi Toshiro

parallel NOR is used in Sabre-AI boards and its usage is

described in documentation for this board on

for example i.MX_6Dual6Quad_Sabre-AI_Linux_User's_Guide.pdf

sect.9.5 Run the Image from Parallel NOR

sect.4.5 How to Boot from WEIM (Parallel) NOR

please use MFG Tool from Sabre-AI home page

Programmers (Flash, etc.)

In ucl2.xml one can find profiles for parallel NOR, such as

LIST name="MX6Q-Sabreauto-Parallel_NOR"

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

toshirokawaguch — Mon, 23 Feb 2015 12:44:43 GMT

Thanks a lot.

Now my Colleague is checking the documents.

Because I am not so good at　~

By the way My major　undergraduate in UNIV..is LOW...

Why I do this job..now..

This is also a course