Issue about GPIO on imx280

tony_l_cai — Fri, 13 Mar 2015 02:28:40 GMT

Hi, all

Do we have the imx280 bsp porting user guide？

could we have the tool like iomux.exe on imx280？

Re: Issue about GPIO on imx280

igorpadykov — Fri, 13 Mar 2015 06:11:08 GMT

Hi tony

there is no iomux tool for i.MX28, one can use

Table 8-2. Pin Definitions MCIMX28RM

also it may be useful for development to look at

Regarding porting guide, this depends on kernel version and may be used one

Linux 2.6.35 for i.MX53, MX53UG

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------