How to enable two csi camera at same time on i.mx6Q?

ct3paul — Fri, 10 Oct 2014 05:46:40 GMT

Hi all

I'm using i.mx6Q SD borad now.My BSP is linux-3.0.35.

I want to use two csi camera now(two ADV7180).My camera chip is ADV7180 and csi0 camera is working now.But csi2 camera cat't work.

This is what I've done：

step1：

the followed setting was needed in board-mx6q_sabresd.c:

static struct fsl_mxc_capture_platform_data capture_data[] = {
{
.csi = 0,
.ipu = 0,
.mclk_source = 0,
.is_mipi = 0,
}, {
.csi = 1,
.ipu = 0,
.mclk_source = 0,
.is_mipi = 1,
}, {
.csi = 1,
.ipu = 1,
.mclk_source = 0,
.is_mipi = 0,
},
};

static struct mipi_csi2_platform_data mipi_csi2_pdata = {
.ipu_id = 0,
.csi_id = 1,
.v_channel = 0,
.lanes = 2,
.dphy_clk = "mipi_pllref_clk",
.pixel_clk = "emi_clk",
};

static struct fsl_mxc_camera_platform_data mipi_csi2_data = {
.mclk = 24000000,
.mclk_source = 0,
.csi = 1,
.io_init = mx6q_mipi_sensor_io_init,
.pwdn = mx6q_mipi_powerdown,
};

static struct fsl_mxc_camera_platform_data camera_data = {
.mclk = 24000000,
.mclk_source = 0,
.csi = 0,
.io_init = mx6q_csi0_io_init,
.pwdn = mx6q_csi0_cam_powerdown,
};

static struct fsl_mxc_camera_platform_data camera2_data = {
.mclk = 24000000,
.mclk_source = 0,
.csi = 1,
.io_init = mx6q_csi1_io_init,
.pwdn = mx6q_csi1_cam_powerdown,
};

static struct i2c_board_info mxc_i2c0_board_info[] __initdata = {
{
I2C_BOARD_INFO("ov564x", 0x3c),
.platform_data = (void *)&camera_data,
},
};

static struct i2c_board_info mxc_i2c1_board_info[] __initdata = {
{
I2C_BOARD_INFO("ov5640_mipi", 0x3c),
.platform_data = (void *)&mipi_csi2_data,
},
};

static struct i2c_board_info mxc_i2c2_board_info[] __initdata = {
{
I2C_BOARD_INFO("ov564x", 0x3c),
.platform_data = (void *)&camera2_data,
},
};

In function mx6q_mipi_sensor_io_init():
if (cpu_is_mx6q())
mxc_iomux_set_gpr_register(1, 19, 1, 1);

In function mx6q_csi0_io_init():
if (cpu_is_mx6q())
mxc_iomux_set_gpr_register(1, 19, 1, 1);

In function mx6q_csi1_io_init():
if (cpu_is_mx6q())
mxc_iomux_set_gpr_register(1, 20, 1, 1);

In function mx6_sabresd_board_init():
imx6q_add_v4l2_capture(0, &capture_data[0]);
imx6q_add_v4l2_capture(1, &capture_data[1]);
imx6q_add_v4l2_capture(2, &capture_data[2]);
imx6q_add_mipi_csi2(&mipi_csi2_pdata);

step2：

enable both cameras at the same time by using the following patch:

Index: kernel/linux-3.0.35-4.0.0/drivers/media/video/mxc/capture/ipu_csi_enc.c

===================================================================

--- kernel.orig/linux-3.0.35-4.0.0/drivers/media/video/mxc/capture/ipu_csi_enc.c 2013-10-07 14:42:58.927083104 -0600

+++ kernel/linux-3.0.35-4.0.0/drivers/media/video/mxc/capture/ipu_csi_enc.c 2013-10-07 14:44:19.031082649 -0600

@@ -56,6 +56,24 @@

}

/*!

+ * Get CSI dma channel

+ * @param csi csi number

+ *

+ * @return DMA channel

+ */

+static ipu_channel_t csi_get_dma_channel(int csi)

+ switch(csi){

+ case 0:

+ return CSI_MEM0;

+ case 1:

+ return CSI_MEM1;

+ default:

+ return CSI_MEM0;

+ }

+/*!

* CSI ENC enable channel setup function

* @param cam struct cam_data * mxc capture instance

@@ -74,6 +92,8 @@

int csi_id;

#endif

+ uint32_t chan = csi_get_dma_channel(cam->csi);

CAMERA_TRACE("In csi_enc_setup\n");

if (!cam) {

printk(KERN_ERR "cam private is NULL\n");

@@ -162,13 +182,13 @@

}

#endif

- err = ipu_init_channel(cam->ipu, CSI_MEM, &params);

+ err = ipu_init_channel(cam->ipu, chan, &params);

if (err != 0) {

printk(KERN_ERR "ipu_init_channel %d\n", err);

return err;

}

- err = ipu_init_channel_buffer(cam->ipu, CSI_MEM, IPU_OUTPUT_BUFFER,

+ err = ipu_init_channel_buffer(cam->ipu, chan, IPU_OUTPUT_BUFFER,

pixel_fmt, cam->v2f.fmt.pix.width,

cam->v2f.fmt.pix.height,

cam->v2f.fmt.pix.bytesperline,

@@ -180,7 +200,7 @@

printk(KERN_ERR "CSI_MEM output buffer\n");

return err;

}

- err = ipu_enable_channel(cam->ipu, CSI_MEM);

+ err = ipu_enable_channel(cam->ipu, chan);

if (err < 0) {

printk(KERN_ERR "ipu_enable_channel CSI_MEM\n");

return err;

@@ -197,18 +217,20 @@

* @return status

-static int csi_enc_eba_update(struct ipu_soc *ipu, dma_addr_t eba, int *buffer_num)

+static int csi_enc_eba_update(unsigned int csi, struct ipu_soc *ipu, dma_addr_t eba, int *buffer_num)

{

int err = 0;

+ uint32_t chan = csi_get_dma_channel(csi);

pr_debug("eba %x\n", eba);

- err = ipu_update_channel_buffer(ipu, CSI_MEM, IPU_OUTPUT_BUFFER,

+ err = ipu_update_channel_buffer(ipu, chan, IPU_OUTPUT_BUFFER,

*buffer_num, eba);

if (err != 0) {

- ipu_clear_buffer_ready(ipu, CSI_MEM, IPU_OUTPUT_BUFFER,

+ ipu_clear_buffer_ready(ipu, chan, IPU_OUTPUT_BUFFER,

*buffer_num);

- err = ipu_update_channel_buffer(ipu, CSI_MEM, IPU_OUTPUT_BUFFER,

+ err = ipu_update_channel_buffer(ipu, chan, IPU_OUTPUT_BUFFER,

*buffer_num, eba);

if (err != 0) {

pr_err("ERROR: v4l2 capture: fail to update "

@@ -217,7 +239,7 @@

}

- ipu_select_buffer(ipu, CSI_MEM, IPU_OUTPUT_BUFFER, *buffer_num);

+ ipu_select_buffer(ipu, chan, IPU_OUTPUT_BUFFER, *buffer_num);

*buffer_num = (*buffer_num == 0) ? 1 : 0;

@@ -234,6 +256,7 @@

{

cam_data *cam = (cam_data *) private;

int err = 0;

+ uint32_t irq;

CAMERA_TRACE("IPU:In csi_enc_enabling_tasks\n");

cam->dummy_frame.vaddress = dma_alloc_coherent(0,

@@ -250,8 +273,10 @@

PAGE_ALIGN(cam->v2f.fmt.pix.sizeimage);

cam->dummy_frame.buffer.m.offset = cam->dummy_frame.paddress;

- ipu_clear_irq(cam->ipu, IPU_IRQ_CSI0_OUT_EOF);

- err = ipu_request_irq(cam->ipu, IPU_IRQ_CSI0_OUT_EOF,

+ irq = IPU_IRQ_CSI0_OUT_EOF + cam->csi;

+ ipu_clear_irq(cam->ipu, irq);

+ err = ipu_request_irq(cam->ipu, irq,

csi_enc_callback, 0, "Mxc Camera", cam);

if (err != 0) {

printk(KERN_ERR "Error registering rot irq\n");

@@ -283,9 +308,11 @@

int csi_id;

#endif

- err = ipu_disable_channel(cam->ipu, CSI_MEM, true);

+ uint32_t chan = csi_get_dma_channel(cam->csi);

+ err = ipu_disable_channel(cam->ipu, chan, true);

- ipu_uninit_channel(cam->ipu, CSI_MEM);

+ ipu_uninit_channel(cam->ipu, chan);

if (cam->dummy_frame.vaddress != 0) {

dma_free_coherent(0, cam->dummy_frame.buffer.length,

@@ -341,7 +368,8 @@

/* free csi eof irq firstly.

* when disable csi, wait for idmac eof.

* it requests eof irq again */

- ipu_free_irq(cam->ipu, IPU_IRQ_CSI0_OUT_EOF, cam);

+ ipu_free_irq(cam->ipu, IPU_IRQ_CSI0_OUT_EOF + cam->csi, cam);

return ipu_disable_csi(cam->ipu, cam->csi);

}

Index: kernel/linux-3.0.35-4.0.0/drivers/media/video/mxc/capture/mxc_v4l2_capture.c

===================================================================

--- kernel.orig/linux-3.0.35-4.0.0/drivers/media/video/mxc/capture/mxc_v4l2_capture.c 2013-10-07 14:42:58.939083104 -0600

+++ kernel/linux-3.0.35-4.0.0/drivers/media/video/mxc/capture/mxc_v4l2_capture.c 2013-10-07 14:43:15.471083010 -0600

@@ -429,7 +429,7 @@

list_del(cam->ready_q.next);

list_add_tail(&frame->queue, &cam->working_q);

frame->ipu_buf_num = cam->ping_pong_csi;

- err = cam->enc_update_eba(cam->ipu, frame->buffer.m.offset,

+ err = cam->enc_update_eba(cam-> csi, cam->ipu, frame->buffer.m.offset,

&cam->ping_pong_csi);

frame =

@@ -437,7 +437,7 @@

list_del(cam->ready_q.next);

list_add_tail(&frame->queue, &cam->working_q);

frame->ipu_buf_num = cam->ping_pong_csi;

- err |= cam->enc_update_eba(cam->ipu, frame->buffer.m.offset,

+ err |= cam->enc_update_eba(cam-> csi, cam->ipu, frame->buffer.m.offset,

&cam->ping_pong_csi);

spin_unlock_irqrestore(&cam->queue_int_lock, lock_flags);

} else {

@@ -2615,7 +2615,7 @@

struct mxc_v4l_frame,

queue);

if (cam->enc_update_eba)

- if (cam->enc_update_eba(cam->ipu, ready_frame->buffer.m.offset,

+ if (cam->enc_update_eba(cam->csi, cam->ipu, ready_frame->buffer.m.offset,

&cam->ping_pong_csi) == 0) {

list_del(cam->ready_q.next);

list_add_tail(&ready_frame->queue,

@@ -2625,7 +2625,7 @@

} else {

if (cam->enc_update_eba)

cam->enc_update_eba(

- cam->ipu, cam->dummy_frame.buffer.m.offset,

+ cam->csi, cam->ipu, cam->dummy_frame.buffer.m.offset,

&cam->ping_pong_csi);

}

Index: kernel/linux-3.0.35-4.0.0/drivers/media/video/mxc/capture/mxc_v4l2_capture.h

===================================================================

--- kernel.orig/linux-3.0.35-4.0.0/drivers/media/video/mxc/capture/mxc_v4l2_capture.h 2013-10-07 14:42:58.963083104 -0600

+++ kernel/linux-3.0.35-4.0.0/drivers/media/video/mxc/capture/mxc_v4l2_capture.h 2013-10-07 14:43:15.471083010 -0600

@@ -178,7 +178,7 @@

struct v4l2_rect crop_defrect;

struct v4l2_rect crop_current;

- int (*enc_update_eba) (struct ipu_soc *ipu, dma_addr_t eba, int *bufferNum);

+ int (*enc_update_eba) (unsigned int csi, struct ipu_soc *ipu, dma_addr_t eba, int *bufferNum);

int (*enc_enable) (void *private);

int (*enc_disable) (void *private);

int (*enc_enable_csi) (void *private);

please help me！

thanks

chen

Re: How to enable two csi camera at same time on i.mx6Q?

igorpadykov — Fri, 10 Oct 2014 12:00:05 GMT

Hi tao

please check below

IPU2 for CSI parallel camera

Best regards

igor

Re: How to enable two csi camera at same time on i.mx6Q?

ct3paul — Mon, 13 Oct 2014 00:41:48 GMT

Hi igor

Thank you for your reply

I also read this post bofore.But I don't konw how to do it ,can you help me solve it?

Thanks!

Chen

Re: Re: How to enable two csi camera at same time on i.mx6Q?

igorpadykov — Wed, 15 Oct 2014 13:46:18 GMT

Hi tao

also one can try attached patch.

Two cameras can work at unit test level:

/unit_tests/mxc_v4l2_capture.out -iw 1024 -ih 768 -ow 1024 -oh 768 -m 8 -fr 15 -d /dev/video0 -i 1 -c 100 /test1.yuv & /unit_tests/mxc_v4l2_capture.out -iw 1024 -ih 768 -ow 1024 -oh 768 -m 8 -fr 15 -d /dev/video1 -i 0 -c 100 /test2.yuv

~igor

Re: How to enable two csi camera at same time on i.mx6Q?

ct3paul — Tue, 28 Oct 2014 01:55:03 GMT

igor

My two csi camera also can't work when I do like you said.

My camera chip is ADV7180.It can work well when I loaded one chip driver.

But when I add two devices to i2c struct like this:

static struct i2c_board_info mxc_i2c0_board_info[] __initdata = {

#if 1

{

I2C_BOARD_INFO("adv7180", 0x20),

.platform_data = (void *)&adv7180_data,

#endif

#if 1

{

I2C_BOARD_INFO("adv7180", 0x21),

.platform_data = (void *)&camera2_data,

#endif

};

I can't load my driver.I enter a loop and I cat't break it when I loadind drivers if I add two devices to i2c struct.

My drivers:

insmod ipu_bg_overlay_sdc.ko

insmod ipu_csi_enc.ko

insmod ipu_fg_overlay_sdc.ko

insmod ipu_prp_enc.ko

insmod ipu_still.ko

insmod adv7180_tvin.ko

insmod mxc_v4l2_capture.ko

Thanks

Chen

i.MX ProcessorsのトピックRe: How to enable two csi camera at same time on i.mx6Q?

How to enable two csi camera at same time on i.mx6Q?

Re: How to enable two csi camera at same time on i.mx6Q?

Re: How to enable two csi camera at same time on i.mx6Q?

Re: Re: How to enable two csi camera at same time on i.mx6Q?

Re: How to enable two csi camera at same time on i.mx6Q?