Programming SPI via mfgtools

pt — Thu, 06 Nov 2014 05:29:35 GMT

I have used mfgtools to program spi. But I am getting the following error.

Log:

Panel A UtpUpdate Event: DeviceRemoval Msg: (null) DevState: Disconnected OpState: WAITING_FOR_DEVICE

Panel A UtpUpdate Event: VolumeArrival Msg: (null) DevState: Updater OpState: WAITING_FOR_DEVICE

1 - Panel A Finished <CMD/> type="find" body="Updater" file="" timeout="180" onError="" text="" SUCCESS code=0x0.

Panel A Start <CMD/> type="push" body="mknod class/mtd,mtd0,/dev/mtd0" file="" timeout="10" onError="" text="".

1 - Panel A Finished <CMD/> type="push" body="mknod class/mtd,mtd0,/dev/mtd0" file="" timeout="10" onError="" text="" FAIL code=0xffffffff.

Panel A: Operation is not completed.,failed to run command: type="push" body="mknod class/mtd,mtd0,/dev/mtd0" file="" timeout="10" onError="" text=""

2 - Panel A Finished processing SPI-NOR (uboot.sb) <LIST/> : FAIL code=-1.

Board:MCIMX28EVK

Linux2.6.35 kernel version

SPI flash:N25Q128

Regards

Original Attachment has been moved to: spi-log.txt.zip

Re: Programming SPI via mfgtools

alejandrolozan1 — Tue, 11 Nov 2014 22:32:19 GMT

Hi,

I checked one version of mfgtool and it seems that it does not support SPI NOR. I wonder if you checked the below discussion.

It contains the required steps to add the the SPI NOR support.

Best Regards,

Alejandro