https://community.nxp.com/t5/i-MX-Processors/how-to-use-mfg-tools/m-p/380784#M54916 <HTML><HEAD></HEAD><BODY><P>Hi chew</P><P></P><P>you can test if USB interface is healthy with SDK</P><P>(one can run tests with jtag)</P><P></P><P><A href="http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q&amp;nodeId=018rH3ZrDRB24A&amp;fpsp=1&amp;tab=Design_Tools_Tab">i.MX 6Series Platform SDK</A></P><P></P><P>or probably just replace processor.</P><P></P><P>Best regards</P><P>chip</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 26 Aug 2014 04:16:01 GMT igorpadykov 2014-08-26T04:16:01Z https://community.nxp.com/t5/i-MX-Processors/how-to-use-mfg-tools/m-p/380783#M54915 <HTML><HEAD></HEAD><BODY><P>in DOS, in Sb_loader folder, i run</P><P>sb_loader.exe -f u-boot-mx6q-sabrelite.bin</P><P>it reply waiting for HID device for 2 seconds</P><P></P><P>I brick my sabrelite board, try using mfg tools but without successful.</P><P>i tried following link <A href="http://comments.gmane.org/gmane.linux.linaro.devel/11942" title="http://comments.gmane.org/gmane.linux.linaro.devel/11942">http://comments.gmane.org/gmane.linux.linaro.devel/11942</A></P><P>Choose Options-&gt;Configuration...-&gt;USB-Ports </P><P>&nbsp; and search for something like "Linux-File-Stor..." or "HID-device..."</P><P></P><P>There is no something like "Linux-File-Stor..." or "HID-device..."</P></BODY></HTML> Tue, 26 Aug 2014 03:32:15 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-use-mfg-tools/m-p/380783#M54915 chewhouming 2014-08-26T03:32:15Z https://community.nxp.com/t5/i-MX-Processors/how-to-use-mfg-tools/m-p/380784#M54916 <HTML><HEAD></HEAD><BODY><P>Hi chew</P><P></P><P>you can test if USB interface is healthy with SDK</P><P>(one can run tests with jtag)</P><P></P><P><A href="http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q&amp;nodeId=018rH3ZrDRB24A&amp;fpsp=1&amp;tab=Design_Tools_Tab">i.MX 6Series Platform SDK</A></P><P></P><P>or probably just replace processor.</P><P></P><P>Best regards</P><P>chip</P><P>-----------------------------------------------------------------------------------------------------------------------</P><P>Note: If this post answers your question, please click the Correct Answer button. Thank you!</P><P>-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Tue, 26 Aug 2014 04:16:01 GMT https://community.nxp.com/t5/i-MX-Processors/how-to-use-mfg-tools/m-p/380784#M54916 igorpadykov 2014-08-26T04:16:01Z