topic Re: Re: MFG Tool Issue in i.MX Processors

MFG Tool Issue

tony_l_cai — Wed, 21 Jan 2015 23:46:14 GMT

Hi All,

when I used MFG Tool download the img to the board, The prompt stopped on the "Loading uboot",and didn't continue to the follow steps. What has happened?

And what I need to do can make all work? please help me in detail. 3Q!

Re: MFG Tool Issue

igorpadykov — Thu, 22 Jan 2015 01:09:36 GMT

Hi tony

for new board please run DDR test

https://community.freescale.com/docs/DOC-96412

and rebuild MFG Tools with new board ddr settings in Uboot file flash_header.S

check sect.3.9 Building Manufacturing Firmware attached document

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: Re: MFG Tool Issue

tony_l_cai — Thu, 22 Jan 2015 07:23:15 GMT

The following picture is the operation after DDR stress tool testing:

and could you tell me some possible reasons?

Re: Re: MFG Tool Issue

igorpadykov — Thu, 22 Jan 2015 07:55:10 GMT

Hi tony

for new problem/qustion new thread should be

created.

Thanks !

~igor