topic Best way to build Qt on Freescale i.MX2xx platforms with ltib in i.MX Processors

Best way to build Qt on Freescale i.MX2xx platforms with ltib

jppoulin — Sat, 28 Mar 2015 20:04:56 GMT

Hello gurus,

I am attempting to build a robust build of Qt on the Freescale i.MX embedded platform.

I am now attempting to build for the i.MX25 but after much reading and testing have been very frustrated in properly building Qt on the ltib-based development environment that exists for the MX25.

Q1: Is there a good recipe to build Qt on this embedded platform?

Q2: Which version of Qt should I build for this chip?

Thank you for any hint you can offer... grasping at straws!

Jean-Pierre

Re: Best way to build Qt on Freescale i.MX2xx platforms with ltib

Yuri — Mon, 06 Apr 2015 05:28:38 GMT

The following may be helpful :

https://community.freescale.com/docs/DOC-1481
https://community.freescale.com/message/263854#263854
https://community.freescale.com/message/383642#383642

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Best way to build Qt on Freescale i.MX2xx platforms with ltib

jppoulin — Mon, 06 Apr 2015 22:47:21 GMT

Thank you very much Yuri for taking the time.

In regards to the Yocto build, has anyone been able to build the Mx25 image over Yocto instead of ageing ltib?

Thank you again! :smileyhappy:

Re: Best way to build Qt on Freescale i.MX2xx platforms with ltib

Yuri — Tue, 21 Apr 2015 06:57:52 GMT

I have no such information :-(

Regards,

Yuri.