topic Re: Hi All, scripts and menuconfig in i.MX Processors

Hi All, scripts and menuconfig

dariuszzawisko — Wed, 04 Mar 2015 21:45:35 GMT

I am building Yocto on the custom board with imx28. I use the imx28evk machine as my base.
I have created the custom layer with kernel modifications and my custom images.
What should I do to setup all starting scripts for different runlevels or simply to add some new starting scripts or export environment variables?
Should I patch the initscripts package or maybe there is another way to do that?

Do we have in Yocto something similar to the configuration menu in LTIB (./ltib -c)?

If we talk about the configuration menu I know about bitbake -c menuconfig linux-imx and bitbake -c menuconfig busybox.

Do we have more similar menus in Yocto (for imx28)?

Best Regards

Darek

Re: Hi All, scripts and menuconfig

alejandrolozan1 — Mon, 09 Mar 2015 20:21:43 GMT

Hi,

Do you mean that bitbake -c menuconfig linux-imx does not work for the imx28?

I have tested it and it works at least for the linux kernel.

Best Regards,

Alejandro

Re: Hi All, scripts and menuconfig

dariuszzawisko — Wed, 11 Mar 2015 13:46:44 GMT

The command bitbake -c menuconfig linux-imx works very well and it allows change the kernel configuration.

I wondered if there are more configuration menus with gui.

Re: Hi All, scripts and menuconfig

alejandrolozan1 — Wed, 11 Mar 2015 15:32:11 GMT

Hi,

The menuconfig use will depend on the package. In this case busybox, linux kernel feature menuconfig.

But most of them lack of menuconfig.

/Alejandro