topic Re: WEC7, iMX6Q : SDBUS error in MultiBinFS implementation on SD in i.MX Processors

WEC7, iMX6Q : SDBUS error in MultiBinFS implementation on SD

KeshavaGN — Wed, 13 Aug 2014 13:02:38 GMT

Hi all,

I'm trying to implement MultiBinFS OS image on SDMMC.

I have flashed the SD with eboot.nb0 and NK.nb0 using cfimager.exe -raw

It is loading xip.nb0 successfully and loading sdbus.dll, sdmemory.dll and usdhc.dll (which are changed for MultiBinFS as suggested in this link. Difference is that I'm having an updated WEC7 and i'm implementing on iMX6Q).

But then I'm getting data abort exception in SDBus.dll.

I checked the debug build and below is the log.

Any help is greatly appreciated.

DEBUG LOG:

Windows CE Kernel for ARM (Thumb Enabled) Built on Mar 31 2014 at 17:35:09

ProcessorType=0c09 Revision=10 CpuId=0x412fc09a

OEMAddressTable = 80201424

Initializing VFP, FPSID=41033094

NKStartup done, starting up kernel. nCpus = 1

Windows CE KernelInit

Booting Windows CE version 7.00 for (ARM)

Memory Configuring: Total pages: 206549, Filesystem pages = 25818

Booting kernel with clean memory configuration:

Total Memory Sections:4

[0] (static): start: 80927000, extension/attributes: 0003e000, length: 0f6d5000

[1] (dynamic): start: 002d0000, extension/attributes: 00040800, length: 10000000

[2] (dynamic): start: 003d0000, extension/attributes: 00040800, length: 10000000

[3] (dynamic): start: 004d0000, extension/attributes: 0000c800, length: 03000000

Scheduling the first thread.

PID:00400002 TID:00410002 PGPOOL: Reserved 768 pages for Loader pool

PID:00400002 TID:00410002 PGPOOL: Reserved 256 pages for File pool

PID:00400002 TID:00410002 OSAXST0: Platform Name = i.MX6Q SABREAuto

PID:00400002 TID:00410002 OSAXST1: >>> Loading Module 'kd.dll' (0xC0801F30) at address 0xEFFE0000-0xEFFFE000 in Process 'NK.EXE' (0x80909AD0)

PID:00400002 TID:00410002 KD: Starting kernel debugger software probe (KdStub) - KD API version 27

PID:00400002 TID:00410002 OSAXST1: >>> Loading Module 'NK.EXE' (0x80909AD0) at address 0x80200000-0x80230000 in Process 'NK.EXE' (0x80909AD0)

PID:00400002 TID:00410002 Message Queue support initialized, g_hMsgQHeap = c48c0010

PID:00400002 TID:00500002 OSAXST1: >>> Loading Module 'filesys.dll' (0xC08027D4) at address 0xEFD10000-0xEFDD7000 in Process 'NK.EXE' (0x80909AD0)

PID:00400002 TID:00500002 OSAXST1: >>> Loading Module 'fsdmgr.dll' (0xC080290C) at address 0xEFC30000-0xEFC85000 in Process 'NK.EXE' (0x80909AD0)

PID:00400002 TID:00520002 FileSystem Starting - starting with clean file system

PID:00400002 TID:00520002 OSAXST1: >>> Loading Module 'romfsd.dll' (0xC0803000) at address 0xEFD00000-0xEFD07000 in Process 'NK.EXE' (0x80909AD0)

PID:00400002 TID:00520002 OSAXST1: >>> Loading Module 'binfs_sdmemory.dll' (0xC0805000) at address 0xEFB40000-0xEFB5B000 in Process 'NK.EXE' (0x80909AD0)

PID:00400002 TID:00520002 OSAXST1: >>> Loading Module 'binfs_sdbus.dll' (0xC0805138) at address 0xEFB60000-0xEFB9D000 in Process 'NK.EXE' (0x80909AD0)

PID:00400002 TID:00520002 OSAXST1: >>> Loading Module 'k.ceddk.dll' (0xC0805270) at address 0xEFC00000-0xEFC0E000 in Process 'NK.EXE' (0x80909AD0)

PID:00400002 TID:00520002 SDBusDriver: PROCESS_ATTACH

PID:00400002 TID:00520002 SDMemory: +SMC_Init

PID:00400002 TID:00520002 SDMemory: LoadDriver binfs_sdbus.dll.

PID:00400002 TID:00520002 SDMemory: Call SDC_Init(), hLoadDriver = 0xc0805138.

PID:00400002 TID:00520002 SDBusDriver: +SDC_Init

PID:00400002 TID:00520002 SDBusDriver: Bus Driver instance created : 0xC4833AD0 ! -SDC_Init

PID:00400002 TID:00520002 SDMemory: LoadDriver binfs_usdhc.dll.

PID:00400002 TID:00520002 OSAXST1: >>> Loading Module 'binfs_usdhc.dll' (0xC0805700) at address 0xEFBA0000-0xEFBC1000 in Process 'NK.EXE' (0x80909AD0)

PID:00400002 TID:00520002 OSAXST1: >>> Loading Module 'cspddk.dll' (0xC0805838) at address 0xEFBD0000-0xEFBEF000 in Process 'NK.EXE' (0x80909AD0)

PID:00400002 TID:00520002 SDHCDGetHCFunctions: +Init

PID:00400002 TID:00520002 SDHCDGetHCFunctions: -Init

PID:00400002 TID:00520002 SDMemory: Call SHC_Init(), hLoadDriver = 0xc0805700.

PID:00400002 TID:00520002 SDHC +Init

PID:00400002 TID:00520002 SDHC Active RegPath: Drivers\BlockDevice\USDHC

PID:00400002 TID:00520002 +CUSDHCBase::Init: Active RegPath: Drivers\BlockDevice\USDHC

PID:00400002 TID:00520002 Unknown: DEBUGCHK failed in file e:\wince700\platform\common\src\soc\common_fsl_v3\binfs_sdcard\sdbus\sdworki.cpp at line 101

KdTrap: JIT debugging requested, waiting for OEM selection

KdTrap: JIT debugging accepted

PID:00400002 TID:00520002 DEBUG_BREAK @efb92128 Ignored.

PID:00400002 TID:00520002 m_dwVendorVersion=0x0

PID:00400002 TID:00520002 SlotpOptionHandler: Caps = 0x2001013c, HSS = 0x1

PID:00400002 TID:00520002 SDHCInitialize++

PID:00400002 TID:00520002 CUSDHCBase::Start

PID:00400002 TID:00520002 CUSDHCBase::Start: PROCTL set value = 7000021

PID:00400002 TID:00520002 SDHC[3]: Using ADMA2

PID:00400002 TID:00520002 CUSDHCBase32BitADMA2:Create DMA Object for ADMA2

PID:00400002 TID:00520002 BspUSDHCInit==>

PID:00400002 TID:00520002 BspUSDHCInit1

PID:00400002 TID:00520002 sdhc3

PID:00400002 TID:00520002 SetClockRate - Requested Rate: 100000, Setting clock rate to 96679 Hz

PID:00400002 TID:00520002 SYSCTL 0x008E40FF

PID:00400002 TID:009D0002 SDHC[3] status did not change

PID:00400002 TID:00520002 SDHCInitialize--

PID:00400002 TID:00520002 -CUSDHCBase::Init

PID:00400002 TID:00520002 SDHC -Init

PID:00400002 TID:00520002 SDMemory: Load SDBUS driver Done.

PID:00400002 TID:00980002 CUSDHCBase::SetInterface: Setting for 1 bit mode

PID:00400002 TID:00980002 CUSDHCBase::SetInterface: PROCTL value = 0x7800021

PID:00400002 TID:00980002 SetClockRate - Requested Rate: 100000, Setting clock rate to 96679 Hz

PID:00400002 TID:00980002 SYSCTL 0x008E40FF

PID:00400002 TID:00980002 SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired: 100000 Hz, Actual : 96679 Hz

PID:00400002 TID:00980002 SendCommand ucCmd = 0x5, Arg = 0x0, respType = 0x5, TransferClass = 0x2

PID:00400002 TID:00980002 HandleCommandErrors - STATUS ERROR BITS=0x00010000

PID:00400002 TID:00980002 DumpCurrentRequest: 0xC4834494

PID:00400002 TID:00980002 Command: 5

PID:00400002 TID:00980002 Argument: 0x00000000

PID:00400002 TID:00980002 ResponseType: 5

PID:00400002 TID:00980002 NumBlocks: 0

PID:00400002 TID:00980002 BlockSize: 0

PID:00400002 TID:00980002 HCParam: 0

PID:00400002 TID:00980002 +DumpUSDHCRegs-------------------------

PID:00400002 TID:00980002 DSADDR 0x00000000

PID:00400002 TID:00980002 BLKATTR 0x00010200

PID:00400002 TID:00980002 CMDARG 0x00000000

PID:00400002 TID:00980002 XFERTYP 0x05020000

PID:00400002 TID:00980002 CMDRSP0 0x00000900

PID:00400002 TID:00980002 CMDRSP1 0x001D8A7F

PID:00400002 TID:00980002 CMDRSP2 0x325B5900

PID:00400002 TID:00980002 CMDRSP3 0x00000B00

PID:00400002 TID:00980002 PRSSTAT 0xFF8D8089

PID:00400002 TID:00980002 PROCTL 0x07800021

PID:00400002 TID:00980002 SYSCTL 0x008E40FF

PID:00400002 TID:00980002 IRQSTAT 0x00010000

PID:00400002 TID:00980002 AUTOC12ERR 0x00000000

PID:00400002 TID:00980002 HOSTCAPBLT 0x07F30000

PID:00400002 TID:00980002 WML 0x08800880

PID:00400002 TID:00980002 HOSTVER 0x00000003

PID:00400002 TID:00980002 -DumpUSDHCRegs-------------------------

PID:00400002 TID:00980002 HandleCommandErrors - Command line error (0x10000). Resetting CMD line.

PID:00400002 TID:00980002 SDSynchronousBusRequest_I: queue request failed(0xc0000014),TransferClass(2), CommandCode(5),CommandArgument(0)

PID:00400002 TID:00980002 SendCommand ucCmd = 0x0, Arg = 0x0, respType = 0x0, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x1, Arg = 0x400e0000, respType = 0x4, TransferClass = 0x2

PID:00400002 TID:00980002 HandleCommandErrors - STATUS ERROR BITS=0x00010000

PID:00400002 TID:00980002 DumpCurrentRequest: 0xC4834494

PID:00400002 TID:00980002 Command: 1

PID:00400002 TID:00980002 Argument: 0x400e0000

PID:00400002 TID:00980002 ResponseType: 4

PID:00400002 TID:00980002 NumBlocks: 0

PID:00400002 TID:00980002 BlockSize: 0

PID:00400002 TID:00980002 HCParam: 0

PID:00400002 TID:00980002 +DumpUSDHCRegs-------------------------

PID:00400002 TID:00980002 DSADDR 0x00000000

PID:00400002 TID:00980002 BLKATTR 0x00010200

PID:00400002 TID:00980002 CMDARG 0x400E0000

PID:00400002 TID:00980002 XFERTYP 0x01020000

PID:00400002 TID:00980002 CMDRSP0 0x00000900

PID:00400002 TID:00980002 CMDRSP1 0x001D8A7F

PID:00400002 TID:00980002 CMDRSP2 0x325B5900

PID:00400002 TID:00980002 CMDRSP3 0x00000B00

PID:00400002 TID:00980002 PRSSTAT 0xFF8D8089

PID:00400002 TID:00980002 PROCTL 0x07800021

PID:00400002 TID:00980002 SYSCTL 0x008E40FF

PID:00400002 TID:00980002 IRQSTAT 0x00010000

PID:00400002 TID:00980002 AUTOC12ERR 0x00000000

PID:00400002 TID:00980002 HOSTCAPBLT 0x07F30000

PID:00400002 TID:00980002 WML 0x08800880

PID:00400002 TID:00980002 HOSTVER 0x00000003

PID:00400002 TID:00980002 -DumpUSDHCRegs-------------------------

PID:00400002 TID:00980002 HandleCommandErrors - Command line error (0x10000). Resetting CMD line.

PID:00400002 TID:00980002 SDSynchronousBusRequest_I: queue request failed(0xc0000014),TransferClass(2), CommandCode(1),CommandArgument(400e0000)

PID:00400002 TID:00980002 SendCommand ucCmd = 0x0, Arg = 0x0, respType = 0x0, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x8, Arg = 0x15a, respType = 0x8, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x37, Arg = 0x0, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x29, Arg = 0x400e0000, respType = 0x4, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x0, Arg = 0x0, respType = 0x0, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x8, Arg = 0x15a, respType = 0x8, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x37, Arg = 0x0, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x29, Arg = 0x40040000, respType = 0x4, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x37, Arg = 0x0, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x29, Arg = 0x40040000, respType = 0x4, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x37, Arg = 0x0, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x29, Arg = 0x40040000, respType = 0x4, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x2, Arg = 0x0, respType = 0x3, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x3, Arg = 0x0, respType = 0x7, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x9, Arg = 0xe6240000, respType = 0x3, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0xd, Arg = 0xe6240000, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x7, Arg = 0xe6240000, respType = 0x2, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x37, Arg = 0xe6240000, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x33, Arg = 0x0, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00980002 SendCommand ucCmd = 0x37, Arg = 0xe6240000, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x2a, Arg = 0x0, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00980002 GetCustomRegPath

PID:00400002 TID:00980002 get the parsed CID registers

PID:00400002 TID:00980002 SD_API_SUCCESS(status)

PID:00400002 TID:00980002 SDBusDriver: built custom MMC/SD path: \Drivers\SDCARD\ClientDrivers\Custom\CID-03-DS-G40US

PID:00400002 TID:00980002 SDBusDriver: The SDIO card does not support block mode. Use Soft-Block instead.

PID:00400002 TID:00980002 SendCommand ucCmd = 0x37, Arg = 0xe6240000, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x6, Arg = 0x2, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00980002 CUSDHCBase::SetInterface: Setting for 4 bit mode

PID:00400002 TID:00980002 CUSDHCBase::SetInterface: PROCTL value = 0x7800023

PID:00400002 TID:00980002 SetClockRate - Requested Rate: 25000000, Setting clock rate to 24750000 Hz

PID:00400002 TID:00980002 SYSCTL 0x008E007F

PID:00400002 TID:00980002 SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired: 25000000 Hz, Actual : 24750000 Hz

PID:00400002 TID:00980002 The clock rate is set to 24750000PID:00400002 TID:00980002 SendCommand ucCmd = 0x6, Arg = 0x1, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00980002 SendCommand ucCmd = 0x6, Arg = 0x80000001, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00980002 CUSDHCBase::SetInterface: Setting for 4 bit mode

PID:00400002 TID:00980002 CUSDHCBase::SetInterface: PROCTL value = 0x7800023

PID:00400002 TID:00980002 SetClockRate - Requested Rate: 24750000, Setting clock rate to 24750000 Hz

PID:00400002 TID:00980002 SYSCTL 0x008E040F

PID:00400002 TID:00980002 SendCommand ucCmd = 0x7, Arg = 0x0, respType = 0x0, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x9, Arg = 0xe6240000, respType = 0x3, TransferClass = 0x2

PID:00400002 TID:00980002 SendCommand ucCmd = 0x7, Arg = 0xe6240000, respType = 0x2, TransferClass = 0x2

PID:00400002 TID:00980002 CUSDHCBase::SetInterface: Setting for 4 bit mode

PID:00400002 TID:00980002 CUSDHCBase::SetInterface: PROCTL value = 0x7800023

PID:00400002 TID:00980002 SetClockRate - Requested Rate: 50000000, Setting clock rate to 49500000 Hz

PID:00400002 TID:00980002 SYSCTL 0x008E003F

PID:00400002 TID:00980002 The clock rate is set to 50000000PID:00400002 TID:00980002 LoadDevice: type = 2, slot 0PID:00400002 TID:00980002 SDLoadDevice

PID:00400002 TID:00980002 GetCustomRegPath

PID:00400002 TID:00980002 get the parsed CID registers

PID:00400002 TID:00980002 SD_API_SUCCESS(status)

PID:00400002 TID:00980002 SDBusDriver: built custom MMC/SD path: \Drivers\SDCARD\ClientDrivers\Custom\CID-03-DS-G40US

PID:00400002 TID:00980002 SDLoadDevice no CUSTOM driver path was found so set the default path

PID:00400002 TID:00980002 SDLoadDevice Device_SD_Memory == m_DeviceType || Device_SD_Combo == m_DeviceType

PID:00400002 TID:00980002 SDLoadDevice SDLoadDevice Device_SD_Memory == m_DeviceType || Device_SD_Combo == m_DeviceType BSP_SUPPORT_MULTIBIN

PID:00400002 TID:00980002 SDLoadDevice SUCCEEDED(hr)

PID:00400002 TID:00980002 SDLoadDevice ASSERT(deviceFound);

PID:00400002 TID:00980002 SDLoadDevice GetHostContainer

PID:00400002 TID:00980002 SDLoadDevice status = SD_API_STATUS_UNSUCCESSFUL;

PID:00400002 TID:00980002 SDLoadDevice new DeviceFolder

PID:00400002 TID:00980002 DeviceFolder::DeviceFolder

PID:00400002 TID:00980002 SDLoadDevice m_pDriverFolder->Init

PID:00400002 TID:00980002 DeviceFolder::AddInitReg

PID:00400002 TID:00980002 SDLoadDevice m_pDriverFolder->AddRef

PID:00400002 TID:00980002 SDLoadDevice Ready

PID:00400002 TID:00980002 DeviceFolder::LoadDevice

PID:00400002 TID:00980002 Exception 'Data Abort' (0x4): Thread-Id=00980002(pth=c0806700), Proc-Id=00400002(pprc=80909ad0) 'NK.EXE', VM-active=00400002(pprc=80909ad0) 'NK.EXE'

PID:00400002 TID:00980002 PC=efe4d908(k.coredll.dll+0x0004d908) RA=00000030(???+0x00000030) SP=ccb1f778, BVA=00000030

PID:00400002 TID:00980002 RtlDispatchException: returning failure. Flags=0

KdTrap: JIT debugging requested, waiting for OEM selection

KdTrap: JIT debugging accepted

PID:00400002 TID:00980002

Unhandled exception c0000005:

PID:00400002 TID:00980002 Secondary thread in proc 00400002 faulted, Exception code = c0000005, Exception Address = efe4d908!

Any help is greatly appreciated.

Thanks.

Regards,

Keshava

Re: WEC7, iMX6Q : SDBUS error in MultiBinFS implementation on SD

KeshavaGN — Wed, 13 Aug 2014 13:05:05 GMT

Hi Qiang_FSL , Deactivated user , sunajiang , huzizhen , henrylee , holyyuan can you help on this?

Thanks

Re: WEC7, iMX6Q : SDBUS error in MultiBinFS implementation on SD

qiang_li-mpu_se — Thu, 14 Aug 2014 09:38:59 GMT

Hi Keshava, I think you can use my original "WINCE700\PLATFORM\COMMON\SRC\SOC\COMMON_FSL_V3\BINFS_SDCARD\" to try. Those codes are not hardware related.

Re: WEC7, iMX6Q : SDBUS error in MultiBinFS implementation on SD

qiang_li-mpu_se — Thu, 14 Aug 2014 09:52:56 GMT

By the way, I found your code "BOOL CSDWorkItem::Init(DWORD dwCeThreadPriority)" is wrong, that error "ASSERT(FALSE);" will always happen, even though bRet=TRUE;

Then the "Unlock();" will never be called.

My original code is based on "wince700\public\COMMON\oak\drivers\sdcard\sdbus", but I found your code is not from there.

For MultiBIN system, NK.nb0 was not used, the final image is xip.nb0.

Re: WEC7, iMX6Q : SDBUS error in MultiBinFS implementation on SD

KeshavaGN — Thu, 14 Aug 2014 09:55:34 GMT

Hi Qiang_FSL,

As i already mentioned, initially I tried it..

But I was getting build errors (may be because of updates?)

BUILD: [02:0000000112:ERRORE] Error(s) in directory "E:\WINCE700\platform\common\src\soc\COMMON_FSL_V3\BINFS_SDCARD\SDBUS\".

BUILD: [02:0000000113:ERRORE] e:\wince700\public\common\ddk\inc\cesdbus.h(202) : error C2146: syntax error : missing ';' before identifier 'pAdaptiveControl'

BUILD: [02:0000000114:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2059: syntax error : '<L_TYPE_raw>'

BUILD: [02:0000000115:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2238: unexpected token(s) preceding ';'

BUILD: [02:0000000116:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(448) : error C2061: syntax error : identifier 'PSD_CARD_STATUS'

BUILD: [02:0000000121:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2059: syntax error : '<L_TYPE_raw>'

BUILD: [02:0000000122:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2238: unexpected token(s) preceding ';'

BUILD: [02:0000000123:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(448) : error C2061: syntax error : identifier 'PSD_CARD_STATUS'

BUILD: [02:0000000124:ERRORE] e:\wince700\public\common\ddk\inc\cesdbus.h(202) : error C2146: syntax error : missing ';' before identifier 'pAdaptiveControl'

BUILD: [02:0000000128:ERRORE] e:\wince700\public\common\ddk\inc\cesdbus.h(202) : error C2146: syntax error : missing ';' before identifier 'pAdaptiveControl'

BUILD: [02:0000000129:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2059: syntax error : '<L_TYPE_raw>'

BUILD: [02:0000000130:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2238: unexpected token(s) preceding ';'

BUILD: [02:0000000131:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(448) : error C2061: syntax error : identifier 'PSD_CARD_STATUS'

BUILD: [02:0000000134:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2059: syntax error : '<L_TYPE_raw>'

BUILD: [02:0000000135:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2238: unexpected token(s) preceding ';'

BUILD: [02:0000000136:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(448) : error C2061: syntax error : identifier 'PSD_CARD_STATUS'

BUILD: [01:0000000137:ERRORE] Error(s) in directory "E:\WINCE700\platform\common\src\soc\COMMON_FSL_V3\BINFS_SDCARD\SDCARDLIB\".

BUILD: [01:0000000138:ERRORE] e:\wince700\platform\common\src\soc\common_fsl_v3\binfs_sdcard\sdcardlib\busacc.cpp(41) : error C2440: '=' : cannot convert from 'void (__cdecl *)(HBUS_REQUEST)' to 'PSD_FREE_BUS_REQUEST'

BUILD: [01:0000000140:ERRORE] e:\wince700\platform\common\src\soc\common_fsl_v3\binfs_sdcard\sdcardlib\busacc.cpp(47) : error C2440: '=' : cannot convert from 'void (__cdecl *)(SD_DEVICE_HANDLE)' to 'PSD_IO_DISCONNECT_INTERRUPT'

BUILD: [02:0000000144:ERRORE] e:\wince700\public\common\ddk\inc\cesdbus.h(202) : error C2146: syntax error : missing ';' before identifier 'pAdaptiveControl'

BUILD: [02:0000000145:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2059: syntax error : '<L_TYPE_raw>'

BUILD: [02:0000000146:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2238: unexpected token(s) preceding ';'

BUILD: [02:0000000147:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(448) : error C2061: syntax error : identifier 'PSD_CARD_STATUS'

BUILD: [01:0000000150:ERRORE] NMAKE : fatal error U1077: 'E:\WINCE700\sdk\bin\i386\ARM\cl.EXE' : return code '0x2'

BUILD: [01:0000000152:ERRORE] clean TargetCompilePass -nologo BUILDMSG=Stop. BUILDROOT=E:\WINCE700\platform\common CLEANBUILD=1 NOLINK=1 NOPASS0=1 failed - rc = 2.

BUILD: [02:0000000153:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2059: syntax error : '<L_TYPE_raw>'

BUILD: [02:0000000154:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2238: unexpected token(s) preceding ';'

BUILD: [02:0000000155:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(448) : error C2061: syntax error : identifier 'PSD_CARD_STATUS'

BUILD: [02:0000000157:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2059: syntax error : '<L_TYPE_raw>'

BUILD: [02:0000000158:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2238: unexpected token(s) preceding ';'

BUILD: [02:0000000159:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(448) : error C2061: syntax error : identifier 'PSD_CARD_STATUS'

BUILD: [02:0000000161:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2059: syntax error : '<L_TYPE_raw>'

BUILD: [02:0000000162:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(241) : error C2238: unexpected token(s) preceding ';'

BUILD: [02:0000000163:ERRORE] e:\wince700\public\common\oak\inc\sdhcd.h(448) : error C2061: syntax error : identifier 'PSD_CARD_STATUS'

BUILD: [02:0000000165:ERRORE] e:\wince700\public\common\ddk\inc\cesdbus.h(202) : error C2146: syntax error : missing ';' before identifier 'pAdaptiveControl'

BUILD: [02:0000000168:ERRORE] NMAKE : fatal error U1077: 'E:\WINCE700\sdk\bin\i386\ARM\cl.EXE' : return code '0x2'

Hence I cloned my own SDBus, SDMemory etc.

Can you please try the code on updated WEC7 system and let me know the result?

Thanks & regards,

Keshava

Re: WEC7, iMX6Q : SDBUS error in MultiBinFS implementation on SD

KeshavaGN — Thu, 14 Aug 2014 10:56:41 GMT

Hi Qiang_FSL ,

I have edited the code little more so that I can get a code similar to your's ,

and I am not getting exception in SDBus/SDMemory.

So, now SDMemory initialization is completed.

I'm getting the following prints:

PID:00400002 TID:00980002 SDHCGetLocalAdaptiveControl_I: type = 2, slot 0PID:00400002 TID:00980002 SDHCUpcallSetAdaptiveControl_I: type = 2, slot 0PID:00400002 TID:00520002 SDGetDeviceHandle: ActivePath: Drivers\BlockDevice\SDMMC

PID:00400002 TID:00520002 SDGetClientFunctions: +Init

PID:00400002 TID:00520002 SDGetClientFunctions: -Init

PID:00400002 TID:00520002 SDMemCardConfig: Card is high capacity (2.0+)

PID:00400002 TID:00520002 SDMemCalcDataAccessClocks: Tpd:f ns, Asynch: f ns, AsyncClocks:0 , SyncClocks: 1077149696, ReadTotal: 0, Write Factor: 1093567616 WriteTotal: 50000

PID:00400002 TID:00520002 SDMemory: Initialize: Using block transfer size of 64 blocks

PID:00400002 TID:00520002 SDMemory: Idle Timeout: 2000 Idle Power State: 2

PID:00400002 TID:00520002 SDCard: Warning: Please call SDInitializeCardLib to avoid race conditions

PID:00400002 TID:00520002 SDMemory: Power Management Setup complete

PID:00400002 TID:00520002 SDMemory: -SMC_Init

But theoretically what should happen once the sdmemory initialization is completed? Can you please guide on this? Because I'm getting exceptions in coredll.

Thanks

Regards,

Keshava

Re: WEC7, iMX6Q : SDBUS error in MultiBinFS implementation on SD

KeshavaGN — Thu, 14 Aug 2014 14:56:33 GMT

The new log :

It's unloading filesys.dll and after that showing exception in fsdmgr.dll . Please help:

Microsoft Windows CE Ethernet Bootloader 1.0 for MX6Q SABREAuto (Aug 12 2014 17:29:10)

INFO: Loading boot configuration from SDHC

INFO: Successfully loaded boot configuration from SDHC

3 seconds.

-----------------------------------------------------------------------------

Freescale iMX SOC Menu Item

-----------------------------------------------------------------------------

[0] IP Address : 192.168.2.5

[1] Set IP Mask : 255.255.255.0

[2] Boot Delay : 3

[3] DHCP : Disabled

[4] Reset to Factory Default Configuration

[5] Select Boot Device : NK from SD/MMC

[6] Set MAC Address : ff-ff-ff-ff-ff-ff

[7] Format OS NAND Region

[8] Format All NAND Regions

[9] Bootloader Shell

[I] KITL Work Mode : Interrupt

[K] KITL Enable Mode : Enable

[P] KITL Passive Mode : Disable

[S] Save Settings

[D] Download Image Now

[L] Launch Existing Flash Resident Image Now

[E] Select Ether Device : ENET

[M] MMC and SD Utilities : SDHC[3] is activated

[A] ATA Utilities

Selection: k

-----------------------------------------------------------------------------

Freescale iMX SOC Menu Item (UNSAVED CHANGES)

-----------------------------------------------------------------------------

[0] IP Address : 192.168.2.5

[1] Set IP Mask : 255.255.255.0

[2] Boot Delay : 3

[3] DHCP : Disabled

[4] Reset to Factory Default Configuration

[5] Select Boot Device : NK from SD/MMC

[6] Set MAC Address : ff-ff-ff-ff-ff-ff

[7] Format OS NAND Region

[8] Format All NAND Regions

[9] Bootloader Shell

[I] KITL Work Mode : Interrupt

[K] KITL Enable Mode : Disable

[P] KITL Passive Mode : Disable

[S] Save Settings

[D] Download Image Now

[L] Launch Existing Flash Resident Image Now

[E] Select Ether Device : ENET

[M] MMC and SD Utilities : SDHC[3] is activated

[A] ATA Utilities

Selection: s

INFO: Storing boot configuration to SDHC

INFO: Successfully stored boot configuration to SDHC

-----------------------------------------------------------------------------

Freescale iMX SOC Menu Item

-----------------------------------------------------------------------------

[0] IP Address : 192.168.2.5

[1] Set IP Mask : 255.255.255.0

[2] Boot Delay : 3

[3] DHCP : Disabled

[4] Reset to Factory Default Configuration

[5] Select Boot Device : NK from SD/MMC

[6] Set MAC Address : ff-ff-ff-ff-ff-ff

[7] Format OS NAND Region

[8] Format All NAND Regions

[9] Bootloader Shell

[I] KITL Work Mode : Interrupt

[K] KITL Enable Mode : Disable

[P] KITL Passive Mode : Disable

[S] Save Settings

[D] Download Image Now

[L] Launch Existing Flash Resident Image Now

[E] Select Ether Device : ENET

[M] MMC and SD Utilities : SDHC[3] is activated

[A] ATA Utilities

Selection: l

INFO: Reading NK image to SDHC (please wait)...

INFO: Copying NK image to RAM address 0xa0200000

INFO: Copying NK image size 0x700000 BYTEs.

INFO: Read is 100% complete

INFO: Copy of NK completed successfully

Either card is not eSD2.1, or boot partition is not created yet

Windows CE Kernel for ARM (Thumb Enabled)

PID:00400002 TID:00520002 m_dwVendorVersion=0x0

PID:00400002 TID:00520002 CUSDHCBase::Start

PID:00400002 TID:00520002 SDHC[3]: Using ADMA2

PID:00400002 TID:00520002 BspUSDHCInit==>

PID:00400002 TID:00520002 BspUSDHCInit1

PID:00400002 TID:00520002 sdhc3

PID:00400002 TID:00520002 SYSCTL 0x008E40FF

PID:00400002 TID:00960002 SYSCTL 0x008E40FF

PID:00400002 TID:00960002 SendCommand ucCmd = 0x5, Arg = 0x0, respType = 0x5, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x0, Arg = 0x0, respType = 0x0, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x1, Arg = 0x400e0000, respType = 0x4, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x0, Arg = 0x0, respType = 0x0, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x8, Arg = 0x15a, respType = 0x8, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x37, Arg = 0x0, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x29, Arg = 0x400e0000, respType = 0x4, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x0, Arg = 0x0, respType = 0x0, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x8, Arg = 0x15a, respType = 0x8, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x37, Arg = 0x0, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x29, Arg = 0x40040000, respType = 0x4, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x37, Arg = 0x0, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x29, Arg = 0x40040000, respType = 0x4, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x37, Arg = 0x0, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x29, Arg = 0x40040000, respType = 0x4, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x2, Arg = 0x0, respType = 0x3, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x3, Arg = 0x0, respType = 0x7, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x9, Arg = 0xe6240000, respType = 0x3, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0xd, Arg = 0xe6240000, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x7, Arg = 0xe6240000, respType = 0x2, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x37, Arg = 0xe6240000, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x33, Arg = 0x0, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00960002 SendCommand ucCmd = 0x37, Arg = 0xe6240000, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x2a, Arg = 0x0, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00960002 GetCustomRegPath

PID:00400002 TID:00960002 get the parsed CID registers

PID:00400002 TID:00960002 SD_API_SUCCESS(status)

PID:00400002 TID:00960002 SDBusDriver: built custom MMC/SD path: \Drivers\SDCARD\ClientDrivers\Custom\CID-03-DS-G40US

PID:00400002 TID:00960002 SendCommand ucCmd = 0x37, Arg = 0xe6240000, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x6, Arg = 0x2, respType = 0x1, TransferClass = 0x2

PID:00400002 TID:00960002 SYSCTL 0x008E007F

PID:00400002 TID:00960002 SendCommand ucCmd = 0x6, Arg = 0x1, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00960002 SendCommand ucCmd = 0x6, Arg = 0x80000001, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00960002 SYSCTL 0x008E040F

PID:00400002 TID:00960002 SendCommand ucCmd = 0x7, Arg = 0x0, respType = 0x0, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x9, Arg = 0xe6240000, respType = 0x3, TransferClass = 0x2

PID:00400002 TID:00960002 SendCommand ucCmd = 0x7, Arg = 0xe6240000, respType = 0x2, TransferClass = 0x2

PID:00400002 TID:00960002 SYSCTL 0x008E003F

PID:00400002 TID:00960002 SDLoadDevice

PID:00400002 TID:00960002 GetCustomRegPath

PID:00400002 TID:00960002 get the parsed CID registers

PID:00400002 TID:00960002 SD_API_SUCCESS(status)

PID:00400002 TID:00960002 SDBusDriver: built custom MMC/SD path: \Drivers\SDCARD\ClientDrivers\Custom\CID-03-DS-G40US

PID:00400002 TID:00960002 SDLoadDevice no CUSTOM driver path was found so set the default path

PID:00400002 TID:00960002 SDLoadDevice Device_SD_Memory == m_DeviceType || Device_SD_Combo == m_DeviceType

PID:00400002 TID:00960002 SDLoadDevice SDLoadDevice Device_SD_Memory == m_DeviceType || Device_SD_Combo == m_DeviceType BSP_SUPPORT_MULTIBIN

PID:00400002 TID:00960002 SDLoadDevice SUCCEEDED(hr)

PID:00400002 TID:00960002 SDLoadDevice ASSERT(deviceFound);

PID:00400002 TID:00960002 SDLoadDevice GetHostContainer

PID:00400002 TID:00960002 SDLoadDevice status = SD_API_STATUS_UNSUCCESSFUL;

PID:00400002 TID:00960002 SDLoadDevice new DeviceFolder

PID:00400002 TID:00960002 DeviceFolder::DeviceFolder

PID:00400002 TID:00960002 SDLoadDevice m_pDriverFolder->Init

PID:00400002 TID:00960002 DeviceFolder::AddInitReg

PID:00400002 TID:00960002 SDLoadDevice m_pDriverFolder->AddRef

PID:00400002 TID:00960002 SDLoadDevice Ready

PID:00400002 TID:00960002 DeviceFolder::LoadDevice

PID:00400002 TID:00960002 SDLoadDevice LoadDevice

PID:00400002 TID:00960002 SDLoadDevice RegOpenKeyEx

PID:00400002 TID:00520002 SDMemory: +-SMC_Open

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x0, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x21902, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x0, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x902, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2902, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x7bb3, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x12, Arg = 0x7bb4, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:009B0002 SendCommand ucCmd = 0xc, Arg = 0x0, respType = 0x2, TransferClass = 0x2

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x7bbc, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2c91, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2c92, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2999, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29b1, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2989, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x298a, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb5, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29a9, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29aa, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb5, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb6, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2991, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2992, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb6, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2991, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2992, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb6, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb7, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2949, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x294a, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb7, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2959, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29c1, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29c2, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb7, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2939, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x293a, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb7, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2929, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2949, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x294a, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb7, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb8, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2949, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x294a, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb8, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2f41, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2949, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x294a, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb8, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29d9, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2949, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x294a, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb8, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb9, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2969, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x296a, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb9, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2941, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2942, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb9, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2941, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2942, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eb9, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eba, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2941, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2942, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eba, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2941, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2942, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eba, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2951, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2952, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6eba, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebb, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2951, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2952, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebb, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2999, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x299a, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebb, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebc, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2999, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x299a, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebc, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29a1, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29a2, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebc, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29a1, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29a2, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebc, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebd, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29a1, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29a2, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebd, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2981, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2982, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebd, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2981, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2982, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebd, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebe, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29b1, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29b2, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebe, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2981, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2982, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebe, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebf, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2941, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2942, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebf, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2951, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x2952, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebf, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29b9, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x29ba, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ebf, respType = 0x1, TransferClass = 0x0

PID:00400002 TID:00520002 SendCommand ucCmd = 0x11, Arg = 0x6ec0, respType = 0x1, TransferClass = 0x0