Building the image

unaigonzalez — Wed, 04 Mar 2015 11:19:35 GMT

Hello,

I am working with i.mx28. I am trying to build a kernel with a new

configuration, so, following your step by step guide I saw that the resulting

file is not complete.

The point is, that after I build with ./ltib command, I expect to have a big

rootfs.ext2 as image, but I only have a 11Mbit file. When I use CF Imager

to set up my SD and I use it on the i.mx28, the error: Kernel panic appear.

Re: Building the image

Yuri — Thu, 05 Mar 2015 05:02:33 GMT

Please look at my comments below.

1.
Default build configuration is minimal, so the rootfs is not big.

Please select LTIB configuration as FSL_gnome, for example.

Please try the mfg tool to deploy the image to Your board.

3.
If Your board and i.MX28 EVK differ - it may cause kernel panic.

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic Building the image in i.MX Processors

Building the image

Re: Building the image