i.MX ProcessorsのトピックRe: i.mx6q sensor camera

i.mx6q sensor camera

姬开通 — Thu, 11 Sep 2014 01:11:35 GMT

Dear all,who can give me the driver and the application program for the i.mx6q?and if the resource on the internet where can i download it

Re: i.mx6q sensor camera

igorpadykov — Thu, 11 Sep 2014 02:11:20 GMT

Hi 姬开通姬

most simple test program is in SDK: i.MX 6Series Platform SDK : Bare-metal SDK for the i.MX

please read document iMX6_Firmware_Guide.pdf

For Linux check page below:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q&nodeId=018rH3ZrDRB24A&fpsp=1&tab=Design_Tools_Tab

Operating System Software-Board Support Packages (28)

L3.0.35_4.1.0_ER_SOURCE_BSP : i.MX 6Quad, i.MX 6Dual, i.MX 6DualLite, i.MX 6Solo and i.MX 6Sololite Linux BSP Source Code Files.

L3.0.35_4.1.0_DEMO_IMAGE_BSP : i.MX 6Quad, i.MX 6Dual, i.MX 6DualLite, i.MX 6Solo and i.MX 6Sololite Linux Binary Demo Files.

L3.0.35_4.1.0_LINUX_DOCS

read in last package below documents:

i.MX_6Dual6Quad_Linux_Reference_Manual.pdf, i.MX_6Dual6Quad_SABRE-SD_Linux_Release_Notes.pdf

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: i.mx6q sensor camera

姬开通 — Thu, 11 Sep 2014 02:14:50 GMT

i need the sensor camera codes such as mt9p031 , driver and the application program for the i.mx6q

Re: i.mx6q sensor camera

igorpadykov — Thu, 11 Sep 2014 03:40:45 GMT

https://support.bluetechnix.at/wiki/Linux_Software_User_Manual_%28i.MX6%29#Camera_Module_ISM-MT9P031

Re: i.mx6q sensor camera

姬开通 — Thu, 11 Sep 2014 05:26:30 GMT

8.9 Camera Module ISM-MT9P031

DEV-i.MX6

≥V1.0

This module is available with Monochrome or Bayer-RGB field array. They cannot be distinguished in software!

Kernel module

ism-mt9xx31_camera.ko

Note: This driver handles ISM-MT9M131 and ISM-MT9P031 cameras.

Kernel module parameters
- testpattern: Test pattern: 0=disable (default), 1=Color field, 2=Horizontal gradient, 3=Vertical gradient, 4=Diagonal gradient, 5=Classic test pattern, 6=Walking 1s, 7=Monochrome horizontal bars, 8=Monochrome vertical bars, 9=Vertical color bars
- sensorwidth: Sensor width, default 2592
- sensorheight: Sensor height, default 1944
- datawidth: Data width: 8 (default), 12 bits
- rotate: Rotate by 180°, 0=no (default), 1=yes
- shutterwidth: Shutter width, default (sensorheight-1)

Camera Control Utility

Basic initialization of the sensor chip is done by the device driver, but this utility allows customers to easily evaluate and configure sensor values according to their needs.

/opt/blt/camctl/mt9xx31-ctl

Usage:

./mt9xx31-ctl <register> ...........read register value ./mt9xx31-ctl <register> <value> ...write register value

<register> is in hex 16-bit, e.g. 0x3000

<value> is either hex 16-bit (0x2400) or decimal (9216)

Unit test

/opt/blt/unit-tests/ism_mt9p031.sh

as the description driver is the mt9xx31-ctl application is the ism_mt9p031.sh,the path is under the file.and where is the file?

Re: i.mx6q sensor camera

igorpadykov — Thu, 11 Sep 2014 10:18:04 GMT

please post this to support.bluetechnix

as Freescale BSPs support only OV5640,OV5642

Re: i.mx6q sensor camera

姬开通 — Fri, 12 Sep 2014 01:58:23 GMT

can you give me the test application code to the OV5640,and send to me.

Re: i.mx6q sensor camera

igorpadykov — Fri, 12 Sep 2014 02:00:24 GMT

see above answer with links.

Re: i.mx6q sensor camera

姬开通 — Fri, 12 Sep 2014 02:30:51 GMT

where i can get the L3.0.35_4.1.0_130816_source.tar.gz?can you send it to me.

Re: i.mx6q sensor camera

igorpadykov — Fri, 12 Sep 2014 10:10:04 GMT

L3.0.35_4.1.0_ER_SOURCE_BSP

actually all software is located on link below

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q&nodeId=018rH3ZrDRB24A&fpsp=1&tab=Design_Tools_Tab

Best regards

igor