topic Re: Can i use the Mfgtool from commandline in i.MX Processors

Can i use the Mfgtool from commandline

anch — Tue, 18 Nov 2014 17:24:53 GMT

Can i use the Mfgtool from commandline. I can flash my iMX6 from UI.

To use Mfgtool from commandline, i have used this command "MfgTool2.exe –noui –c “MX6Q Linux Update” –l “Sabre-SD” –p 4"

but the problem is it opens the Userinterface. It doesnot flash when i close the UI. Does anyone has any idea?

Re: Can i use the Mfgtool from commandline

Yuri — Wed, 19 Nov 2014 04:50:19 GMT

Please use the recent MFG, where scripts .vbs in the MFG package may be used.

Set wshShell = CreateObject("WScript.shell")

wshShell.run "mfgtool2.exe -noui -c ""linux"" -l ""SDCard"" -s ""board=sabresd"" -s ""mmc=0"" "

Set wshShell = Nothing

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Can i use the Mfgtool from commandline

anch — Wed, 19 Nov 2014 05:26:50 GMT

hi Yuri

thanks for the response, this post definitely answers my question. but could you tell me where i could find the latest MFG.

When i did a search, i found only the source code, which says it can be used for imX50, 51... but not iMX6.

Do i have to build the source code or i can i download it somewhere on the site?

I have found one Mfgtool for downloading images to iMX6 series, Rev 12.10.02. Can i use this from command line?

Thanks

Re: Can i use the Mfgtool from commandline

Yuri — Fri, 21 Nov 2014 07:50:28 GMT

https://www.freescale.com/webapp/Download?colCode=IMX_6_MFG_L3.10.17_1.0.0_TOOL&appType=license&location=null&fasp=1&WT_…

https://www.freescale.com/webapp/Download?colCode=IMX_6_MFG_L3.10.17_1.0.2_TOOL&appType=license&location=null&fasp=1&WT_…

Summary Page :

i.MX6Q|i.MX 6Quad Processors|Quad Core|Freescale

~Yuri.

Re: Can i use the Mfgtool from commandline

anch — Fri, 21 Nov 2014 10:09:14 GMT

thanks for the links Yuri.

I will give it a try.

thanks once agaubn