SABRE SDB HDMI not working

Jochi119 — Fri, 27 Feb 2015 18:47:20 GMT

Hello,

I am using the SABRE SDB platform and have loaded the Timesys files from their getting started page, but can't seem to get an output on my HDMI monitor. I can get to the busy box terminal, but nothing on the HDMI screen. If I disconnect and reconnect the screen, I get the message that is shown below:

I will post the printout from Uboot below:

Any Help would be greatly appreciated.

Re: SABRE SDB HDMI not working

igorpadykov — Mon, 02 Mar 2015 02:35:28 GMT

Hi Joseph

suggest to check with Freescale Demo images on link below

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RDIMX6SABREBRD&fpsp=1&tab=Design_Tools_Tab

L3.0.35_4.1.0_DEMO_IMAGE_BSP L3.10.53_1.1.0_iMX6QDLS_Bundle

also are you using "True" HDMI display ? (with special HDMI cable), not

just a HDMI - DVI adapter. In general one can also try other HDMI panel.

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

i.MX ProcessorsのトピックSABRE SDB HDMI not working

SABRE SDB HDMI not working

Re: SABRE SDB HDMI not working