i.MX ProcessorsのトピックI.MX6. 24M crystal cannot work,

I.MX6. 24M crystal cannot work,

星辰王 — Mon, 23 Mar 2015 10:04:48 GMT

Hi ,ALL!

I need help of I.MX6. my board cannot up because of 24M crystal canot work,

I measure pin NVCC_PLL_OUT is 1.1V, but XTALI keep low (XTALO can up to 1.1V).

This is caused by what reason，let me known， thanks a lot.

Re: I.MX6. 24M crystal cannot work,

Yuri — Thu, 09 Apr 2015 10:19:14 GMT

Please check Your design regarding 24 MHz oscillator requirements in
Table 2-7 (Oscillator and clock recommendations) of the Hardware Development
Guide for i.MX 6Quad, 6Dual, 6DualLite, 6Solo Families of Applications Processors
(IMX6DQ6SDLHDG).
In particular, please pay attention on the EB830 document.

https://freescale.hosted.jivesoftware.com/docs/DOC-93757

https://freescale.hosted.jivesoftware.com/servlet/JiveServlet/downloadBody/93757-102-4-3688/EB830%20-%20i.MX6%20Crystal%20Drive%20Level.pdf

http://cache.freescale.com/files/32bit/doc/user_guide/IMX6DQ6SDLHDG.pdf

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

This an automatic process. We are marking this post as s...

CommunityBot — Thu, 03 Sep 2020 14:55:21 GMT

This an automatic process.

We are marking this post as solved, due to the either low activity or any reply marked as correct.

If you have additional questions, please create a new post and reference to this closed post.

NXP Community!