i.MX ProcessorsのトピックHow to enable TLV320 on IMX6Q SD

How to enable TLV320 on IMX6Q SD

何继鑫 — Thu, 26 Feb 2015 02:59:28 GMT

Hi everybody,I have a board with audio chip TLV320AIC23BPW.My CPU is IMX6Q. And with the connection like this

connection of the codec:

i.mx6q <--> tlv320aic23b(pin)

AUD3_TXFS LRCIN(5), LRCOUT(7)

AUD3_TXD DIN(4)

AUD3_RXD DOUT(6)

AUD3_TXC BCLK(3)

CCM_CLKO XTI(25)

I2C2_SDA SDIN(23)

I2C2_SCL SCLK(24)

I used ubuntu12.04 ltib L3.0.35_4.1.0_130816_source.tar.gz for compile

I followed How to enable TLV320 on IMX6Q?,but still not work.

always appera

ALSA devices list:

no sound cards found

in the bootmessage.

What should I do for this?

I have my /arch/arm/mach-mx6/board-mx6q-serbesd.c and /sound/soc/imx/imx-sgtl5000.c below.

Original Attachment has been moved to: board-mx6q_sabresd.c.txt.zip

Original Attachment has been moved to: imx-sgtl5000.c.txt.zip

Re: How to enable TLV320 on IMX6Q SD

jimmychan — Fri, 27 Feb 2015 06:06:59 GMT

Seems you didn't follow the changing mentioned in How to enable TLV320 on IMX6Q?

At least, the IOMUX setting and the I2C2 setting for your TLV320 cannot be found in your code.

Re: How to enable TLV320 on IMX6Q SD

何继鑫 — Fri, 27 Feb 2015 07:10:29 GMT

Thank you for your reply.

but the IOMUX is in the board-mx6q_sabresd.h,which I have not changed.

it's a little difference between sabresd and sabrelite

Re: How to enable TLV320 on IMX6Q SD

jimmychan — Fri, 27 Feb 2015 07:39:53 GMT

can you show me your board-mx6q_sabresd.h?

Re: Re: How to enable TLV320 on IMX6Q SD

何继鑫 — Fri, 27 Feb 2015 07:51:08 GMT

OK !

Re: How to enable TLV320 on IMX6Q SD

jimmychan — Fri, 27 Feb 2015 10:13:12 GMT

so, on your board, is the pins you used like this?

CSI0_DAT4 -> AUD3_TXFS

CSI0_DAT5 -> AUD3_TXD

CSI0_DAT6 -> AUD3_RXD

CSI0_DAT7 -> AUD3_TXC

GPIO_0 -> CCM_CLKO

KEY_COL3 -> I2C2_SDA

KEY_ROW3 -> I2C2_SCL

Re: How to enable TLV320 on IMX6Q SD

何继鑫 — Sat, 28 Feb 2015 01:38:52 GMT

No,it's like this

CSI0_DAT4 -> AUD3_TXC

CSI0_DAT5 -> AUD3_TXD

CSI0_DAT6 -> AUD3_TXFS

CSI0_DAT7 -> AUD3_RXD

GPIO_0 -> CCM_CLKO

KEY_COL3 -> I2C2_SCL

KEY_ROW3 -> I2C2_SDA

Re: How to enable TLV320 on IMX6Q SD

jimmychan — Sat, 28 Feb 2015 02:39:15 GMT

Seems you all settings are correct.

Did you select the SND_SOC_IMX_SGTL5000 in the kernel?

According to Alex's answer from How to enable TLV320 on IMX6Q?

===================================================

To achieve all this, ASoC basically splits an embedded audio system into 3 components:

Codec driver: The codec driver is platform independent and contains audio controls, audio interface capabilities, codec dapm definition and codec IO functions.

already in the Linux kernel, selected by "select SND_SOC_TLV320AIC23" in sound/soc/imx/Kconfig

http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/sound/soc/codecs/tlv320aic23.c?h=imx_3.0.35_4.1.0

Platform driver: The platform driver contains the audio dma engine and audio interface drivers (e.g. I2S, AC97, PCM) for that platform.

already in the Linux kernel, selected by "select SND_MXC_SOC_MX2" in sound/soc/imx/Kconfig

Machine driver: The machine driver handles any machine specific controls and audio events. i.e. turing on an amp at start of playback.

finally, we need a small portion of the initialization (arch/arm/mach-mx6/board-mx6q_xxx.c) and the "glue" (sound/soc/imx/imx-xxx.c), I gave an example of how we did it

Re: Re: How to enable TLV320 on IMX6Q SD

何继鑫 — Sat, 28 Feb 2015 03:33:12 GMT

Of caurse I have selected SND_SOC_IMX_SGTL5000 in the kernel.and I have changed the /sound/soc/imx/Kconfig ,I have select SND_MXC_SOC_MX2 in the Kconfig

Re: Re: How to enable TLV320 on IMX6Q SD

jimmychan — Sat, 28 Feb 2015 04:42:24 GMT

have you try to type dmesg to check whether the driver can probe successful or not?

Re: Re: Re: How to enable TLV320 on IMX6Q SD

何继鑫 — Sat, 28 Feb 2015 05:56:49 GMT

I have insert some printk in the sound/soc/codecs/tlv320aic23.c ,it seems like the tlv320aic23_modinit and tlv320aic23_codec_probe is probe successful ,but the tlv320aic23_probe has not probed.

I have insert these in the tlv320aic23.c

ln 623 printk("tlv320aic23 controls!\n");

ln 719 printk("tlv320aic23 probe!ret=%d\n",ret);

ln 754 printk("tlv320aic23 init!\n");

but in my dmesg I cannot find the "tlv320aic23 controls!"

is there any where I have not set well?

Re: How to enable TLV320 on IMX6Q SD

Sasamy — Sat, 28 Feb 2015 07:00:56 GMT

Hello, I think you need to remove unnecessary code

static int __init imx_sgtl5000_init(void)

{

int ret;

ret = platform_driver_register(&imx_sgtl5000_audio_driver);

if (ret)

return -ENOMEM;

-- if (cpu_is_mx6q())

-- imx_sgtl5000_dai[0].codec_name = "tlv320aic23-codec.0-001a";

-- else

imx_sgtl5000_dai[0].codec_name = "tlv320aic23-codec.1-001a";

because in your case, the codec is always on the same i2c bus

static struct i2c_board_info mxc_i2c1_board_info[] __initdata = {

/***************************************************************/

{

I2C_BOARD_INFO("tlv320aic23", 0x1a),

/****************************************************************/

Alexander

Re: Re: Re: How to enable TLV320 on IMX6Q SD

何继鑫 — Sat, 28 Feb 2015 08:19:36 GMT

Thank you ,Alexander,you are right.

I changed the file as you said,and now I can find the sound card in my dmesg.