topic how to interface dongle in sololite evk in i.MX Processors

how to interface dongle in sololite evk

thangameenaraje — Sat, 10 Jan 2015 09:59:03 GMT

hi i am working in i.mx sololite evk board.. i need to use dongle to use internet.

I am using jelly bean 4.3 from git source. using(android user guide).

i configured pid vid in drivers/usb/serial/ .

in my bootlog is showing huawei mass storage ..

but in dev/ folder i cant found ttyUSB0

kindly help me how to configure in kernel.

Re: how to interface dongle in sololite evk

igorpadykov — Sat, 10 Jan 2015 16:01:36 GMT

Hi THANGAMEENA

please look at below link where similar problem was solved

Re: Re: wifi binding on imx6sl evk based board

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: how to interface dongle in sololite evk

lyfsci — Sat, 10 Jan 2015 18:08:52 GMT

Hi Thangameena,

How you added the vid/pid in the source code itself or through sysfs entry ?

Usually dongles will be enumerated as mass storage until the driver is loaded. Once the driver is loaded then the serial AT ports will be open and well it depends on the vendor. Some dongles don't have such requirements and it could be accessed easily.

Re: how to interface dongle in sololite evk

thangameenaraje — Mon, 12 Jan 2015 06:26:52 GMT

i added vid pid in drivers/usb/serial/option.c..

i didnt find driver for my tata photon plus(huawei).