topic Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera in i.MX Processors

how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

liyu1 — Fri, 17 Oct 2014 08:55:24 GMT

Dear :

All !

my platform is:

　imx6Q

OS: android 4.2.2 jb_1.1.0

I want to open csi0(parallel camera) + csi1(parallel tvin) + mipi three camera functions in the following ways:

　static struct fsl_mxc_camera_platform_data camera_data = {

.mclk = 24000000,

.mclk_source = 0,

.csi = 0,

.io_init = mx6q_csi0_io_init,

.pwdn = mx6q_csi0_cam_powerdown,

};

static struct fsl_mxc_tvin_platform_data adv7180_data = {

.dvddio_reg = NULL,

.dvdd_reg = NULL,

.avdd_reg = NULL,

.pvdd_reg = NULL,

.pwdn = adv7180_pwdn,

.reset = adv7180_reset,

.cvbs = true,

.io_init = mx6q_csi1_io_init,

};

adv7180 driver probe is as follows:

memset(&adv7180_data, 0, sizeof(adv7180_data));

adv7180_data.sen.i2c_client = client;

adv7180_data.sen.streamcap.timeperframe.denominator = 30;

adv7180_data.sen.streamcap.timeperframe.numerator = 1;

adv7180_data.std_id = V4L2_STD_ALL;

video_idx = ADV7180_NOT_LOCKED;

adv7180_data.sen.pix.width = video_fmts[video_idx].raw_width;

adv7180_data.sen.pix.height = video_fmts[video_idx].raw_height;

adv7180_data.sen.pix.pixelformat = V4L2_PIX_FMT_UYVY; /* YUV422 */

adv7180_data.sen.pix.priv = 1; /* 1 is used to indicate TV in */

adv7180_data.sen.on = true;

adv7180_data.sen.csi = 1;

static struct fsl_mxc_camera_platform_data mipi_csi2_data = {

.mclk = 24000000,

.mclk_source = 0,

.csi = 1,

.io_init = mx6q_mipi_sensor_io_init,

.pwdn = mx6q_mipi_powerdown,

};

static struct mipi_csi2_platform_data mipi_csi2_pdata = {

.ipu_id = 0,

.csi_id = 1,

.v_channel = 0,

.lanes = 2,

.dphy_clk = "mipi_pllref_clk",

.pixel_clk = "emi_clk",

};

static struct fsl_mxc_capture_platform_data capture_data[] = {

{

.csi = 0,

.ipu = 0,

.mclk_source = 0,

.is_mipi = 0,

}, {

.csi = 1,

.ipu = 0,

.mclk_source = 0,

.is_mipi = 1,

},{

.csi = 1,

.ipu = 1,

.mclk_source = 0,

.is_mipi = 0,

};

//register

　imx6q_add_v4l2_capture(0, &capture_data[0]);

imx6q_add_v4l2_capture(1, &capture_data[1]);

imx6q_add_v4l2_capture(2, &capture_data[2]);

imx6q_add_mipi_csi2(&mipi_csi2_pdata);

ls /dev/video*

video0 video1 video16 video17 video18 video19 video2

　init.freescale.rc prop setting is as follows:

setprop back_camera_name ov5640_mipi,adv7180_decoder

setprop back_camera_orient 90

setprop front_camera_name mt9d112

setprop front_camera_orient 90

When registering using the above methods, I found mipi cameracan not be used

　Because the camera is not detected，log　is as follows:

root@android:/ # logcat |grep aHAL

I/FslCameraHAL( 2389): Face Back Camera is ov5640_mipi,adv7180_decoder, orient is 90
　

I/FslCameraHAL( 2389): Face Front Camera is mt9d112, orient is 90

I/FslCameraHAL( 2389): Checking the camera ov5640_mipi

I/FslCameraHAL( 2389): Checking the camera adv7180_decoder

I/FslCameraHAL( 2389): Get sensor adv7180_decoder's dev path /dev/video2

I/FslCameraHAL( 2389): Camera ID 0: name adv7180_decoder, Facing 0, orientation 90, dev path /dev/video2

I/FslCameraHAL( 2389): Checking the camera mt9d112

I/FslCameraHAL( 2389): Get sensor mt9d112's dev path /dev/video0

I/FslCameraHAL( 2389): Camera ID 1: name mt9d112, Facing 1, orientation 90, dev path /dev/video0

/dev/video1 is ov5640_mipi Not been detected　！

　But when I commented :

//imx6q_add_v4l2_capture(2, &capture_data[2]);

　／＊{

I2C_BOARD_INFO("adv7180", 0x21),

.platform_data = (void *)&adv7180_data,

},＊／

root@android:/ # logcat |grep aHAL

I/FslCameraHAL( 2384): Face Back Camera is ov5640_mipi,adv7180_decoder, orient is 90

I/FslCameraHAL( 2384): Face Front Camera is mt9d112, orient is 90

I/FslCameraHAL( 2384): Checking the camera ov5640_mipi

I/FslCameraHAL( 2384): Get sensor ov5640_mipi's dev path /dev/video1

I/FslCameraHAL( 2384): Camera ID 0: name ov5640_mipi, Facing 0, orientation 90, dev path /dev/video1

I/FslCameraHAL( 2384): Checking the camera mt9d112

I/FslCameraHAL( 2384): Get sensor mt9d112's dev path /dev/video0

I/FslCameraHAL( 2384): Camera ID 1: name mt9d112, Facing 1, orientation 90, dev path /dev/video0

mipi camera and mt9d112 work fine !

Please help me !

how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera in kernel ?

Abstraction layer has been completed !

I have achieved csi0 (parallel camera) + mipi + uvc　switch between three camera .

But our projects have to support csi0 (parallel camera) + csi1 (parallel tvin) + mipi csi2 three camera!

I feel android 4.2.2 mipi camera and csi1 (parallel tvin) can not be registered at the same time

Please help me !

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

igorpadykov — Fri, 17 Oct 2014 12:04:04 GMT

Hi li

probably you can look at

Some Experience When Enable MIPI Camera

"In BSP default setting, ov5640_mipi is routed to IPU0, CSI1. According to the doc, the virtual

channel in MX6x side is 1, so virtual channel 1 should be enabled in camera sensor side."

So if you connected MIPI to IPU2CSI0 , virtual channel (VC) should be 2

Figure 19-1. CSI2IPU gasket connectivity IMX6DQRM

Best regards

igor

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

liyu1 — Fri, 24 Oct 2014 04:09:46 GMT

hi igorpadykov

　　 Now , I follow your practice , but the effect is still the same
static struct mipi_csi2_platform_data mipi_csi2_pdata = {
.ipu_id = 0,
.csi_id = 1,
.v_channel = 2,
.lanes = 2,
.dphy_clk = "mipi_pllref_clk",
.pixel_clk = "emi_clk",
};

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

liyu1 — Tue, 28 Oct 2014 07:13:56 GMT

hi:

igorpadykov !

please help me !

thanks !

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

igorpadykov — Tue, 28 Oct 2014 07:31:04 GMT

Hi li

I am afraid this use case was not validated

since reference boards have not all these cameras connected.

Best regards

igor

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

liyu1 — Wed, 29 Oct 2014 07:44:27 GMT

hi igorpadykov

But we have to switch between these three,

Please help me solve this problem　！　thanks!

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

liyu1 — Wed, 29 Oct 2014 07:46:07 GMT

hi igorpadykov

I've spent a lot of time to do this thing

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

liyu1 — Wed, 29 Oct 2014 07:46:56 GMT

Why do not you help me change code, I can help you verify

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

jimmychan — Wed, 12 Nov 2014 05:58:46 GMT

According to the figure, for your case please try the VC1 (v_channel = 1) for the MIPI.

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

igorpadykov — Thu, 13 Nov 2014 10:48:25 GMT

Hi li

please look below for example with 3 cameras

Re: i.MX6Q : Parallel CSI#2 not working

Best regards

igor

Re: Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

liyu1 — Wed, 28 Jan 2015 03:56:32 GMT

Hi igorpadykov !

I follow the "Re: i.MX6Q : Parallel CSI#2 not working"　said， But still the registration is not successful　， the reason I judge: should be IPU and CSI channel selection error causes,

code :

camera 1 :mt9d112

Parallel 0 : ipu 0 csi 0

static void mx6q_csi0_io_init(void)

{

........

/* For MX6Q:

* GPR1 bit19 and bit20 meaning:

* Bit19: 0 - Enable mipi to IPU1 CSI0

* virtual channel is fixed to 0

* 1 - Enable parallel interface to IPU1 CSI0

* Bit20: 0 - Enable mipi to IPU2 CSI1

* virtual channel is fixed to 3

* 1 - Enable parallel interface to IPU2 CSI1

* IPU1 CSI1 directly connect to mipi csi2,

* virtual channel is fixed to 1

* IPU2 CSI0 directly connect to mipi csi2,

* virtual channel is fixed to 2

* For MX6DL:

* GPR13 bit 0-2 IPU_CSI0_MUX

* 000 MIPI_CSI0

* 100 IPU CSI0

if (cpu_is_mx6q())

mxc_iomux_set_gpr_register(1, 19, 1, 1);

else if (cpu_is_mx6dl())

mxc_iomux_set_gpr_register(13, 0, 3, 4);

}

static struct fsl_mxc_camera_platform_data camera_data = {

.mclk = 24000000,

.mclk_source = 0,

.ipu = 0,

.csi = 0,

.io_init = mx6q_csi0_io_init,

.pwdn = mx6q_csi0_cam_powerdown,

};

camera 2 : ov5640_mipi

mipi csi2 : ipu 0, csi1 , v_channel -> 1

static void mx6q_mipi_sensor_io_init(void)

{

......

mxc_iomux_set_gpr_register(1, 19, 1,1);

}

static struct fsl_mxc_camera_platform_data mipi_csi2_data = {

.mclk = 24000000,

.mclk_source = 0,

.ipu = 0,

.csi = 1,

.io_init = mx6q_mipi_sensor_io_init,

.pwdn = mx6q_mipi_powerdown,

};

static struct mipi_csi2_platform_data mipi_csi2_pdata = {

.ipu_id = 0,

.csi_id = 1,

.v_channel = 1,

.lanes = 2,

.dphy_clk = "mipi_pllref_clk",

.pixel_clk = "emi_clk",

};

static int ov5640_probe(struct i2c_client *client,

const struct i2c_device_id *id)

{

.......

sensor->mipi_camera =1;

......

ov5640_data.csi = plat_data->csi;

ov5640_data.ipu = plat_data->ipu;

// sensor->virtual_channel =sensor->csi | (sensor->ipu << 1);

ov5640_int_device.priv = &ov5640_data;

retval = v4l2_int_device_register(&ov5640_int_device);

............

printk("ov5640_probe ok\n");

............

}

camera3 : adv7180

Parallel 1 : ipu 1 csi 1

static void mx6q_csi1_io_init(void)

{

.........

if (cpu_is_mx6q()){

//printk("==== mx6q_csi1_io_init cpu_is_mx6q ====\n");

mxc_iomux_set_gpr_register(1, 20, 1, 1);

}else if (cpu_is_mx6dl()){

//printk("==== mx6q_csi1_io_init cpu_is_mx6dl ====\n");

mxc_iomux_set_gpr_register(13, 0, 3, 4);

}

static struct fsl_mxc_tvin_platform_data adv7180_data = {

//.dvddio_reg = NULL,

//.dvdd_reg = NULL,

//.avdd_reg = NULL,

//.pvdd_reg = NULL,

.pwdn = adv7180_pwdn,

.reset = adv7180_reset,

.cvbs = true,

.ipu = 1,

.csi = 1,

.io_init = mx6q_csi1_io_init,

};

static int adv7180_probe(struct i2c_client *client,

const struct i2c_device_id *id)

{

int rev_id;

int ret = 0;

.........

adv7180_data.sen.csi = 1;//tvin_plat->csi;

adv7180_data.sen.ipu = 1;

//adv7180_data.sen.mclk = 28000000;

............

/* This function attaches this structure to the /dev/video0 device.

* The pointer in priv points to the mt9v111_data structure here.*/

adv7180_int_device.priv = &adv7180_data;

ret = v4l2_int_device_register(&adv7180_int_device);

return ret;

}

imx6q_add_v4l2_capture(0, &capture_data[0]);

imx6q_add_v4l2_capture(1, &capture_data[1]);

imx6q_add_v4l2_capture(2, &capture_data[2]);

imx6q_add_mipi_csi2(&mipi_csi2_pdata);

But cant't find ov5640_mipi

logcat |grep HAL

I/FslCameraHAL( 2395): Face Back Camera is ov5640_mipi,adv7180_decoder,uvc, orient is 90

I/FslCameraHAL( 2395): Face Front Camera is mt9d112, orient is 90

I/FslCameraHAL( 2395): Checking the camera ov5640_mipi

I/FslCameraHAL( 2395): Checking the camera adv7180_decoder

I/FslCameraHAL( 2395): Get sensor adv7180_decoder's dev path /dev/video2

I/FslCameraHAL( 2395): Camera ID 0: name adv7180_decoder, Facing 0, orientation 90, dev path /dev/video2

I/FslCameraHAL( 2395): Checking the camera mt9d112

I/FslCameraHAL( 2395): Get sensor mt9d112's dev path /dev/video0

I/FslCameraHAL( 2395): Camera ID 1: name mt9d112, Facing 1, orientation 90, dev path /dev/video0

I/SWITCHPROFILE( 2705): Switchprofile thread received GOV_INTERACTIVE from Power HAL

These two cameras can be captured images.

But I modify the code to

static int adv7180_probe(struct i2c_client *client,

const struct i2c_device_id *id)

{

int rev_id;

int ret = 0;

.........

// adv7180_data.sen.csi = 1;//tvin_plat->csi;

// adv7180_data.sen.ipu = 1;

............

/* This function attaches this structure to the /dev/video0 device.

* The pointer in priv points to the mt9v111_data structure here.*/

adv7180_int_device.priv = &adv7180_data;

ret = v4l2_int_device_register(&adv7180_int_device);

return ret;

}

root@android:/ # logcat |grep HAL

I/FslCameraHAL( 2395): Face Back Camera is ov5640_mipi,adv7180_decoder,uvc, orient is 90

I/FslCameraHAL( 2395): Face Front Camera is mt9d112, orient is 90

I/FslCameraHAL( 2395): Checking the camera ov5640_mipi

I/SWITCHPROFILE( 2705): Switchprofile thread received GOV_INTERACTIVE from Power HAL

I/FslCameraHAL( 2395): Get sensor ov5640_mipi's dev path /dev/video2

I/FslCameraHAL( 2395): Camera ID 0: name ov5640_mipi, Facing 0, orientation 90, dev path /dev/video2

I/FslCameraHAL( 2395): Checking the camera mt9d112

It can find ov5640_mipi ．

Not only can not find the　other two cameras　，Ｂｕｔov5640 can't get image !

I just comment out ：

// adv7180_data.sen.csi = 1;//tvin_plat->csi;

// adv7180_data.sen.ipu = 1;

Therefore I judge registration is not successful reason, is because the IPU and CSI channel selection error．

But how to modify the code　　！

　　　Thanks !

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

liyu1 — Wed, 28 Jan 2015 05:47:03 GMT

Hi jimmychan:

How to use the virtual channel 1　？

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

liyu1 — Thu, 29 Jan 2015 02:11:53 GMT

问题我已经解决了，谢谢！

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

liyu1 — Thu, 29 Jan 2015 04:13:23 GMT

我已经实现四个摄像头之间切换！ mt9d112 ov5640_mipi adv7180 uvc

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

mayqueen — Fri, 20 Mar 2015 07:51:02 GMT

請問可以教我嗎?我只有單一個ov5640 mipi camera卻無法通到上層，我使用的是Android 4.4.2，

卡很久了，IPU與CSI之間的關係大概清楚，但怎麼改都一樣HAL層沒偵測到，請問是哪邊需要改呢。

謝謝我有skype與QQ 再麻煩您了!

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

luciuslu — Tue, 04 Apr 2017 00:56:57 GMT

你就是一个自私的lase，出问题的时候求爷爷告奶奶!恨不得所有人帮助你，解决问题后，从不分享!自私的东西。

Re: how to let kernel(3.0.35) support csi0(parallel camera) + csi1(parallel tvin) +mipi csi2 three camera

mayqueen — Fri, 14 Apr 2017 08:22:31 GMT

你怎麼知道我有解決？兩年前我最後沒解掉阿...還因此被革職了,脾氣好一點,問題可以更容易解決謝謝