About LPDDR2 Script Aid Options

tony_l_cai — Thu, 08 Jan 2015 07:41:29 GMT

Hi, All

in LPDDR2 Script Aid,how can I fill in these blanks? some configuration options below:

PCB Parameters
DRAM DSE Setting - DQ/DQM (ohm)	40
DRAM DSE Setting - CA/CTL (ohm)	40
DRAM DSE Setting - CK (ohm)	48
DRAM DSE Setting - DQS (ohm)	40

And I have read the user guide for DDR3, but in this guide, no more details about these parms,just " SI design experience or simulation result ",please give me more info , thanks!

Re: About LPDDR2 Script Aid Options

Yuri — Thu, 08 Jan 2015 08:37:28 GMT

You may try to adjust drive strength settings experimentally, using different
options and memory test. Also, You may look at waveforms of the corresponding
signals, if they do not have voltage over-/under-shoots.

Have a great day,
Yuri

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

i.MX ProcessorsのトピックAbout LPDDR2 Script Aid Options

About LPDDR2 Script Aid Options

Re: About LPDDR2 Script Aid Options