How booting Android on imx6

alexandredel — Thu, 24 Jul 2014 14:17:40 GMT

Hello, sorry for my english, it's not my mother tongue.

I have a sabrelite and i'm trying to put android on it.

I used the linaro image of android : Linaro Releases but when i put it on a sd card and i plug it in the sabrelite, here is what happened:

## Booting kernel from Legacy Image at 10000000 ...

Image Name: Linux-3.2.0+

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 3862688 Bytes = 3.7 MiB

Load Address: 10008000

Entry Point: 10008000

Verifying Checksum ... OK

## Loading init Ramdisk from Legacy Image at 12000000 ...

Image Name: Android Ramdisk Image

Image Type: ARM Linux RAMDisk Image (gzip compressed)

Data Size: 196567 Bytes = 192 KiB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

## Flattened Device Tree blob at 11ff0000

Booting using the fdt blob at 0x11ff0000

Loading Kernel Image ... OK

Using Device Tree in place at 11ff0000, end 11ff6b93

Starting kernel ...

<6>Booting Linux on physical CPU 0

<6>Initializing cgroup subsys cpuset

<5>Linux version 3.2.0+ (jenkins-build@ip-10-224-54-183) (gcc version 4.6.3 (Linaro GCC 4.6-2012.03) ) #1 SMP PREEMPT Mon Mar 26 15:12:12 UTC 2012

CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

<6>Machine: Freescale i.MX6 Quad (Device Tree), model: Freescale i.MX6 Quad SABRE Lite Board

[ 0.000000] Booting Linux on physical CPU 0

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Linux version 3.2.0+ (jenkins-build@ip-10-224-54-183) (gcc version 4.6.3 (Linaro GCC 4.6-2012.03) ) #1 SMP PREEMPT Mon Mar 26 15:12:12 UTC 2012

[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d

[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[ 0.000000] Machine: Freescale i.MX6 Quad (Device Tree), model: Freescale i.MX6 Quad SABRE Lite Board

<6>bootconsole [earlycon0] enabled

[ 0.000000] bootconsole [earlycon0] enabled

Memory policy: ECC disabled, Data cache writealloc

[ 0.000000] Memory policy: ECC disabled, Data cache writealloc

<7>On node 0 totalpages: 229376

<7>free_area_init_node: node 0, pgdat c0803820, node_mem_map c0987000

<7> Normal zone: 1584 pages used for memmap

<7> Normal zone: 0 pages reserved

<7> Normal zone: 178640 pages, LIFO batch:31

<7> HighMem zone: 720 pages used for memmap

<7> HighMem zone: 48432 pages, LIFO batch:15

<6>PERCPU: Embedded 8 pages/cpu @c1296000 s10688 r8192 d13888 u32768

[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1296000 s10688 r8192 d13888 u32768

<7>pcpu-alloc: s10688 r8192 d13888 u32768 alloc=8*4096

<7>pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227072

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227072

<5>Kernel command line: console=ttymxc0,115200n8 rootwait ro earlyprintk rootdelay=1 fixrtc nocompcache di1_primary tve init=/init androidboot.console=ttymxc0

[ 0.000000] Kernel command line: console=ttymxc0,115200n8 rootwait ro earlyprintk rootdelay=1 fixrtc nocompcache di1_primary tve init=/init androidboot.console=ttymxc0

<6>PID hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>Memory:[ 0.000000] Memory: 896MB 896MB = 896MB total

= 896MB total

<5>Memory: 897324k/897324k available, 151252k reserved, 196608K highmem

[ 0.000000] Memory: 897324k/897324k available, 151252k reserved, 196608K highmem

<5>Virtual kernel memory layout:

vector : 0xffff0000 - 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

vmalloc : 0xec800000 - 0xf4000000 ( 120 MB)

lowmem : 0xc0000000 - 0xec000000 ( 704 MB)

pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

.text : 0xc0008000 - 0xc077027c (7585 kB)

.init : 0xc0771000 - 0xc07ba9c0 ( 295 kB)

.data : 0xc07bc000 - 0xc0805f70 ( 296 kB)

.bss : 0xc0805f94 - 0xc0986770 (1538 kB)

[ 0.000000] Virtual kernel memory layout:

[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

[ 0.000000] vmalloc : 0xec800000 - 0xf4000000 ( 120 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB)

[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

[ 0.000000] .text : 0xc0008000 - 0xc077027c (7585 kB)

[ 0.000000] .init : 0xc0771000 - 0xc07ba9c0 ( 295 kB)

[ 0.000000] .data : 0xc07bc000 - 0xc0805f70 ( 296 kB)

[ 0.000000] .bss : 0xc0805f94 - 0xc0986770 (1538 kB)

<6>Preemptible hierarchical RCU implementation.

[ 0.000000] Preemptible hierarchical RCU implementation.

<6>NR_IRQS:432

[ 0.000000] NR_IRQS:432

<6>L310 cache controller enabled

[ 0.000000] L310 cache controller enabled

<6>l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B

[ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B

<6>sched_clock: 32 bits at 8MHz, resolution 121ns, wraps every 520602ms

[ 0.000000] sched_clock: 32 bits at 8MHz, resolution 121ns, wraps every 520602ms

<6>Console: colour dummy device 80x30

[ 0.000000] Console: colour dummy device 80x30

<3>ram_console: buffer (null), invalid size 0, datasize 4294967284

[ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284

<6>Calibrating delay loop... [ 0.024213] Calibrating delay loop... <c>1581.05 BogoMIPS (lpj=7905280)

1581.05 BogoMIPS (lpj=7905280)

<6>pid_max: default: 32768 minimum: 301

[ 0.121267] pid_max: default: 32768 minimum: 301

<6>Mount-cache hash table entries: 512

[ 0.129883] Mount-cache hash table entries: 512

<6>CPU: Testing write buffer coherency: [ 0.143930] CPU: Testing write buffer coherency: ok

<6>ftrace: allocating 20020 entries in 59 pages

[ 0.153618] ftrace: allocating 20020 entries in 59 pages

<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[ 0.192282] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

<6>Calibrating local timer... [ 0.200779] Calibrating local timer... 396.19MHz.

396.19MHz.

<6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available

[ 0.267415] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available

CPU1: Booted secondary processor

<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

CPU2: Booted secondary processor

<6>CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

CPU3: Booted secondary processor

<6>CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

<6>Brought up 4 CPUs

[ 0.373827] CPU1: Booted secondary processor

[ 0.415037] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[ 0.453856] CPU2: Booted secondary processor

[ 0.495074] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

[ 0.533891] CPU3: Booted secondary processor

[ 0.575112] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

[ 0.577094] Brought up 4 CPUs

<6>SMP: Total of 4 processors activated (6324.22 BogoMIPS).

[ 0.615823] SMP: Total of 4 processors activated (6324.22 BogoMIPS).

<6>devtmpfs: initialized

[ 0.625689] devtmpfs: initialized

<6>print_constraints: dummy:

[ 0.638646] print_constraints: dummy:

<6>NET: Registered protocol family 16

[ 0.646364] NET: Registered protocol family 16

<7>gpiochip_find_base: found new base at 224

<7>gpiochip_find_base: found new base at 192

<7>gpiochip_find_base: found new base at 160

<7>gpiochip_find_base: found new base at 128

<7>gpiochip_find_base: found new base at 96

<7>gpiochip_find_base: found new base at 64

<7>gpiochip_find_base: found new base at 32

<4>audmux_v2 21d8000.audmux: audmux_v2_probe: cannot get clock: 0

[ 0.705089] audmux_v2 21d8000.audmux: audmux_v2_probe: cannot get clock: 0

<6>cpaddr = ec880000 suspend_iram_base=ec826000

[ 0.723355] cpaddr = ec880000 suspend_iram_base=ec826000

<6>No ATAGs?[ 0.729874] No ATAGs?<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

[ 0.738989] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

<6>hw-breakpoint: maximum watchpoint size is 4 bytes.

[ 0.752183] hw-breakpoint: maximum watchpoint size is 4 bytes.

<6>bio: create slab <bio-0> at 0

[ 0.789841] bio: create slab <bio-0> at 0

<5>SCSI subsystem initialized

[ 0.799597] SCSI subsystem initialized

<7>libata version 3.00 loaded.

<6>usbcore: registered new interface driver usbfs

[ 0.812355] usbcore: registered new interface driver usbfs

<6>usbcore: registered new interface driver hub

[ 0.822626] usbcore: registered new interface driver hub

<6>usbcore: registered new device driver usb

[ 0.832350] usbcore: registered new device driver usb

<6>imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)

[ 0.871857] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)

<6>imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)

[ 0.901866] imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)

<6>Advanced Linux Sound Architecture Driver Version 1.0.24.

[ 0.915767] Advanced Linux Sound Architecture Driver Version 1.0.24.

<6>Switching to clocksource mxc_timer1

[ 0.927175] Switching to clocksource mxc_timer1

<6>NET: Registered protocol family 2

[ 0.982644] NET: Registered protocol family 2

<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.993483] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 1.007805] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

<6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

[ 1.022839] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

<6>TCP: Hash tables configured (established 131072 bind 65536)

[ 1.036247] TCP: Hash tables configured (established 131072 bind 65536)

<6>TCP reno registered

[ 1.045081] TCP reno registered

<6>UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 1.053207] UDP hash table entries: 512 (order: 2, 16384 bytes)

<6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 1.064588] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

<6>NET: Registered protocol family 1

[ 1.074731] NET: Registered protocol family 1

<6>RPC: Registered named UNIX socket transport module.

[ 1.084603] RPC: Registered named UNIX socket transport module.

<6>RPC: Registered udp transport module.

[ 1.094330] RPC: Registered udp transport module.

<6>RPC: Registered tcp transport module.

[ 1.102820] RPC: Registered tcp transport module.

<6>RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 1.113045] RPC: Registered tcp NFSv4.1 backchannel transport module.

<6>Trying to unpack rootfs image as initramfs...

[ 1.124219] Trying to unpack rootfs image as initramfs...

<6>Freeing initrd memory: 192K

[ 1.146718] Freeing initrd memory: 192K

<6>i.MXC CPU frequency driver

[ 1.154043] i.MXC CPU frequency driver

<6>audit: initializing netlink socket (disabled)

[ 1.163002] audit: initializing netlink socket (disabled)

<5>type=2000 audit(1.080:1): initialized

[ 1.172229] type=2000 audit(1.080:1): initialized

highmem bounce pool size: 64 pages

[ 1.196554] highmem bounce pool size: 64 pages

<6>ashmem: initialized

[ 1.203711] ashmem: initialized

<6>Btrfs loaded

[ 1.211343] Btrfs loaded

<6>msgmni has been set to 1368

[ 1.216810] msgmni has been set to 1368

<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[ 1.228313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

<6>io scheduler noop registered

[ 1.238723] io scheduler noop registered

<6>io scheduler deadline registered

[ 1.245987] io scheduler deadline registered

<6>io scheduler cfq registered (default)

[ 1.254129] io scheduler cfq registered (default)

<6>mxc_sdc_fb 0.fb: register mxc display driver ldb

[ 1.266959] mxc_sdc_fb 0.fb: register mxc display driver ldb

<3>_regulator_get: get() with no identifier

[ 1.276703] _regulator_get: get() with no identifier

<4>imx-ipuv3 imx-ipuv3.1: Channel already disabled 9

<4>imx-ipuv3 imx-ipuv3.1: Channel already uninitialized 9

<6>imx-ipuv3 imx-ipuv3.1: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)

[ 1.286616] imx-ipuv3 imx-ipuv3.1: Channel already disabled 9

[ 1.291772] imx-ipuv3 imx-ipuv3.1: Channel already uninitialized 9

[ 1.319019] imx-ipuv3 imx-ipuv3.1: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)

<6>Console: switching to colour frame buffer device 128x48

[ 1.370801] Console: switching to colour frame buffer device 128x48

<4>imx-ipuv3 imx-ipuv3.1: Channel already disabled 10

<4>imx-ipuv3 imx-ipuv3.1: Channel already uninitialized 10

[ 1.392232] imx-ipuv3 imx-ipuv3.1: Channel already disabled 10

[ 1.397507] imx-ipuv3 imx-ipuv3.1: Channel already uninitialized 10

<6>mxc_sdc_fb 1.fb: register mxc display driver hdmi

[ 1.418108] mxc_sdc_fb 1.fb: register mxc display driver hdmi

<6>mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1

[ 1.429845] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1

<4>imx-ipuv3 imx-ipuv3.0: Channel already disabled 9

<4>imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9

[ 1.441649] imx-ipuv3 imx-ipuv3.0: Channel already disabled 9

[ 1.446802] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9

<4>imx-ipuv3 imx-ipuv3.0: Channel already disabled 10

<4>imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 10

[ 1.479399] imx-ipuv3 imx-ipuv3.0: Channel already disabled 10

[ 1.484641] imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 10

<6>imx-sdma 20ec000.sdma: loaded firmware 1.1

im 1.505172] imx-sdma 20ec000.sdma: loaded firmware 1<6.>1

x-sdma 20ec000.sdma: initialized

[ 1.51380<36>] Seirmxia-sl:dm aIM 2X 0decr0iv00er.

ar: <i6>ni21tiea8l00i0ze.ud sd

t: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX

[ 1.518779] Serial: IMX driver

[ 1.525914] 21e8000.uart: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX

<6>imx-ocotp 21bc000.ocotp: initialized

[ 1.737889] imx-ocotp 21bc000.ocotp: initialized

<6>brd: module loaded

[ 1.759595] brd: module loaded

<6>loop: module loaded

[ 1.772777] loop: module loaded

<6>No sata disk, enter into PDDQ mode.

[ 2.383903] No sata disk, enter into PDDQ mode.

<4>m25p80 spi32766.0: found sst25vf016b, expected m25p32

[ 2.397293] m25p80 spi32766.0: found sst25vf016b, expected m25p32

<6>m25p80 spi32766.0: sst25vf016b (2048 Kbytes)

[ 2.407906] m25p80 spi32766.0: sst25vf016b (2048 Kbytes)

<6>spi_imx 2008000.ecspi: probed

[ 2.417477] spi_imx 2008000.ecspi: probed

<6>FEC Ethernet Driver

[ 2.425176] FEC Ethernet Driver

<6>fec_enet_mii_bus: probed

[ 2.448304] fec_enet_mii_bus: probed

<6>usbcore: registered new interface driver asix

[ 2.457828] usbcore: registered new interface driver asix

<6>usbcore: registered new interface driver cdc_ether

[ 2.468362] usbcore: registered new interface driver cdc_ether

<6>usbcore: registered new interface driver smsc95xx

[ 2.479330] usbcore: registered new interface driver smsc95xx

<6>usbcore: registered new interface driver net1080

[ 2.490033] usbcore: registered new interface driver net1080

<6>usbcore: registered new interface driver cdc_subset

[ 2.500920] usbcore: registered new interface driver cdc_subset

<6>usbcore: registered new interface driver zaurus

[ 2.511699] usbcore: registered new interface driver zaurus

<6>cdc_ncm: 04-Aug-2011

[ 2.519622] cdc_ncm: 04-Aug-2011

<6>usbcore: registered new interface driver cdc_ncm

[ 2.527795] usbcore: registered new interface driver cdc_ncm

<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 2.539631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<7>ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96

<6>mxc-ehci ehci-mxc.0: initializing i.MX USB Controller

[ 2.556396] mxc-ehci ehci-mxc.0: initializing i.MX USB Controller

<6>mxc-ehci ehci-mxc.0: Freescale On-Chip EHCI Host Controller

[ 2.597475] mxc-ehci ehci-mxc.0: Freescale On-Chip EHCI Host Controller

<6>mxc-ehci ehci-mxc.0: new USB bus registered, assigned bus number 1

[ 2.610824] mxc-ehci ehci-mxc.0: new USB bus registered, assigned bus number 1

<7>mxc-ehci ehci-mxc.0: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1

<7>mxc-ehci ehci-mxc.0: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park

<7>mxc-ehci ehci-mxc.0: park 0

<7>mxc-ehci ehci-mxc.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT

<7>mxc-ehci ehci-mxc.0: ...powerdown ports...

<6>mxc-ehci ehci-mxc.0: irq 75, io mem 0x02184000

[ 2.676370] mxc-ehci ehci-mxc.0: irq 75, io mem 0x02184000

<7>mxc-ehci ehci-mxc.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN

<6>mxc-ehci ehci-mxc.0: USB 2.0 started, EHCI 1.00

[ 2.706447] mxc-ehci ehci-mxc.0: USB 2.0 started, EHCI 1.00

<7>usb usb1: default language 0x0409

<7>usb usb1: udev 1, busnum 1, minor = 0

<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 2.725048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.738161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

<6>usb usb1: Product: Freescale On-Chip EHCI Host Controller

[< 6 > us 2b. u75sb0191: 5]Ma unsufb acutsbur1:er P:r Lodinuuctx : 3.Fr2e.0es+ cealhce i_Onh-cdCh

ip< 6>EHuCsbI uHsosb1t : CSonetrriaolllNuermb

: ehci-mxc.0

[ 2.7<759>u6s33b ] uussb1b: u usbs1b:_ prMaobneuf_dacetvuicreer

: <7L>inuusbx 3us.2b.10: +c eonhcfii_guhrcdat

n[ #1 2ch.7o6s5en2 02fr] oums 1b uchsbo1i:ce

r<i7>aulNsbum buesbr1: : ehacddi-inmgxc 1.0-0 Se

1.0 (config #1, interface 0)

<7>hub 1-0:1.0: usb_probe_interface

<7>hub 1-0:1.0: usb_probe_interface - got id

<6>hub 1-0:1.0: USB hub found

[ 2.797478] hub 1-0:1.0: USB hub found

<6>hub 1-0:1.0: 1 port detected

[ 2.804223] hub 1-0:1.0: 1 port detected

<7>hub 1-0:1.0: standalone hub

<7>hub 1-0:1.0: individual port power switching

<7>hub 1-0:1.0: individual port over-current protection

<7>hub 1-0:1.0: Single TT

<7>hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)

<7>hub 1-0:1.0: power on to power good time: 20ms

<7>hub 1-0:1.0: local power source is good

<7>hub 1-0:1.0: enabling power on all ports

<6>mxc-ehci ehci-mxc.1: initializing i.MX USB Controller

[ 2.846019] mxc-ehci ehci-mxc.1: initializing i.MX USB Controller

<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000

<6>mxc-ehci ehci-mxc.1: Freescale On-Chip EHCI Host Controller

[ <62.>m94xc74-e89h]c i mexchc-eih-cmxic e.1hc:i n-mexwc U.S1:B Fbrues erscegalies teOrn-edCh,i pas sEHigCIn eHd obstus C onnumtbroerll e2r

7>mxc-ehci ehci-mxc.1: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1

[< 7 >m x2c-.9eh6c02i 11e]h cim-xcmx-ech.c1:i erhesciet- mxhcc.c_1:p arneamws U 0SB00 b6u ts hrreegshis 0te rufedra,m aesss 2ig5n6/ed51 2bu/1s 02nu4m pbearrk 2

<7>mxc-ehci ehci-mxc.1: park 0

<7>mxc-ehci ehci-mxc.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT

<7>mxc-ehci ehci-mxc.1: ...powerdown ports...

<6>mxc-ehci ehci-mxc.1: irq 72, io mem 0x02184200

[ 3.026389] mxc-ehci ehci-mxc.1: irq 72, io mem 0x02184200

<7>mxc-ehci ehci-mxc.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN

<6>mxc-ehci ehci-mxc.1: USB 2.0 started, EHCI 1.00

[ 3.056451] mxc-ehci ehci-mxc.1: USB 2.0 started, EHCI 1.00

<7>usb usb2: default language 0x0409

<7>usb usb2: udev 1, busnum 2, minor = 128

<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[ 3.075205] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 3.088306] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

<6>usb usb2: Product: Freescale On-Chip EHCI Host Controller

[ 3.101053] usb usb2: Product: Freescale On-Chip EHCI Host Controller

<6>usb usb2: Manufacturer: Linux 3.2.0+ ehci_hcd

[ 3.111971] usb usb2: Manufacturer: Linux 3.2.0+ ehci_hcd

<6>usb usb2: SerialNumber: ehci-mxc.1

[ 3.120885] usb usb2: SerialNumber: ehci-mxc.1

<7>usb usb2: usb_probe_device

<7>usb usb2: configuration #1 chosen from 1 choice

<7>usb usb2: adding 2-0:1.0 (config #1, interface 0)

<7>hub 2-0:1.0: usb_probe_interface

<7>hub 2-0:1.0: usb_probe_interface - got id

<6>hub 2-0:1.0: USB hub found

[ 3.148438] hub 2-0:1.0: USB hub found

<6>hub 2-0:1.0: 1 port detected

[ 3.155197] hub 2-0:1.0: 1 port detected

<7>hub 2-0:1.0: standalone hub

<7>hub 2-0:1.0: individual port power switching

<7>hub 2-0:1.0: individual port over-current protection

<7>hub 2-0:1.0: Single TT

<7>hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)

<7>hub 2-0:1.0: power on to power good time: 20ms

<7>hub 2-0:1.0: local power source is good

<7>hub 2-0:1.0: enabling power on all ports

<6>usbcore: registered new interface driver cdc_wdm

[ 3.197053] usbcore: registered new interface driver cdc_wdm

<6>Initializing USB Mass Storage driver...

[ 3.206675] Initializing USB Mass Storage driver...

<6>usbcore: registered new interface driver usb-storage

[ 3.216956] usbcore: registered new interface driver usb-storage

<6>USB Mass Storage support registered.

[ 3.226669] USB Mass Storage support registered.

<6>usbcore: registered new interface driver libusual

[ 3.236378] usbcore: registered new interface driver libusual

<6>usbcore: registered new interface driver usbtest

[ 3.247118] usbcore: registered new interface driver usbtest

<3>egalax_ts 2-0004: egalax_ts: failed to read firmware version

[ 3.259045] egalax_ts 2-0004: egalax_ts: failed to read firmware version

<4>egalax_ts: probe of 2-0004 failed with error -5

[ 3.270419] egalax_ts: probe of 2-0004 failed with error -5

<6>using rtc device, 20cc000.snvs, for alarms[ 3.282836] using rtc device, 20cc000.snvs, for alarms<7>mxc-ehci ehci-mxc.1: GetStatus port:1 status 10001803 8 ACK POWER sig=j CSC CONNECT

<7>hub 2-0:1.0: port 1: status 0101 change 0001

<6>snvs_rtc 20cc000.snvs: rtc core: registered 20cc000.snvs as rtc0

[ 3.306304] snvs_rtc 20cc000.snvs: rtc core: registered 20cc000.snvs as rtc0

<6>i2c /dev entries driver

[ 3.316263] i2c /dev entries driver

<6>Linux video capture interface: v2.00

[ 3.324699] Linux video capture interface: v2.00

<6>mxc_v4l2_output v4l2-out.5: V4L2 device registered as video16

[ 3.335977] mxc_v4l2_output v4l2-out.5: V4L2 device registered as video16

<6>mxc_v4l2_output v4l2-out.5: V4L2 device registered as video17

[ 3.348997] mxc_v4l2_output v4l2-out.5: V4L2 device registered as video17

<6>mxc_v4l2_output v4l2-out.5: V4L2 device registered as video18

[ 3.362039] mxc_v4l2_output v4l2-out.5: V4L2 device registered as video18

<6>mxc_v4l2_output v4l2-out.5: V4L2 device registered as video19

[ 3.375065] mxc_v4l2_output v4l2-out.5: V4L2 device registered as video19

<6>Driver for 1-wire Dallas network protocol.

[ 3.386291] Driver for 1-wire Dallas network protocol.

<7>hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000

<6>imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)

[ 3.403557] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)

<7>hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s

<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com

[ 3.425024] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com

<4>clk_reg_cpufreq: regulator cpu get failed.

[ 3.437728] clk_reg_cpufreq: regulator cpu get failed.

<6>cpuidle: using governor ladder

[ 3.446402] cpuidle: using governor ladder

<6>cpuidle: using governor menu

[ 3.453480] cpuidle: using governor menu

<6>sdhci: Secure Digital Host Controller Interface driver

[ 3.463316] sdhci: Secure Digital Host Controller Interface driver

<6>sdhci: Copyright(c) Pierre Ossman

<7>mxc-ehci ehci-mxc.1: port 1 high speed

[< 7 >m xc3-.4eh72c9i3 e6h] cisd-hmcxci.: 1:Co pGyetrSigtahtt(usc) poPirte:rr1 e stOsastumas n1

01205 12 ACK POWER sig=se0 LPM PE CONNECT

<6>sdhci-pltfm: SDHCI platform and OF driver helper

[ 3.494072] sdhci-pltfm: SDHCI platform and OF driver helper

<7>mxc: set GPIO 32 to high trigger

<4>sdhci-esdhc-imx 2198000.usdhc: vmmc-supply property in node /soc/aips-bus@02100000/usdhc@02198000 references invalid phandle[ 3.514655] sdhci-esdhc-imx 2198000.usdhc: vmmc-supply property in node /sd

[ 3.529767] mmc0: no vmmc regulator found

<7>Registered led device: mmc0::

<6>mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using DMA

<6>usb 2-1: new high-speed USB device number 2 using mxc-ehci

<7>mxc: set GPIO 198 to high trigger

[ < 4 >s 3dh.c54i-48e6s1dh]c m-imcm0x: 2 1SD9cHC0I0 0.cuonsdtrhocl: lvermm ocn- su2p19pl80y0 0p.rouspedrhcty [ 2i1n 9n80od00e. u/ssodhc/c]a iupss-inbug sD@M02A1

0[ 0 0/ u 3sd.5h5c0@0326919] cu0s00b 2re-1f:er neencw esh iginh-vaspleided p hUSanB dldeev<6i>cem mnc1u:mb nero 2vm musc inrge gumlxcat-eohrc fio

[ <73.>5Re75gi9s00te] resddh lcied- esdedhvic-cie:mx m m21c19c::00

.usdhc: vmmc-sup<6p>lym mcpr1:o peSDrtHCy Ii cn onntodroe ll/seor c/ona ip21s-9cbu0s00@0.u2s10dh00c 00[/21us9cd0hc00@0.u21s9dhc0c]0 0 usreinfegr DenMAc

invalid phandl<e6> es

U[ in i 3ti.5al81i5ze55d

immc1: no <7vm>Rmceg riesgteurlaedto rl edf oudendv

: Heartbeat

[ 3.601322] mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] usin<g6 >uDsMAbc

ve[ : r e3gi.s6t06er0e21d ] neVPwU i intneitrfiaacliez dedri

er usbhid

[<6 >u s3bh.6id2:66 U60SB] uHIsbD ccorore:e rderigivesrt

6d new inte<6r>faloceg gderri: vcerre uatsbehd id25 er

K log 'log_main'

[ <6 >3l.6og32ge24r6: ] cruesbathiedd : 2U5S6KB HloIDg c'looreg_ dervienvters'

[ <36.>l6o38gg59e8r]: cloreggaetred: c25re6aKt leod g 25'6lKo g_lrogad 'iolo'g

6>ain'<

logger: created 256K log 'log_system'

[ 3.646185] logger: created 256K log 'log_events'

3>[ sg t l53.006053 067-06]0 0alo: gFgeair:le cdr teao tgedet 2 s56uKpp llyo g 'V'lDDogA_':ra -d1io9

[ <6 >3p.ri6n58t_02c6o]ns tloraggienrts:: c 0re-a0t00ead : 25865K0 <lo--g >' l16o0g_0 symsVt aetm' 1

0 mV normal

[ < 3> sg3t.6l572000502 0] -0s0gt0al5: 00F0ai 0le-d00 t0ao : gFetai sluedpp tlyo g'VetDD Asu':pp -ly1 9'

l5A'<:3> -sg1t9 V

00[ 0 0- 03.0068a:28 4Fa7]il eprd intot_ creonqusetrstai sntuspp: li0e-0s:00 -a:1 98

0< 3><s--gt> l51600000 0m-V 00at0a 1:2 a00so cmV: nfaorimleald t 5

probe CODEC sgtl5000.0-000a: -19

[ < 3 >a 3s.oc6:92 f34ai9]l edsg ttol5 i00ns0 t0an-0ti0a0ate: cFaairdle sdg ttlo 50ge0t0- sauudppioly: '-V19DD

A': -19

6>[A LS A3 d.7ev0i18ce33 l] isstgt:

50<600> 0 N-0o0 s0aou:n Fdcaiarledds tfoou rndeq.

lt suppl<6ie>so:pr o-f19i ue

[ us in 3g. a71rm1/05ar4]mv s7g-ctla95

0 0-000a: asoc: failed to probe CODEC sgtl5000.0-000a: -19

[ 3.721077] asoc: failed to instantiate card sgtl5000-audio: -19

[ 3.725514] ALSA device list:

[ 3.73<602>T12C]P cu bNoic s rouengidcstaerdres d

nin6>dI. fo

ti[a li z3in.7g 3X67FR37M ] noetprlionfik leso: cukseit

g arm/armv7-ca9 n

[ 3.756271] TCP cubic registered

[ 3.762709] Initializing XFRM netlink socket

<6>NET: Registered protocol family 10

[ 3.870585] NET: Registered protocol family 10

<6>IPv6 over IPv4 tunneling driver

[ 3.879352] IPv6 over IPv4 tunneling driver

<6>NET: Registered protocol family 17

[ 3.888207] NET: Registered protocol family 17

<6>NET: Registered protocol family 15

[ 3.896213] NET: Registered protocol family 15

<5>Registering the dns_resolver key type

[ 3.904466] Registering the dns_resolver key type

<6>VFP support v0.3: [ 3.911166] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

uplementor 41 architecture 3 part 30 varia<n7>tu 9sb r 2ev- 1:4

dev 2, busnum 2, minor = 129

<6>ThumbEE CPU extension supported.

<6>usb 2-1: New USB device found, idVendor=0424, idProduct=2513

[< 6> u sb3. 299-21:77 N9e] w ThUSumBb EdEev CicPeU sextrteinngsis:o n Mfsur=pp0o, rtPreod.du

=[ 0, Se3.ri99a8lN45um8b] erus=0b

-1: New <7U>SBus dbe v2-i1ce: fuosub_npd,ro ibdeV_deendviorc=e0

ur<74,>u isbdP r2-od1:u ctco=2nf51ig3

ation #1 chosen from 1 choice

[ <7 >4us.0b 1206-156: ] auddsbin g2- 21:-1 N:e1.w 0 U(SBco dnfeviig ce#1 ,st irintngesrf: acMefr 0=0)

obod<u7>cth=u0b ,2 S-1er:i1a.0l:Nu umbsebr_p=r0 ,

e_interface

<7>hub 2-1:1.0: usb_probe_interface - got id

<5>Registering SWP/SWPB emulation handler

[< 6> tu r4.n 04of55f9 b9]oo tRe cgionstseolrie neg arSWlyP/cSonWP0

emulation handler B

[ 4.051882] turn off boot console earlycon0

<6>hub 2-1:1.0: USB hub found

<6>hub 2-1:1.0: 3 ports detected

<7>hub 2-1:1.0: standalone hub

<7>hub 2-1:1.0: individual port power switching

<7>hub 2-1:1.0: individual port over-current protection

<7>hub 2-1:1.0: TT per port

<7>hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)

<7>hub 2-1:1.0: power on to power good time: 100ms

<7>hub 2-1:1.0: local power source is good

<7>hub 2-1:1.0: enabling power on all ports

<6>snvs_rtc 20cc000.snvs: setting system clock to 1970-01-01 00:00:00 UTC (0)

<4>Warning: unable to open an initial console.

<6>Freeing init memory: 292K

<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.

<7>usb 2-1: link qh256-0001/e8a2e4a0 start 1 [1/0 us]

<7>hub 2-1:1.0: state 7 ports 3 chg 0000 evt 0000

<3>init: cannot open '/initlogo.rle'

<6>mmc0: new high speed SDHC card at address 0007

<6>mmcblk0: mmc0:0007 SD4GB 3.67 GiB

<6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >

<6>EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)

<7>hub 1-0:1.0: hub_suspend

<7>usb usb1: bus auto-suspend, wakeup 1

<7>mxc-ehci ehci-mxc.0: suspend root hub

<7>hub 2-1:1.0: hub_suspend

<7>usb 2-1: unlink qh256-0001/e8a2e4a0 start 1 [1/0 us]

<7>usb 2-1: usb auto-suspend, wakeup 1

<6>EXT4-fs (mmcblk0p5): recovery complete

<6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)

<6>EXT4-fs (mmcblk0p6): recovery complete

<6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)

<4>Disabling lock debugging due to kernel taint

<3>init: service 'console' requires console

<3>init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'

<3>init: service 'console' requires console

<7>hub 2-0:1.0: hub_suspend

<7>usb usb2: bus auto-suspend, wakeup 1

<7>mxc-ehci ehci-mxc.1: suspend root hub

<6>warning: `rild' uses 32-bit capabilities (legacy support in use)

<6>request_suspend_state: wakeup (3->0) at 29110575997 (1970-01-02 00:00:09.402363151 UTC)

<6>alarm_release: clear alarm, pending 0

<6>request_suspend_state: wakeup (0->0) at 35353204602 (1970-01-02 00:00:15.644991150 UTC)

I don't know what to do, it looks like something is miising, but i don't know what and i don't know how to fix it. However, on the screen, i cn see the boot sreen of android (steel letters of android with a reflect), a friend said that i have to download the sources of android and build them, is it true?

Best Regards

Alexandre

topic Re: How booting Android on imx6 in i.MX Processors

How booting Android on imx6

Re: How booting Android on imx6

Re: How booting Android on imx6