autologin problem

dhseok — Wed, 23 Jul 2014 06:29:17 GMT

Hi, I'm using i.MX6, and i want to do "autologin" without inserting 'username(root)' after finish booting on the board.

----------------------------------------------------------

freescale login: root

Password:

----------------------------------------------------------

There are similar problem on the web.. they give solutions that I have to modify a file : '/etc/inittab'

My 'inittab' file is below

----------------------------------------------------------

::sysinit:/etc/rc.d/rcS

::respawn:/etc/rc.d/rc_mxc.S

::sysinit:/etc/rc.d/rc_gpu.S

::ctrlaltdel:/sbin/reboot

::shutdown:/etc/rc.d/rcS stop

::restart:/sbin/init

----------------------------------------------------------

it is different from others on the web.

So, i have tried several times,, but could't solve this problem

somebody has solutions about the problem?

thank you

Re: autologin problem

radhikasomaiya — Mon, 30 Sep 2019 14:14:10 GMT

Hi Donghee Seok,

You can follow the below steps (to autologin in imx6q) after getting the boards console in minicom. (You need to login at least one time then you can do changes as per below.)

1. $ cp /lib/systemd/system/serial-getty@.service /etc/systemd/system/getty.target.wants/serial-getty@<console>.service

2. And append the "-a root" for auto login: (in /etc/systemd/system/getty.target.wants/serial-getty@<console>.service).

$ ExecStart=-/sbin/agetty -8 -a root -L %I 115200 $TERM

Regards,

Radhika Somaiya.

topic Re: autologin problem in i.MX Processors

autologin problem

Re: autologin problem