topic Re: IMX28 Pin Configuration in i.MX Processors

IMX28 Pin Configuration

pt — Tue, 15 Jul 2014 05:34:10 GMT

We have MCIMX28EVK board and a board with imx28 (designed by us).

We are using freescale L2.6.35_1.1.0_130130_source.

Our board uses AUART0 pins for debug uart.

I have seen the debug uart pins are defined in mx28evk_pins.c( /arch/arm/mach-mx28 )

static struct pin_desc mx28evk_fixed_pins[] = {

{

.name = "DUART.RX",

.id = PINID_PWM0,

.fun = PIN_FUN3,

{

.name = "DUART.TX",

.id = PINID_PWM1,

.fun = PIN_FUN3,

...

}

I am using AUART0_CTS and AUART_RTS as DUART_RX and DUART_TX.

So I have edited the struct like the following

static struct pin_desc mx28evk_fixed_pins[] = {

{

.name = "DUART.RX",

.id = PINID_AUART0_CTS,

.fun = PIN_FUN3,

{

.name = "DUART.TX",

.id = PINID_AUART0_RTS,

.fun = PIN_FUN3,

...

}

Is this change enough for the imx board?

Regards

Re: IMX28 Pin Configuration

igorpadykov — Tue, 15 Jul 2014 13:11:21 GMT

Hi Pt

yes, this is enough. Also please check that these

pins are not used for other purposes. And one can wish

to set AUART0 as debug UART for iROM, check sect.12.3.1 OTP eFuse

i.MX28 RM

HW_OCOTP_ROM0:0x8002C1A0:1:0

USE_ALT_DEBUG_UART_PINS[1:0] =01 - AUART0

Best regards

chip

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: IMX28 Pin Configuration

pt — Tue, 15 Jul 2014 14:18:37 GMT

Thanks igorpadykov.

Auart0 is not used for other purposes. I am using AUART2 for app uart.

Regards

Re: IMX28 Pin Configuration

igorpadykov — Tue, 15 Jul 2014 14:29:57 GMT

Hi Pt

you can add some codes (or try to check with jtag)

registers value .

Best regards

chip

Re: IMX28 Pin Configuration

pt — Wed, 16 Jul 2014 04:34:37 GMT

Ok igorpadykov. I will try this on my board and will come back to you if I need any help.

Thank you