topic Re: mx6 + rtl8111e driver in i.MX Processors

mx6 + rtl8111e driver

tarterkit_ru — Sat, 05 Apr 2014 16:14:44 GMT

Hi, i have custom imx6 board Hola-PC http://starterkit.ru/html/index.php?name=shop&op=view&id=99

Now i try create mPCIe plug for this board, based on RTL8111E chip.

After patching of my board file and compiling driver from realtek site r8168-8.038.00, i can see my extension board:

# dmesg | grep PCI

PCI: CLS 0 bytes, default 32

iMX6 PCIe PCIe RC mode imx_pcie_pltfm_probe entering.

PCIE: imx_pcie_pltfm_probe start link up.

IMX PCIe port: link up.

PCI: bus0: Fast back to back transfers disabled

PCI: bus1: Fast back to back transfers disabled

pci 0000:00:00.0: BAR 0: set to [mem 0x01000000-0x010fffff 64bit pref] (PCI address [0x1000000-0x10fffff])

pci 0000:01:00.0: BAR 4: set to [mem 0x01100000-0x01103fff 64bit pref] (PCI address [0x1100000-0x1103fff])

pci 0000:01:00.0: BAR 2: set to [mem 0x01104000-0x01104fff 64bit pref] (PCI address [0x1104000-0x1104fff])

pci 0000:01:00.0: BAR 0: set to [io 0x1e00000-0x1e000ff] (PCI address [0x1e00000-0x1e000ff])

pci 0000:00:00.0: PCI bridge to [bus 01-01]

PCI: enabling device 0000:01:00.0 (0140 -> 0143)

# dmesg | grep 8168

pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200

r8168 Gigabit Ethernet driver 8.038.00-NAPI loaded

r8168 0000:01:00.0: no MSI. Back to INTx.

r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

r8168: eth2: link up

But, connections working only after software reset (reboot) and can't work any stress interconnections (like iperf, ftp, http), working only ping

Re: mx6 + rtl8111e driver

b47504 — Thu, 08 May 2014 02:55:18 GMT

Can you please share your kernel log and user space log when the issue occurred and the normal log using ping command?

If you can provide the TLP data when the issue appeared, it will be more helpful to address the issue. And please also paste the connect status with AP or other wifi partner as you test.

Re: mx6 + rtl8111e driver

YixingKong — Tue, 13 May 2014 06:42:07 GMT

Pavel

Could you please reply our engineer's question? If your issue had been resolved, please tell us and we will close the discussion.

Thanks,

Yixing

Re: mx6 + rtl8111e driver

YixingKong — Mon, 19 May 2014 05:43:13 GMT

Pavel

We have not got your response yet and will close the discussion in 3 days. If you still need help, please feel free to reply with an update to this discussion.

Thanks,

Yixing

Re: mx6 + rtl8111e driver

carmilili — Wed, 21 May 2014 04:12:34 GMT

Hello Pavel

I meet the same problem with you now.Did you solve it?

My board is IMX6Q-SDB.The mPCIE card is RTL8111e or RTL8111f.

(1)

root@freescale /app/net$ifconfig

eth0 Link encap:Ethernet HWaddr 00:04:9F:02:6E:25

inet addr:192.168.2.67 Bcast:192.168.2.255 Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:109724 errors:0 dropped:903 overruns:0 frame:0

TX packets:7501 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:17633802 (16.8 MiB) TX bytes:1108875 (1.0 MiB)

eth1 Link encap:Ethernet HWaddr 00:13:3B:0E:D1:10

inet addr:10.0.0.1 Bcast:10.255.255.255 Mask:255.0.0.0

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:18112 errors:0 dropped:142 overruns:0 frame:0

TX packets:23 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:1537208 (1.4 MiB) TX bytes:1494 (1.4 KiB)

Interrupt:155 Base address:0xe000

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:14 errors:0 dropped:0 overruns:0 frame:0

TX packets:14 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:1136 (1.1 KiB) TX bytes:1136 (1.1 KiB)

(2)

root@freescale /app/net$ ping 10.0.0.2

PING 10.0.0.2 (10.0.0.2): 56 data bytes

64 bytes from 10.0.0.2: seq=0 ttl=64 time=10.165 ms

64 bytes from 10.0.0.2: seq=1 ttl=64 time=0.230 ms

......

(3)

When I use the commad tftp ssh and iperf to test it ,all to be failure.

root@freescale /app/net$ ssh -v root@10.0.0.2

OpenSSH_4.3p2, OpenSSL 1.0.1c 10 May 2012

debug1: Reading configuration data /etc/ssh/ssh_config

debug1: Connecting to 10.0.0.2 [10.0.0.2] port 22.

debug1: Connection established.

debug1: permanently_set_uid: 0/0

debug1: identity file /root/.ssh/identity type -1

debug1: identity file /root/.ssh/id_rsa type -1

debug1: identity file /root/.ssh/id_dsa type -1

debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3

debug1: match: OpenSSH_5.3 pat OpenSSH*

debug1: Enabling compatibility mode for protocol 2.0

debug1: Local version string SSH-2.0-OpenSSH_4.3

debug1: SSH2_MSG_KEXINIT sent

debug1: SSH2_MSG_KEXINIT received

debug1: kex: server->client aes128-cbc hmac-md5 none

debug1: kex: client->server aes128-cbc hmac-md5 none

debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent

debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP

It stops here.

Re: mx6 + rtl8111e driver

carmilili — Wed, 21 May 2014 07:02:58 GMT

When I set the MTU = 500,it looks like work well .But when I use the tools of iperf to test it .The network card can not exit the thread sometimes later.

$ifconfig eth1 mtu 500

Re: mx6 + rtl8111e driver

tarterkit_ru — Wed, 21 May 2014 09:22:24 GMT

We postponed it.

In progress, we was make different drivers from Realtek and after some edition i have stable link few time but only after software reset ...

After we try use 3.10.17 kernel - not better.

Later begin to development again.

Re: mx6 + rtl8111e driver

carmilili — Wed, 21 May 2014 09:56:10 GMT

Can you tell me where do I need to modify?

Thank you .

Re: mx6 + rtl8111e driver

tarterkit_ru — Thu, 22 May 2014 07:43:10 GMT

I don't know where You must modify, we postponed it to better time.

Re: mx6 + rtl8111e driver

xiaoqianlin — Sat, 25 Oct 2014 11:07:51 GMT

any patch on this issue?

Re: mx6 + rtl8111e driver

Sasamy — Sat, 25 Oct 2014 15:40:47 GMT

Hi Xiaoqian Lin

Re: Re: On IMX6Q-SDB, some PCIe devies can't be dectected?

Re: mx6 + rtl8111e driver

fabio_estevam — Sat, 25 Oct 2014 17:18:00 GMT

Hi Alexander,

It would be nice if you could send this patch for review in the netdev@vger.kernel.org list.

Re: mx6 + rtl8111e driver

Sasamy — Mon, 27 Oct 2014 14:45:34 GMT

Hi Fabio,

thank you for your work in the mainline Linux kernel. This patch is not for mainline Linux - only workaround local problem, change MRRS on the PCIe device side without known host capability - a bad idea, but on some systems, the removal of this optimization can lead to poor performance. I think more correctly like this

Re: [PATCH - v4] PCI: keystone: add a pci quirk to limit mrrs -- Linux PCI

Re: mx6 + rtl8111e driver

fabio_estevam — Mon, 27 Oct 2014 14:54:04 GMT

Hi Alexander,

Thanks for the clarification.

It would be really nice if someone that has access to the rtl8111e hardware could try to come with a proper patch for mainline inclusion. The patch from the link you sent may be worth to explore.

Regards,

Fabio Estevam

Re: mx6 + rtl8111e driver

guochgz — Fri, 17 Apr 2015 07:38:40 GMT

hi, Carmili Li

We also meet this problem, did you have solved it? can you tell me what to do ? thanks!