How to start programming i.mx6

ganeshh — Wed, 30 Apr 2014 09:50:12 GMT

Hi,

Am having Wand board which is having i.mx6. How to start programming Wand board? Is there any documents available? How to access GPIOS,I2C,UART etc? Can we program wand board without any OS?

Re: How to start programming i.mx6

SergioSolis — Wed, 30 Apr 2014 14:48:06 GMT

Yes, you can program a board without an OS, but I would suggest you visit the wandboard website to download their documentation.

You can find the bare metal SDK for the i.mx6 (I haven't tried it with the wandboard though):

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q&fpsp=1&tab=Design_Tools_Tab

Under: "Software Development Tools" >> "Software Development Kits"

Best regards,
Sergio

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic How to start programming i.mx6 in i.MX Processors

How to start programming i.mx6

Re: How to start programming i.mx6