How to mount yaffs on NAND

jvidalsm — Fri, 28 Mar 2014 08:36:56 GMT

Hi everyone,

I have a iMX6 Q processor whit NAND flash.

The NAND uses ubifs like file system.

According the source code, I have two methods to mount a system.img

Used for NAND: device/fsl/imx6/etc/fstab_nand.freescale

----------------------------------------------------------------------------------

ubi0:system

/system

ubifs

wait

ubi0:data /data ubifs nosuid,nodev,nodiratime,noatime wait

ubi0:cache /cache ubifs nosuid,nodev wait

ubi0:device /device ubifs nosuid,nodev wait

Used for SD-card: device/fsl/imx6/etc/fstab.freescale

-------------------------------------------------------------------------------

/dev/block/mmcblk0p5 /system ext4 ro wait

/dev/block/mmcblk0p4 /data ext4 nosuid,nodev,nodiratime,noatime,nomblk_io_submit,noauto_da_alloc,errors=panic wait,encryptable=footer

/dev/block/mmcblk0p6 /cache ext4 nosuid,nodev,nomblk_io_submit wait

/dev/block/mmcblk0p7 /device ext4 ro,nosuid,nodev

I have a system.img file which uses yaffs like file system.

How I make to mount the system.img file to mount point. I mean, to "/system" ?

I hope for your help.

Thanks in advance.

Best regards.

jvidalsm

topic How to mount yaffs on NAND in i.MX Processors