topic Re: Re: question about use MFGtools in i.MX Processors

question about use MFGtools

eddyliu — Tue, 25 Mar 2014 06:19:03 GMT

hi all,

I am working on PCIMX6S6AVM08AB and use Mfgtools-Rel-4.1.0_130816_MX6DL_UPDATER to down load u-boot uImage and fs to eMMC.

in my ucl2.xml:

Header 1
<LIST name="i.MX6SOLO-SABRESD-SD" desc="Choose SD as media"> <CMD state="BootStrap" type="boot" body="BootStrap" file ="u-boot-mx6solo-sabresd.bin" >Loading U-boot</CMD> <CMD state="BootStrap" type="load" file="uImage" address="0x10800000" loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >Loading Kernel.</CMD> <CMD state="BootStrap" type="load" file="initramfs.cpio.gz.uboot" address="0x10C00000" loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >Loading Initramfs.</CMD> <CMD state="BootStrap" type="jump" > Jumping to OS image. </CMD> <CMD state="Updater" type="push" body="$ ls /dev/">ls -l /dev/</CMD>

Header 1

<LIST name="i.MX6SOLO-SABRESD-SD" desc="Choose SD as media">
    <CMD state="BootStrap" type="boot" body="BootStrap" file ="u-boot-mx6solo-sabresd.bin" >Loading U-boot</CMD>
    <CMD state="BootStrap" type="load" file="uImage" address="0x10800000"
        loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >Loading Kernel.</CMD>
    <CMD state="BootStrap" type="load" file="initramfs.cpio.gz.uboot" address="0x10C00000"
        loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >Loading Initramfs.</CMD>
    <CMD state="BootStrap" type="jump" > Jumping to OS image. </CMD>

    <CMD state="Updater" type="push" body="$ ls /dev/">ls -l /dev/</CMD>

on terminal:

Header 1
U-Boot 2009.08 (Aug 16 2013 - 15:02:51) CPU: Freescale i.MX6 family TO1.1 at 792 MHz Thermal sensor with ratio = 188 Temperature: 40 C, calibration data 0x5a34e87d mx6q pll1: 792MHz mx6q pll2: 528MHz mx6q pll3: 480MHz mx6q pll8: 50MHz ipg clock : 66000000Hz ipg per clock : 66000000Hz uart clock : 80000000Hz cspi clock : 60000000Hz ahb clock : 132000000Hz axi clock : 198000000Hz emi_slow clock: 99000000Hz ddr clock : 396000000Hz usdhc1 clock : 198000000Hz usdhc2 clock : 198000000Hz usdhc3 clock : 198000000Hz usdhc4 clock : 198000000Hz nfc clock : 24000000Hz Board: i.MX6DL/Solo-SABRESD: unknown-board Board: 0x61011 [POR ] Boot Device: MMC I2C: ready DRAM: 512 MB MMC: FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3 Using default environment In: serial Out: serial Err: serial Net: got MAC address from IIM: 00:00:00:00:00:00 FEC0 [PRIME] Hit any key to stop autoboot: 0 ## Booting kernel from Legacy Image at 10800000 ... Image Name: Linux-3.0.35-2666-gbdde708 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3165516 Bytes = 3 MB Load Address: 10008000 Entry Point: 10008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 10c00000 ... Image Name: uboot initramfs rootfs Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4545326 Bytes = 4.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 3.0.35-2666-gbdde708 (r65388@shlinux3) (gcc version 4.6.2 20110630 (prerelease) (Freescale MAD -- Linaro 2011.07 -- Built at 2011/08/10 09 :20) ) #1 SMP PREEMPT Fri Aug 16 14:34:30 CST 2013 CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: Freescale i.MX 6Quad/DualLite/Solo Sabre-SD Board Memory policy: ECC disabled, Data cache writealloc CPU identified as i.MX6DL/SOLO, silicon rev 1.1 PERCPU: Embedded 7 pages/cpu @8bc06000 s5184 r8192 d15296 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97280 Kernel command line: console=ttymxc0,115200 rdinit=/linuxrc enable_wait_mode=off nosmp PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384MB = 384MB total Memory: 377924k/377924k available, 146364k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xf4600000 - 0xffe00000 ( 184 MB) vmalloc : 0xa0800000 - 0xf2000000 (1304 MB) lowmem : 0x80000000 - 0xa0000000 ( 512 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .init : 0x80008000 - 0x8003a000 ( 200 kB) .text : 0x8003a000 - 0x805ada70 (5583 kB) .data : 0x805ae000 - 0x805fc880 ( 315 kB) .bss : 0x805fc8a4 - 0x806277f4 ( 172 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:624 MXC GPIO hardware sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms Set periph_clk's parent to pll2_pfd_400M! arm_max_freq=800MHz MXC_Early serial console at MMIO 0x2020000 (options '115200') bootconsole [ttymxc0] enabled Console: colour dummy device 80x30 Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available Brought up 1 CPUs SMP: Total of 1 processors activated (1581.05 BogoMIPS). print_constraints: dummy: NET: Registered protocol family 16 print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step. hw-breakpoint: maximum watchpoint size is 4 bytes. L310 cache controller enabled l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02050000, Cache size: 524288 B bio: create slab <bio-0> at 0 mxs-dma mxs-dma-apbh: initialized print_constraints: SPKVDD: 4200 mV print_constraints: vmmc: 3300 mV SCSI subsystem initialized spi_imx imx6q-ecspi.0: probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb mc_pfuze 1-0008: recv failed!:-5,80 mc_pfuze: probe of 1-0008 failed with error -1 imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) Advanced Linux Sound Architecture Driver Version 1.0.24. Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized max17135 2-0048: PMIC MAX17135 for eInk display i2c-core: driver [max17135] using legacy suspend method i2c-core: driver [max17135] using legacy resume method Switching to clocksource mxc_timer1 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 196608 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Freeing initrd memory: 4436K PMU: registered new PMU device of type 0 Static Power Management for Freescale i.MX6 wait mode is disabled for i.MX6 cpaddr = a0820000 suspend_iram_base=a08b4000 PM driver module loaded IMX usb wakeup probe cpu regulator mode:ldo_enable i.MXC CPU frequency driver JFFS2 version 2.2. (NAND) Â© 2001-2006 Red Hat, Inc. msgmni has been set to 746 cryptodev: driver loaded. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver ldb _regulator_get: get() with no identifier imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) Console: switching to colour frame buffer device 128x48 mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver ldb imx-sdma imx-sdma: loaded firmware 1.1 imx-sdma imx-sdma: initialized Serial: IMX driver imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX console [ttymxc0] enabled, bootconsole disabled console [ttymxc0] enabled, bootconsole disabled loop: module loaded m25p80 spi0.0: unrecognized JEDEC id ffffff GPMI NAND driver registered. (IMX) vcan: Virtual CAN interface driver FEC Ethernet Driver fec_enet_mii_bus: probed Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ARC USBOTG Device Controller driver (1 August 2005) add wake up source irq 75 g_file_storage gadget: controller 'fsl-usb2-udc' not recognized check_parameters:UTP settings are in place now, overriding defaults g_file_storage gadget: No serial-number string provided! g_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010 g_file_storage gadget: Number of LUNs=1 fsl-usb2-udc: bind to driver g_file_storage mousedev: PS/2 mouse device common for all mice egalax_ts 1-0004: egalax_ts: failed to read firmware version egalax_ts: probe of 1-0004 failed with error -5 egalax_ts 2-0004: egalax_ts: failed to read firmware version egalax_ts: probe of 2-0004 failed with error -5 snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0 i2c /dev entries driver Linux video capture interface: v2.00 mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16 mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17 mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18 imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1) Bluetooth: Virtual HCI driver ver 1.3 Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc0: SDHCI controller on platform [sdhci-esdhc-imx.3] using ADMA mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using ADMA mmc2: SDHCI controller on platform [sdhci-esdhc-imx.2] using ADMA mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed VPU initialized mxc_asrc registered usbcore: registered new interface driver usbhid usbhid: USB HID core driver Cirrus Logic CS42888 ALSA SoC Codec Driver i2c-core: driver [cs42888] using legacy suspend method i2c-core: driver [cs42888] using legacy resume method imx-hdmi-soc-dai imx-hdmi-soc-dai.0: Failed: Load HDMI-video first. imx_3stack asoc driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 can: controller area network core (rev 20090105 abi 8) NET: Registered protocol family 29 can: raw protocol (rev 20090105) can: broadcast manager protocol (rev 20090105 t) Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 Bus freq driver module loaded Bus freq driver Enabled mxc_dvfs_core_probe DVFS driver module loaded regulator_init_complete: SPKVDD: incomplete constraints, leaving on snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0) Freeing init memory: 200K Starting UTP ln: /etc/mtab: File exists disable turn off display Starting the hotplug events dispatcher udevd Synthesizing initial hotplug events udevd (2079): /proc/2079/oom_adj is deprecated, please use /proc/2079/oom_score_adj instead. g_file_storage gadget: high speed config #1 uuc 0.4 [built Aug 16 2013 01:24:08] UTP: Waiting for device to appear UTP: file/device node /dev/utp already exists cpu_id is 0 UTP: received command '$ ls /dev/' UTP: executing "ls /dev/" XOR ptyra tty25 ttyr0 apm_bios ptyrb tty26 ttyr1 console ptyrc tty27 ttyr2 cpu_dma_latency ptyrd tty28 ttyr3 crypto ptyre tty29 ttyr4 fb ptyrf tty3 ttyr5 fb0 ptys0 tty30 ttyr6 fb1 ptys1 tty31 ttyr7 fb2 ptys2 tty32 ttyr8 full ptys3 tty33 ttyr9 i2c-0 ptys4 tty34 ttyra i2c-1 ptys5 tty35 ttyrb i2c-2 ptys6 tty36 ttyrc i2c-3 ptys7 tty37 ttyrd input ptys8 tty38 ttyre kmem ptys9 tty39 ttyrf kmsg ptysa tty4 ttys0 loop0 ptysb tty40 ttys1 loop1 ptysc tty41 ttys2 loop2 ptysd tty42 ttys3 loop3 ptyse tty43 ttys4 loop4 ptysf tty44 ttys5 loop5 ptyt0 tty45 ttys6 loop6 ptyt1 tty46 ttys7 loop7 ptyt2 tty47 ttys8 mem ptyt3 tty48 ttys9 mxc_asrc ptyt4 tty49 ttysa mxc_hdmi ptyt5 tty5 ttysb mxc_ipu ptyt6 tty50 ttysc mxc_mem ptyt7 tty51 ttysd mxc_vpu ptyt8 tty52 ttyse mxs_viim ptyt9 tty53 ttysf network_latency ptyta tty54 ttyt0 network_throughput ptytb tty55 ttyt1 null ptytc tty56 ttyt2 psaux ptytd tty57 ttyt3 ptmx ptyte tty58 ttyt4 pts ptytf tty59 ttyt5 ptya0 ptyu0 tty6 ttyt6 ptya1 ptyu1 tty60 ttyt7 ptya2 ptyu2 tty61 ttyt8 ptya3 ptyu3 tty62 ttyt9 ptya4 ptyu4 tty63 ttyta ptya5 ptyu5 tty7 ttytb ptya6 ptyu6 tty8 ttytc ptya7 ptyu7 tty9 ttytd ptya8 ptyu8 ttya0 ttyte ptya9 ptyu9 ttya1 ttytf ptyaa ptyua ttya2 ttyu0 ptyab ptyub ttya3 ttyu1 ptyac ptyuc ttya4 ttyu2 ptyad ptyud ttya5 ttyu3 ptyae ptyue ttya6 ttyu4 ptyaf ptyuf ttya7 ttyu5 ptyb0 ptyv0 ttya8 ttyu6 ptyb1 ptyv1 ttya9 ttyu7 ptyb2 ptyv2 ttyaa ttyu8 ptyb3 ptyv3 ttyab ttyu9 ptyb4 ptyv4 ttyac ttyua ptyb5 ptyv5 ttyad ttyub ptyb6 ptyv6 ttyae ttyuc ptyb7 ptyv7 ttyaf ttyud ptyb8 ptyv8 ttyb0 ttyue ptyb9 ptyv9 ttyb1 ttyuf ptyba ptyva ttyb2 ttyv0 ptybb ptyvb ttyb3 ttyv1 ptybc ptyvc ttyb4 ttyv2 ptybd ptyvd ttyb5 ttyv3 ptybe ptyve ttyb6 ttyv4 ptybf ptyvf ttyb7 ttyv5 ptyc0 ptyw0 ttyb8 ttyv6 ptyc1 ptyw1 ttyb9 ttyv7 ptyc2 ptyw2 ttyba ttyv8 ptyc3 ptyw3 ttybb ttyv9 ptyc4 ptyw4 ttybc ttyva ptyc5 ptyw5 ttybd ttyvb ptyc6 ptyw6 ttybe ttyvc ptyc7 ptyw7 ttybf ttyvd ptyc8 ptyw8 ttyc0 ttyve ptyc9 ptyw9 ttyc1 ttyvf ptyca ptywa ttyc2 ttyw0 ptycb ptywb ttyc3 ttyw1 ptycc ptywc ttyc4 ttyw2 ptycd ptywd ttyc5 ttyw3 ptyce ptywe ttyc6 ttyw4 ptycf ptywf ttyc7 ttyw5 ptyd0 ptyx0 ttyc8 ttyw6 ptyd1 ptyx1 ttyc9 ttyw7 ptyd2 ptyx2 ttyca ttyw8 ptyd3 ptyx3 ttycb ttyw9 ptyd4 ptyx4 ttycc ttywa ptyd5 ptyx5 ttycd ttywb ptyd6 ptyx6 ttyce ttywc ptyd7 ptyx7 ttycf ttywd ptyd8 ptyx8 ttyd0 ttywe ptyd9 ptyx9 ttyd1 ttywf ptyda ptyxa ttyd2 ttyx0 ptydb ptyxb ttyd3 ttyx1 ptydc ptyxc ttyd4 ttyx2 ptydd ptyxd ttyd5 ttyx3 ptyde ptyxe ttyd6 ttyx4 ptydf ptyxf ttyd7 ttyx5 ptye0 ptyy0 ttyd8 ttyx6 ptye1 ptyy1 ttyd9 ttyx7 ptye2 ptyy2 ttyda ttyx8 ptye3 ptyy3 ttydb ttyx9 ptye4 ptyy4 ttydc ttyxa ptye5 ptyy5 ttydd ttyxb ptye6 ptyy6 ttyde ttyxc ptye7 ptyy7 ttydf ttyxd ptye8 ptyy8 ttye0 ttyxe ptye9 ptyy9 ttye1 ttyxf ptyea ptyya ttye2 ttyy0 ptyeb ptyyb ttye3 ttyy1 ptyec ptyyc ttye4 ttyy2 ptyed ptyyd ttye5 ttyy3 ptyee ptyye ttye6 ttyy4 ptyef ptyyf ttye7 ttyy5 ptyp0 ptyz0 ttye8 ttyy6 ptyp1 ptyz1 ttye9 ttyy7 ptyp2 ptyz2 ttyea ttyy8 ptyp3 ptyz3 ttyeb ttyy9 ptyp4 ptyz4 ttyec ttyya ptyp5 ptyz5 ttyed ttyyb ptyp6 ptyz6 ttyee ttyyc ptyp7 ptyz7 ttyef ttyyd ptyp8 ptyz8 ttymxc0 ttyye ptyputp_poll: pass returned. 9 ptyz9 ttymxc2 ttyyf ptypa ptyza ttyp0 ttyz0 ptypb ptyzb ttyp1 ttyz1 ptypc ptyzc ttyp2 ttyz2 ptypd ptyzd ttyp3 ttyz3 ptype ptyze ttyp4 ttyz4 ptypf ptyzf ttyp5 ttyz5 ptyq0 random ttyp6 ttyz6 ptyq1 rfkill ttyp7 ttyz7 ptyq2 rtc ttyp8 ttyz8 ptyq3 rtc0 ttyp9 ttyz9 ptyq4 shm ttypa ttyza ptyq5 snd ttypb ttyzb ptyq6 tracebuf ttypc ttyzc ptyq7 tty ttypd ttyzd ptyq8 tty0 ttype ttyze ptyq9 tty1 ttypf ttyzf ptyqa tty10 ttyq0 ubi_ctrl ptyqb tty11 ttyq1 urandom ptyqc tty12 ttyq2 utp ptyqd tty13 ttyq3 vcs ptyqe tty14 ttyq4 vcs1 ptyqf tty15 ttyq5 vcsa ptyr0 tty16 ttyq6 vcsa1 ptyr1 tty17 ttyq7 vhci ptyr2 tty18 ttyq8 video16 ptyr3 tty19 ttyq9 video17 ptyr4 tty2 ttyqa video18 ptyr5 tty20 ttyqb watchdog ptyr6 tty21 ttyqc zero ptyr7 tty22 ttyqd ptyr8 tty23 ttyqe ptyr9 tty24 ttyqf UTP: sending Success to kernel for command $ ls /dev/.

Header 1

U-Boot 2009.08 (Aug 16 2013 - 15:02:51)

CPU: Freescale i.MX6 family TO1.1 at 792 MHz
Thermal sensor with ratio = 188
Temperature:   40 C, calibration data 0x5a34e87d
mx6q pll1: 792MHz
mx6q pll2: 528MHz
mx6q pll3: 480MHz
mx6q pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 99000000Hz
ddr clock     : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
nfc clock     : 24000000Hz
Board: i.MX6DL/Solo-SABRESD: unknown-board Board: 0x61011 [POR ]
Boot Device: MMC
I2C:   ready
DRAM: 512 MB
MMC:   FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   got MAC address from IIM: 00:00:00:00:00:00
FEC0 [PRIME]
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 10800000 ...
   Image Name:   Linux-3.0.35-2666-gbdde708
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3165516 Bytes = 3 MB
   Load Address: 10008000
   Entry Point: 10008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 10c00000 ...
   Image Name:   uboot initramfs rootfs
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    4545326 Bytes = 4.3 MB
   Load Address: 00000000
   Entry Point: 00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 3.0.35-2666-gbdde708 (r65388@shlinux3) (gcc version 4.6.2 20110630 (prerelease) (Freescale MAD -- Linaro 2011.07 -- Built at 2011/08/10 09
:20) ) #1 SMP PREEMPT Fri Aug 16 14:34:30 CST 2013
CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Freescale i.MX 6Quad/DualLite/Solo Sabre-SD Board
Memory policy: ECC disabled, Data cache writealloc
CPU identified as i.MX6DL/SOLO, silicon rev 1.1
PERCPU: Embedded 7 pages/cpu @8bc06000 s5184 r8192 d15296 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97280
Kernel command line: console=ttymxc0,115200 rdinit=/linuxrc enable_wait_mode=off nosmp
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384MB = 384MB total
Memory: 377924k/377924k available, 146364k reserved, 0K highmem
Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xf4600000 - 0xffe00000   ( 184 MB)
    vmalloc : 0xa0800000 - 0xf2000000   (1304 MB)
    lowmem : 0x80000000 - 0xa0000000   ( 512 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7f000000 - 0x7fe00000   ( 14 MB)
      .init : 0x80008000 - 0x8003a000   ( 200 kB)
      .text : 0x8003a000 - 0x805ada70   (5583 kB)
      .data : 0x805ae000 - 0x805fc880   ( 315 kB)
       .bss : 0x805fc8a4 - 0x806277f4   ( 172 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:624
MXC GPIO hardware
sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
Set periph_clk's parent to pll2_pfd_400M!
arm_max_freq=800MHz
MXC_Early serial console at MMIO 0x2020000 (options '115200')
bootconsole [ttymxc0] enabled
Console: colour dummy device 80x30
Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Brought up 1 CPUs
SMP: Total of 1 processors activated (1581.05 BogoMIPS).
print_constraints: dummy:
NET: Registered protocol family 16
print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal
print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
hw-breakpoint: maximum watchpoint size is 4 bytes.
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02050000, Cache size: 524288 B
bio: create slab <bio-0> at 0
mxs-dma mxs-dma-apbh: initialized
print_constraints: SPKVDD: 4200 mV
print_constraints: vmmc: 3300 mV
SCSI subsystem initialized
spi_imx imx6q-ecspi.0: probed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc_pfuze 1-0008: recv failed!:-5,80
mc_pfuze: probe of 1-0008 failed with error -1
imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
max17135 2-0048: PMIC MAX17135 for eInk display
i2c-core: driver [max17135] using legacy suspend method
i2c-core: driver [max17135] using legacy resume method
Switching to clocksource mxc_timer1
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Freeing initrd memory: 4436K
PMU: registered new PMU device of type 0
Static Power Management for Freescale i.MX6
wait mode is disabled for i.MX6
cpaddr = a0820000 suspend_iram_base=a08b4000
PM driver module loaded
IMX usb wakeup probe
cpu regulator mode:ldo_enable
i.MXC CPU frequency driver
JFFS2 version 2.2. (NAND) Â© 2001-2006 Red Hat, Inc.
msgmni has been set to 746
cryptodev: driver loaded.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver ldb
_regulator_get: get() with no identifier
imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
Console: switching to colour frame buffer device 128x48
mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver ldb
imx-sdma imx-sdma: loaded firmware 1.1
imx-sdma imx-sdma: initialized
Serial: IMX driver
imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
console [ttymxc0] enabled, bootconsole disabled
console [ttymxc0] enabled, bootconsole disabled
loop: module loaded
m25p80 spi0.0: unrecognized JEDEC id ffffff
GPMI NAND driver registered. (IMX)
vcan: Virtual CAN interface driver
FEC Ethernet Driver
fec_enet_mii_bus: probed
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ARC USBOTG Device Controller driver (1 August 2005)
add wake up source irq 75
g_file_storage gadget: controller 'fsl-usb2-udc' not recognized
check_parameters:UTP settings are in place now, overriding defaults
g_file_storage gadget: No serial-number string provided!
g_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010
g_file_storage gadget: Number of LUNs=1
fsl-usb2-udc: bind to driver g_file_storage
mousedev: PS/2 mouse device common for all mice
egalax_ts 1-0004: egalax_ts: failed to read firmware version
egalax_ts: probe of 1-0004 failed with error -5
egalax_ts 2-0004: egalax_ts: failed to read firmware version
egalax_ts: probe of 2-0004 failed with error -5
snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: SDHCI controller on platform [sdhci-esdhc-imx.3] using ADMA
mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using ADMA
mmc2: SDHCI controller on platform [sdhci-esdhc-imx.2] using ADMA
mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
VPU initialized
mxc_asrc registered
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Cirrus Logic CS42888 ALSA SoC Codec Driver
i2c-core: driver [cs42888] using legacy suspend method
i2c-core: driver [cs42888] using legacy resume method
imx-hdmi-soc-dai imx-hdmi-soc-dai.0: Failed: Load HDMI-video first.
imx_3stack asoc driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Bus freq driver module loaded
Bus freq driver Enabled
mxc_dvfs_core_probe
DVFS driver module loaded
regulator_init_complete: SPKVDD: incomplete constraints, leaving on
snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
Freeing init memory: 200K
Starting UTP
ln: /etc/mtab: File exists
disable turn off display
Starting the hotplug events dispatcher udevd
Synthesizing initial hotplug events
udevd (2079): /proc/2079/oom_adj is deprecated, please use /proc/2079/oom_score_adj instead.
g_file_storage gadget: high speed config #1
uuc 0.4 [built Aug 16 2013 01:24:08]
UTP: Waiting for device to appear
UTP: file/device node /dev/utp already exists
cpu_id is 0
UTP: received command '$ ls /dev/'
UTP: executing "ls /dev/"
XOR                 ptyra               tty25               ttyr0
apm_bios            ptyrb               tty26               ttyr1
console             ptyrc               tty27               ttyr2
cpu_dma_latency     ptyrd               tty28               ttyr3
crypto              ptyre               tty29               ttyr4
fb                  ptyrf               tty3                ttyr5
fb0                 ptys0               tty30               ttyr6
fb1                 ptys1               tty31               ttyr7
fb2                 ptys2               tty32               ttyr8
full                ptys3               tty33               ttyr9
i2c-0               ptys4               tty34               ttyra
i2c-1               ptys5               tty35               ttyrb
i2c-2               ptys6               tty36               ttyrc
i2c-3               ptys7               tty37               ttyrd
input               ptys8               tty38               ttyre
kmem                ptys9               tty39               ttyrf
kmsg                ptysa               tty4                ttys0
loop0               ptysb               tty40               ttys1
loop1               ptysc               tty41               ttys2
loop2               ptysd               tty42               ttys3
loop3               ptyse               tty43               ttys4
loop4               ptysf               tty44               ttys5
loop5               ptyt0               tty45               ttys6
loop6               ptyt1               tty46               ttys7
loop7               ptyt2               tty47               ttys8
mem                 ptyt3               tty48               ttys9
mxc_asrc            ptyt4               tty49               ttysa
mxc_hdmi            ptyt5               tty5                ttysb
mxc_ipu             ptyt6               tty50               ttysc
mxc_mem             ptyt7               tty51               ttysd
mxc_vpu             ptyt8               tty52               ttyse
mxs_viim            ptyt9               tty53               ttysf
network_latency     ptyta               tty54               ttyt0
network_throughput ptytb               tty55               ttyt1
null                ptytc               tty56               ttyt2
psaux               ptytd               tty57               ttyt3
ptmx                ptyte               tty58               ttyt4
pts                 ptytf               tty59               ttyt5
ptya0               ptyu0               tty6                ttyt6
ptya1               ptyu1               tty60               ttyt7
ptya2               ptyu2               tty61               ttyt8
ptya3               ptyu3               tty62               ttyt9
ptya4               ptyu4               tty63               ttyta
ptya5               ptyu5               tty7                ttytb
ptya6               ptyu6               tty8                ttytc
ptya7               ptyu7               tty9                ttytd
ptya8               ptyu8               ttya0               ttyte
ptya9               ptyu9               ttya1               ttytf
ptyaa               ptyua               ttya2               ttyu0
ptyab               ptyub               ttya3               ttyu1
ptyac               ptyuc               ttya4               ttyu2
ptyad               ptyud               ttya5               ttyu3
ptyae               ptyue               ttya6               ttyu4
ptyaf               ptyuf               ttya7               ttyu5
ptyb0               ptyv0               ttya8               ttyu6
ptyb1               ptyv1               ttya9               ttyu7
ptyb2               ptyv2               ttyaa               ttyu8
ptyb3               ptyv3               ttyab               ttyu9
ptyb4               ptyv4               ttyac               ttyua
ptyb5               ptyv5               ttyad               ttyub
ptyb6               ptyv6               ttyae               ttyuc
ptyb7               ptyv7               ttyaf               ttyud
ptyb8               ptyv8               ttyb0               ttyue
ptyb9               ptyv9               ttyb1               ttyuf
ptyba               ptyva               ttyb2               ttyv0
ptybb               ptyvb               ttyb3               ttyv1
ptybc               ptyvc               ttyb4               ttyv2
ptybd               ptyvd               ttyb5               ttyv3
ptybe               ptyve               ttyb6               ttyv4
ptybf               ptyvf               ttyb7               ttyv5
ptyc0               ptyw0               ttyb8               ttyv6
ptyc1               ptyw1               ttyb9               ttyv7
ptyc2               ptyw2               ttyba               ttyv8
ptyc3               ptyw3               ttybb               ttyv9
ptyc4               ptyw4               ttybc               ttyva
ptyc5               ptyw5               ttybd               ttyvb
ptyc6               ptyw6               ttybe               ttyvc
ptyc7               ptyw7               ttybf               ttyvd
ptyc8               ptyw8               ttyc0               ttyve
ptyc9               ptyw9               ttyc1               ttyvf
ptyca               ptywa               ttyc2               ttyw0
ptycb               ptywb               ttyc3               ttyw1
ptycc               ptywc               ttyc4               ttyw2
ptycd               ptywd               ttyc5               ttyw3
ptyce               ptywe               ttyc6               ttyw4
ptycf               ptywf               ttyc7               ttyw5
ptyd0               ptyx0               ttyc8               ttyw6
ptyd1               ptyx1               ttyc9               ttyw7
ptyd2               ptyx2               ttyca               ttyw8
ptyd3               ptyx3               ttycb               ttyw9
ptyd4               ptyx4               ttycc               ttywa
ptyd5               ptyx5               ttycd               ttywb
ptyd6               ptyx6               ttyce               ttywc
ptyd7               ptyx7               ttycf               ttywd
ptyd8               ptyx8               ttyd0               ttywe
ptyd9               ptyx9               ttyd1               ttywf
ptyda               ptyxa               ttyd2               ttyx0
ptydb               ptyxb               ttyd3               ttyx1
ptydc               ptyxc               ttyd4               ttyx2
ptydd               ptyxd               ttyd5               ttyx3
ptyde               ptyxe               ttyd6               ttyx4
ptydf               ptyxf               ttyd7               ttyx5
ptye0               ptyy0               ttyd8               ttyx6
ptye1               ptyy1               ttyd9               ttyx7
ptye2               ptyy2               ttyda               ttyx8
ptye3               ptyy3               ttydb               ttyx9
ptye4               ptyy4               ttydc               ttyxa
ptye5               ptyy5               ttydd               ttyxb
ptye6               ptyy6               ttyde               ttyxc
ptye7               ptyy7               ttydf               ttyxd
ptye8               ptyy8               ttye0               ttyxe
ptye9               ptyy9               ttye1               ttyxf
ptyea               ptyya               ttye2               ttyy0
ptyeb               ptyyb               ttye3               ttyy1
ptyec               ptyyc               ttye4               ttyy2
ptyed               ptyyd               ttye5               ttyy3
ptyee               ptyye               ttye6               ttyy4
ptyef               ptyyf               ttye7               ttyy5
ptyp0               ptyz0               ttye8               ttyy6
ptyp1               ptyz1               ttye9               ttyy7
ptyp2               ptyz2               ttyea               ttyy8
ptyp3               ptyz3               ttyeb               ttyy9
ptyp4               ptyz4               ttyec               ttyya
ptyp5               ptyz5               ttyed               ttyyb
ptyp6               ptyz6               ttyee               ttyyc
ptyp7               ptyz7               ttyef               ttyyd
ptyp8               ptyz8               ttymxc0             ttyye
ptyputp_poll: pass returned.
9               ptyz9               ttymxc2             ttyyf
ptypa               ptyza               ttyp0               ttyz0
ptypb               ptyzb               ttyp1               ttyz1
ptypc               ptyzc               ttyp2               ttyz2
ptypd               ptyzd               ttyp3               ttyz3
ptype               ptyze               ttyp4               ttyz4
ptypf               ptyzf               ttyp5               ttyz5
ptyq0               random              ttyp6               ttyz6
ptyq1               rfkill              ttyp7               ttyz7
ptyq2               rtc                 ttyp8               ttyz8
ptyq3               rtc0                ttyp9               ttyz9
ptyq4               shm                 ttypa               ttyza
ptyq5               snd                 ttypb               ttyzb
ptyq6               tracebuf            ttypc               ttyzc
ptyq7               tty                 ttypd               ttyzd
ptyq8               tty0                ttype               ttyze
ptyq9               tty1                ttypf               ttyzf
ptyqa               tty10               ttyq0               ubi_ctrl
ptyqb               tty11               ttyq1               urandom
ptyqc               tty12               ttyq2               utp
ptyqd               tty13               ttyq3               vcs
ptyqe               tty14               ttyq4               vcs1
ptyqf               tty15               ttyq5               vcsa
ptyr0               tty16               ttyq6               vcsa1
ptyr1               tty17               ttyq7               vhci
ptyr2               tty18               ttyq8               video16
ptyr3               tty19               ttyq9               video17
ptyr4               tty2                ttyqa               video18
ptyr5               tty20               ttyqb               watchdog
ptyr6               tty21               ttyqc               zero
ptyr7               tty22               ttyqd
ptyr8               tty23               ttyqe
ptyr9               tty24               ttyqf
UTP: sending Success to kernel for command $ ls /dev/.

No eMMC relative device node is found in /dev/. now I want to use eMMC as boot device, can you tell me what I can do for that?

thanks sincerely.

Message was edited by: Eddy Liu

Re: question about use MFGtools

GraceH — Tue, 25 Mar 2014 06:45:02 GMT

Your log shows your board has no eMMC device. During kernel boot, you should see eMMC device is scanned.

DVFS driver module loaded

regulator_init_complete: PFUZE100_VGEN6: incomplete constraints, leaving on

mmc0: new high speed DDR MMC card at address 0001

mmcblk0: mmc0:0001 SEM08G 7.39 GiB

mmcblk0boot0: mmc0:0001 SEM08G partition 1 2.00 MiB

regulator_init_complete: PFUZE100_VGEN3: incomplete constraints, leaving on

mmcblk0boot1: mmc0:0001 SEM08G partition 2 2.00 MiB

mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 > p4

Grace

Re: question about use MFGtools

eddyliu — Wed, 26 Mar 2014 02:31:39 GMT

Hi Grace Si,

Thanks for your response. In my Log. No eMMC device is found. But I am wondering why eMMC device can not be found on my hardware board. On my hardware board eMMC device layout is same as SABRE-AI_DualLite_CPUcard which is EV kit of freescale:

On my hardware board:

On SABRE-AI_DualLite_CPUcard:

I can make sure eMMC device is working on my hardware board because QNX system can run my hardware board which use eMMC device as boot program storage space.

Re: question about use MFGtools

GraceH — Wed, 26 Mar 2014 06:43:15 GMT

Hi Eddy,

Except pin CLK, CMD, DAT0-7, you need also check whether SD3_CD and SD3_WP are correctly muxed.

static iomux_v3_cfg_t mx6dl_sabreauto_pads[] = {

/* SD3 */

MX6DL_PAD_SD3_CLK__USDHC3_CLK_50MHZ,

MX6DL_PAD_SD3_CMD__USDHC3_CMD_50MHZ,

MX6DL_PAD_SD3_DAT0__USDHC3_DAT0_50MHZ,

MX6DL_PAD_SD3_DAT1__USDHC3_DAT1_50MHZ,

MX6DL_PAD_SD3_DAT2__USDHC3_DAT2_50MHZ,

MX6DL_PAD_SD3_DAT3__USDHC3_DAT3_50MHZ,

MX6DL_PAD_SD3_DAT4__USDHC3_DAT4_50MHZ,

MX6DL_PAD_SD3_DAT5__USDHC3_DAT5_50MHZ,

MX6DL_PAD_SD3_DAT6__USDHC3_DAT6_50MHZ,

MX6DL_PAD_SD3_DAT7__USDHC3_DAT7_50MHZ,

/* SD3 VSelect */

MX6DL_PAD_GPIO_18__USDHC3_VSELECT,

/* SD3_CD and SD3_WP */

MX6DL_PAD_NANDF_CS2__GPIO_6_15,

MX6DL_PAD_SD2_DAT2__GPIO_1_13,

}

Grace

Re: question about use MFGtools

eddyliu — Thu, 27 Mar 2014 09:25:44 GMT

Hi Grace Si,

Under your reminding. I checked pins between my hardware board and freescale board except pins CLK, CMD and DAT0-7. I am notified SD3_CD and SD3_WP is not existed on my hardware board, while RST pin is on my hardware board which is not existed on freescale board. What does this two pins do? Is it necessary for eMMC or eMMC has many different hardware interface?

I check eMMC hardware interface on line which is same as my hardware board

Re: question about use MFGtools

GraceH — Fri, 28 Mar 2014 01:47:29 GMT

Hi Eddy,

If your board is not same as FSL board, you need modify mx6q_sabreauto_sd3_data in

/arch/arm/mach-mx6/board-mx6q_sabreauto.c

original:

static const struct esdhc_platform_data mx6q_sabreauto_sd3_data __initconst = {

.cd_gpio = SABREAUTO_SD3_CD,

.wp_gpio = SABREAUTO_SD3_WP,

.keep_power_at_suspend = 1,

.support_18v = 1,

.support_8bit = 1,

.delay_line = 0,

.platform_pad_change = plt_sd_pad_change,

};

change to ->

static const struct esdhc_platform_data mx6q_sabreauto_sd3_data __initconst = {

.always_present = 1,

.keep_power_at_suspend = 1,

.support_8bit = 1,

.delay_line = 0,

.cd_type = ESDHC_CD_PERMANENT,

};

Grace

Re: question about use MFGtools

eddyliu — Tue, 01 Apr 2014 11:56:05 GMT

Hi Grace，

Maybe you are right, I need to modify my code for porting linux on my board. But first I do not understand the hardware design of FSL board. The only difference between my hardware board and FSL board is the RST pin and CD pin WP pin. Why does FSL board use CD pin and WP pin instead of RST pin. Can you tell me the function of CD pin and WP pin on FSL board? I do not think it is necessary for eMMC device.

Re: question about use MFGtools

GraceH — Wed, 02 Apr 2014 02:09:58 GMT

Hi Eddy,

CD( card detect) pin and WP (write protect) pin are needed for removable SD card, but NOT needed for non-removable eMMC.

Regards,

Grace

Re: question about use MFGtools

eddyliu — Wed, 02 Apr 2014 04:35:25 GMT

Hi Grace,

As you say, CD pin and WP pin is not needed for non-removable eMMC. So no difference in hardware between my hardware board and FSL board. Why eMMC device can not be found on my hardware board which can be found on FSL board? Does FSL board not support non-removable eMMC?

Re: question about use MFGtools

GraceH — Wed, 02 Apr 2014 06:55:41 GMT

In FSL board, SD3 is configured for removable card, so CD pin and WP pin are defined in mx6q_sabreauto_sd3. If you use SD3 as non-removable, you must modify the structure of mx6q_sabreauto_sd3.

Grace

Re: Re: question about use MFGtools

eddyliu — Wed, 02 Apr 2014 09:47:00 GMT

Hi Grace,

Thanks for your patient help. I have realized it is necessary to modify code to adapt for my hardware board. I modified structure of mx6q_sabreauto_sd3 and compiled linux code:

Header 1
#make ARCH=arm CROSS_COMPILE=/opt/freescale/usr/local/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/arm-none-linux-gnueabi- distclean #make ARCH=arm CROSS_COMPILE=/opt/freescale/usr/local/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/arm-none-linux-gnueabi- imx6s_defconfig #make ARCH=arm CROSS_COMPILE=/opt/freescale/usr/local/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/arm-none-linux-gnueabi- uImage

Header 1

#make ARCH=arm CROSS_COMPILE=/opt/freescale/usr/local/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/arm-none-linux-gnueabi- distclean

#make ARCH=arm CROSS_COMPILE=/opt/freescale/usr/local/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/arm-none-linux-gnueabi- imx6s_defconfig

#make ARCH=arm CROSS_COMPILE=/opt/freescale/usr/local/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/arm-none-linux-gnueabi- uImage

I copied uImage to "Mfgtools-Rel-4.1.0_130816_MX6DL_UPDATER\Profiles\MX6DL Linux Update\OS Firmware\" and replaced the old uImage. ucl2.xml configration is as blow:

Header 1
<LIST name="i.MX6SOLO-SABRESD-SD" desc="Choose SD as media"> <CMD state="BootStrap" type="boot" body="BootStrap" file ="u-boot-mx6solo-sabresd.bin" >Loading U-boot</CMD> <CMD state="BootStrap" type="load" file="uImage" address="0x10800000" loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >Loading Kernel.</CMD> <CMD state="BootStrap" type="load" file="initramfs.cpio.gz.uboot" address="0x10C00000" loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >Loading Initramfs.</CMD> <CMD state="BootStrap" type="jump" > Jumping to OS image. </CMD> <CMD state="Updater" type="push" body="$ ls /dev/">ls -l /dev/</CMD>

Header 1

<CMD state="BootStrap" type="boot" body="BootStrap" file ="u-boot-mx6solo-sabresd.bin" >Loading U-boot</CMD>

<CMD state="BootStrap" type="load" file="uImage" address="0x10800000"

loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >Loading Kernel.</CMD>

<CMD state="BootStrap" type="load" file="initramfs.cpio.gz.uboot" address="0x10C00000"

loadSection="OTH" setSection="OTH" HasFlashHeader="FALSE" >Loading Initramfs.</CMD>

<CMD state="BootStrap" type="jump" > Jumping to OS image. </CMD>

When I downloaded uboot and uImage using MFGtools, error appeared:

Header 1
U-Boot 2009.08 (Aug 16 2013 - 15:02:51) CPU: Freescale i.MX6 family TO1.1 at 792 MHz Thermal sensor with ratio = 188 Temperature: 37 C, calibration data 0x5a34e87d mx6q pll1: 792MHz mx6q pll2: 528MHz mx6q pll3: 480MHz mx6q pll8: 50MHz ipg clock : 66000000Hz ipg per clock : 66000000Hz uart clock : 80000000Hz cspi clock : 60000000Hz ahb clock : 132000000Hz axi clock : 198000000Hz emi_slow clock: 99000000Hz ddr clock : 396000000Hz usdhc1 clock : 198000000Hz usdhc2 clock : 198000000Hz usdhc3 clock : 198000000Hz usdhc4 clock : 198000000Hz nfc clock : 24000000Hz Board: i.MX6DL/Solo-SABRESD: unknown-board Board: 0x61011 [POR ] Boot Device: MMC I2C: ready DRAM: 512 MB MMC: FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3 Using default environment In: serial Out: serial Err: serial Net: got MAC address from IIM: 00:00:00:00:00:00 FEC0 [PRIME] Hit any key to stop autoboot: 0 ## Booting kernel from Legacy Image at 10800000 ... Image Name: Linux-3.0.35-2508-g54750ff Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3584948 Bytes = 3.4 MB Load Address: 10008000 Entry Point: 10008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 10c00000 ... Image Name: uboot initramfs rootfs Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4545326 Bytes = 4.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 3.0.35-2508-g54750ff (eddy@eddy-virtual-machine) (gcc version 4.6.2 20110630 (prerelease) (Freescale MAD -- Linaro 2011.07 -- Built at 201 1/08/10 09:20) ) #1 PREEMPT Wed Apr 2 04:38:35 EDT 2014 CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: Freescale i.MX 6Quad/DualLite/Solo Sabre-SD Board Memory policy: ECC disabled, Data cache writeback CPU identified as i.MX6DL/SOLO, silicon rev 1.1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97280 Kernel command line: console=ttymxc0,115200 rdinit=/linuxrc enable_wait_mode=off nosmp PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384MB = 384MB total Memory: 373308k/373308k available, 150980k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xf4600000 - 0xffe00000 ( 184 MB) vmalloc : 0xa0800000 - 0xf2000000 (1304 MB) lowmem : 0x80000000 - 0xa0000000 ( 512 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .init : 0x80008000 - 0x80036000 ( 184 kB) .text : 0x80036000 - 0x80a30cb8 (10220 kB) .data : 0x80a32000 - 0x80a86480 ( 338 kB) .bss : 0x80a864a4 - 0x80aab438 ( 148 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:624 MXC GPIO hardware sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms Set periph_clk's parent to pll2_pfd_400M! arm_max_freq=800MHz MXC_Early serial console at MMIO 0x2020000 (options '115200') bootconsole [ttymxc0] enabled Console: colour dummy device 80x30 Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available print_constraints: dummy: NET: Registered protocol family 16 print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step. hw-breakpoint: maximum watchpoint size is 4 bytes. L310 cache controller enabled l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02050000, Cache size: 524288 B bio: create slab <bio-0> at 0 print_constraints: SPKVDD: 4200 mV print_constraints: vmmc: 3300 mV SCSI subsystem initialized spi_imx imx6q-ecspi.0: probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Freescale USB OTG Driver loaded, $Revision: 1.55 $ mc_pfuze 1-0008: recv failed!:-5,80 mc_pfuze: probe of 1-0008 failed with error -1 mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 driver probed mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 dphy version is 0x3130302a MIPI CSI2 driver module loaded Advanced Linux Sound Architecture Driver Version 1.0.24. Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized cfg80211: Calling CRDA to update world regulatory domain max17135 2-0048: PMIC MAX17135 for eInk display i2c-core: driver [max17135] using legacy suspend method i2c-core: driver [max17135] using legacy resume method Switching to clocksource mxc_timer1 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initramfs unpacking failed: junk in compressed archive Freeing initrd memory: 4436K PMU: registered new PMU device of type 0 Static Power Management for Freescale i.MX6 wait mode is disabled for i.MX6 cpaddr = a0820000 suspend_iram_base=a087c000 PM driver module loaded IMX usb wakeup probe add wake up source irq 75 IMX usb wakeup probe cpu regulator mode:ldo_enable i.MXC CPU frequency driver JFFS2 version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc. msgmni has been set to 737 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) i2c-core: driver [sii902x] using legacy suspend method i2c-core: driver [sii902x] using legacy resume method imx-sdma imx-sdma: loaded firmware 1.1 imx-sdma imx-sdma: initialized Serial: IMX driver imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX console [ttymxc0] enabled, bootconsole disabled console [ttymxc0] enabled, bootconsole disabled loop: module loaded m25p80 spi0.0: unrecognized JEDEC id ffffff vcan: Virtual CAN interface driver CAN device driver interface flexcan netdevice driver FEC Ethernet Driver fec_enet_mii_bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected add wake up source irq 72 fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200 fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ARC USBOTG Device Controller driver (1 August 2005) mousedev: PS/2 mouse device common for all mice input: gpio-keys as /devices/platform/gpio-keys/input/input0 egalax_ts 1-0004: egalax_ts: failed to read firmware version egalax_ts: probe of 1-0004 failed with error -5 egalax_ts 2-0004: egalax_ts: failed to read firmware version egalax_ts: probe of 2-0004 failed with error -5 elan - Read Hello Packet Failed elan-touch: probe of 2-0010 failed with error -22 i2c-core: driver [isl29023] using legacy suspend method i2c-core: driver [isl29023] using legacy resume method snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0 i2c /dev entries driver Linux video capture interface: v2.00 Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.0.35-2508-g54750ff #1) PC is at csi_mclk_enable+0x18/0x28 LR is at clk_enable+0x60/0xa0 pc : [<80344a88>] lr : [<8005caec>] psr: 60000013 sp : 94031ea8 ip : 00000000 fp : 00000000 r10: 9427d000 r9 : 8034758c r8 : 9427d020 r7 : 00000000 r6 : 9427d000 r5 : 00000001 r4 : 80aa2fbc r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 10004059 DAC: 00000015 Process swapper (pid: 1, stack limit = 0x940302e8) Stack: (0x94031ea8 to 0x94032000) 1ea0: 00000001 80344ac8 8005a85c 80aa3028 80a48e34 80347714 1ec0: 00000000 00000000 9427d020 804f2778 804f2760 804f2778 9427d004 8031fbd0 1ee0: 9427d020 80aa0b88 9427d054 00000000 80a71d0c 00000000 80022f2c 80277f34 1f00: 9427d020 80a71d0c 9427d054 00000000 00000000 802780cc 80a71d0c 00000000 1f20: 80278040 80277154 940bcc38 94111c90 80a71d0c 80a6e6c0 9430e420 80277908 1f40: 809c58e0 80a71d0c 94030000 80a71d0c 94030000 8003c670 00000000 00000000 1f60: 80022f2c 802785ac 80a71ce4 94030000 8003c670 00000000 00000000 80321830 1f80: 00000000 80a864c0 94030000 80022f3c 80a864c0 8003635c 00000000 940564e0 1fa0: 8009e878 80022f2c 80a58078 8009e8a8 000001df 8003c670 00000013 37340000 1fc0: 00000039 8002b6f0 8002b84c 8003c670 00000013 00000000 00000000 00000000 1fe0: 00000000 800089b4 00000000 00000000 80008930 8003c670 6ebdf65b f33fd9dd [<80344a88>] (csi_mclk_enable+0x18/0x28) from [<80344ac8>] (csi_enable_mclk+0x14/0x54) [<80344ac8>] (csi_enable_mclk+0x14/0x54) from [<80347714>] (ov5640_probe+0x188/0x2f0) [<80347714>] (ov5640_probe+0x188/0x2f0) from [<8031fbd0>] (i2c_device_probe+0xc0/0xfc) [<8031fbd0>] (i2c_device_probe+0xc0/0xfc) from [<80277f34>] (driver_probe_device+0x90/0x19c) [<80277f34>] (driver_probe_device+0x90/0x19c) from [<802780cc>] (__driver_attach+0x8c/0x90) [<802780cc>] (__driver_attach+0x8c/0x90) from [<80277154>] (bus_for_each_dev+0x5c/0x88) [<80277154>] (bus_for_each_dev+0x5c/0x88) from [<80277908>] (bus_add_driver+0x17c/0x244) [<80277908>] (bus_add_driver+0x17c/0x244) from [<802785ac>] (driver_register+0x78/0x13c) [<802785ac>] (driver_register+0x78/0x13c) from [<80321830>] (i2c_register_driver+0x2c/0xb4) [<80321830>] (i2c_register_driver+0x2c/0xb4) from [<80022f3c>] (ov5640_init+0x10/0x40) [<80022f3c>] (ov5640_init+0x10/0x40) from [<8003635c>] (do_one_initcall+0x34/0x174) [<8003635c>] (do_one_initcall+0x34/0x174) from [<800089b4>] (kernel_init+0x84/0x124) [<800089b4>] (kernel_init+0x84/0x124) from [<8003c670>] (kernel_thread_exit+0x0/0x8) Code: e34840aa e2840008 ebf46001 e5943000 (e5932000) ---[ end trace c0aaf267c1d7dce3 ]--- Kernel panic - not syncing: Attempted to kill init! [<80041518>] (unwind_backtrace+0x0/0xf8) from [<804c1f04>] (panic+0x74/0x188) [<804c1f04>] (panic+0x74/0x188) from [<8006bca0>] (do_exit+0x668/0x6ec) [<8006bca0>] (do_exit+0x668/0x6ec) from [<8003f1ec>] (die+0x234/0x2a8) [<8003f1ec>] (die+0x234/0x2a8) from [<804c1e14>] (__do_kernel_fault.part.5+0x54/0x74) [<804c1e14>] (__do_kernel_fault.part.5+0x54/0x74) from [<80044f70>] (do_page_fault+0x2b4/0x31c) [<80044f70>] (do_page_fault+0x2b4/0x31c) from [<800361a0>] (do_DataAbort+0x34/0x9c) [<800361a0>] (do_DataAbort+0x34/0x9c) from [<8003b790>] (__dabt_svc+0x70/0xa0) Exception stack(0x94031e60 to 0x94031ea8) 1e60: 00000000 00000001 00000000 00000000 80aa2fbc 00000001 9427d000 00000000 1e80: 9427d020 8034758c 9427d000 00000000 00000000 94031ea8 8005caec 80344a88 1ea0: 60000013 ffffffff [<8003b790>] (__dabt_svc+0x70/0xa0) from [<80344a88>] (csi_mclk_enable+0x18/0x28) [<80344a88>] (csi_mclk_enable+0x18/0x28) from [<80344ac8>] (csi_enable_mclk+0x14/0x54) [<80344ac8>] (csi_enable_mclk+0x14/0x54) from [<80347714>] (ov5640_probe+0x188/0x2f0) [<80347714>] (ov5640_probe+0x188/0x2f0) from [<8031fbd0>] (i2c_device_probe+0xc0/0xfc) [<8031fbd0>] (i2c_device_probe+0xc0/0xfc) from [<80277f34>] (driver_probe_device+0x90/0x19c) [<80277f34>] (driver_probe_device+0x90/0x19c) from [<802780cc>] (__driver_attach+0x8c/0x90) [<802780cc>] (__driver_attach+0x8c/0x90) from [<80277154>] (bus_for_each_dev+0x5c/0x88) [<80277154>] (bus_for_each_dev+0x5c/0x88) from [<80277908>] (bus_add_driver+0x17c/0x244) [<80277908>] (bus_add_driver+0x17c/0x244) from [<802785ac>] (driver_register+0x78/0x13c) [<802785ac>] (driver_register+0x78/0x13c) from [<80321830>] (i2c_register_driver+0x2c/0xb4) [<80321830>] (i2c_register_driver+0x2c/0xb4) from [<80022f3c>] (ov5640_init+0x10/0x40) [<80022f3c>] (ov5640_init+0x10/0x40) from [<8003635c>] (do_one_initcall+0x34/0x174) [<8003635c>] (do_one_initcall+0x34/0x174) from [<800089b4>] (kernel_init+0x84/0x124) [<800089b4>] (kernel_init+0x84/0x124) from [<8003c670>] (kernel_thread_exit+0x0/0x8)

Header 1

U-Boot 2009.08 (Aug 16 2013 - 15:02:51)

CPU: Freescale i.MX6 family TO1.1 at 792 MHz

Thermal sensor with ratio = 188

Temperature: 37 C, calibration data 0x5a34e87d

mx6q pll1: 792MHz

mx6q pll2: 528MHz

mx6q pll3: 480MHz

mx6q pll8: 50MHz

ipg clock : 66000000Hz

ipg per clock : 66000000Hz

uart clock : 80000000Hz

cspi clock : 60000000Hz

ahb clock : 132000000Hz

axi clock : 198000000Hz

emi_slow clock: 99000000Hz

ddr clock : 396000000Hz

usdhc1 clock : 198000000Hz

usdhc2 clock : 198000000Hz

usdhc3 clock : 198000000Hz

usdhc4 clock : 198000000Hz

nfc clock : 24000000Hz

Board: i.MX6DL/Solo-SABRESD: unknown-board Board: 0x61011 [POR ]

Boot Device: MMC

I2C: ready

DRAM: 512 MB

MMC: FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3

Using default environment

In: serial

Out: serial

Err: serial

Net: got MAC address from IIM: 00:00:00:00:00:00

FEC0 [PRIME]

Hit any key to stop autoboot: 0

## Booting kernel from Legacy Image at 10800000 ...

Image Name: Linux-3.0.35-2508-g54750ff

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 3584948 Bytes = 3.4 MB

Load Address: 10008000

Entry Point: 10008000

Verifying Checksum ... OK

## Loading init Ramdisk from Legacy Image at 10c00000 ...

Image Name: uboot initramfs rootfs

Image Type: ARM Linux RAMDisk Image (gzip compressed)

Data Size: 4545326 Bytes = 4.3 MB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Loading Kernel Image ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Linux version 3.0.35-2508-g54750ff (eddy@eddy-virtual-machine) (gcc version 4.6.2 20110630 (prerelease) (Freescale MAD -- Linaro 2011.07 -- Built at 201

1/08/10 09:20) ) #1 PREEMPT Wed Apr 2 04:38:35 EDT 2014

CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d

CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: Freescale i.MX 6Quad/DualLite/Solo Sabre-SD Board

Memory policy: ECC disabled, Data cache writeback

CPU identified as i.MX6DL/SOLO, silicon rev 1.1

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97280

Kernel command line: console=ttymxc0,115200 rdinit=/linuxrc enable_wait_mode=off nosmp

PID hash table entries: 2048 (order: 1, 8192 bytes)

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

Memory: 384MB = 384MB total

Memory: 373308k/373308k available, 150980k reserved, 0K highmem

Virtual kernel memory layout:

vector : 0xffff0000 - 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

DMA : 0xf4600000 - 0xffe00000 ( 184 MB)

vmalloc : 0xa0800000 - 0xf2000000 (1304 MB)

lowmem : 0x80000000 - 0xa0000000 ( 512 MB)

pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)

modules : 0x7f000000 - 0x7fe00000 ( 14 MB)

.init : 0x80008000 - 0x80036000 ( 184 kB)

.text : 0x80036000 - 0x80a30cb8 (10220 kB)

.data : 0x80a32000 - 0x80a86480 ( 338 kB)

.bss : 0x80a864a4 - 0x80aab438 ( 148 kB)

SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

Preemptible hierarchical RCU implementation.

NR_IRQS:624

MXC GPIO hardware

sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms

Set periph_clk's parent to pll2_pfd_400M!

arm_max_freq=800MHz

MXC_Early serial console at MMIO 0x2020000 (options '115200')

bootconsole [ttymxc0] enabled

Console: colour dummy device 80x30

Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available

print_constraints: dummy:

NET: Registered protocol family 16

print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal

print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal

print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal

print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal

print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal

print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal

hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.

hw-breakpoint: maximum watchpoint size is 4 bytes.

L310 cache controller enabled

l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02050000, Cache size: 524288 B

bio: create slab <bio-0> at 0

print_constraints: SPKVDD: 4200 mV

print_constraints: vmmc: 3300 mV

SCSI subsystem initialized

spi_imx imx6q-ecspi.0: probed

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Freescale USB OTG Driver loaded, $Revision: 1.55 $

mc_pfuze 1-0008: recv failed!:-5,80

mc_pfuze: probe of 1-0008 failed with error -1

mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 driver probed

mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 dphy version is 0x3130302a

MIPI CSI2 driver module loaded

Advanced Linux Sound Architecture Driver Version 1.0.24.

Bluetooth: Core ver 2.16

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO socket layer initialized

cfg80211: Calling CRDA to update world regulatory domain

max17135 2-0048: PMIC MAX17135 for eInk display

i2c-core: driver [max17135] using legacy suspend method

i2c-core: driver [max17135] using legacy resume method

Switching to clocksource mxc_timer1

NET: Registered protocol family 2

IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

TCP established hash table entries: 16384 (order: 5, 131072 bytes)

TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

TCP: Hash tables configured (established 16384 bind 16384)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

Unpacking initramfs...

Initramfs unpacking failed: junk in compressed archive

Freeing initrd memory: 4436K

PMU: registered new PMU device of type 0

Static Power Management for Freescale i.MX6

wait mode is disabled for i.MX6

cpaddr = a0820000 suspend_iram_base=a087c000

PM driver module loaded

IMX usb wakeup probe

add wake up source irq 75

IMX usb wakeup probe

cpu regulator mode:ldo_enable

i.MXC CPU frequency driver

JFFS2 version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc.

msgmni has been set to 737

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

i2c-core: driver [sii902x] using legacy suspend method

i2c-core: driver [sii902x] using legacy resume method

imx-sdma imx-sdma: loaded firmware 1.1

imx-sdma imx-sdma: initialized

Serial: IMX driver

imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX

imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX

console [ttymxc0] enabled, bootconsole disabled

loop: module loaded

m25p80 spi0.0: unrecognized JEDEC id ffffff

vcan: Virtual CAN interface driver

CAN device driver interface

flexcan netdevice driver

FEC Ethernet Driver

fec_enet_mii_bus: probed

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller

fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1

fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000

fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

add wake up source irq 72

fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller

fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2

fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200

fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

ARC USBOTG Device Controller driver (1 August 2005)

mousedev: PS/2 mouse device common for all mice

input: gpio-keys as /devices/platform/gpio-keys/input/input0

egalax_ts 1-0004: egalax_ts: failed to read firmware version

egalax_ts: probe of 1-0004 failed with error -5

egalax_ts 2-0004: egalax_ts: failed to read firmware version

egalax_ts: probe of 2-0004 failed with error -5

elan - Read Hello Packet Failed

elan-touch: probe of 2-0010 failed with error -22

i2c-core: driver [isl29023] using legacy suspend method

i2c-core: driver [isl29023] using legacy resume method

snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0

i2c /dev entries driver

Linux video capture interface: v2.00

Unable to handle kernel NULL pointer dereference at virtual address 00000000

pgd = 80004000

[00000000] *pgd=00000000

Internal error: Oops: 5 [#1] PREEMPT

Modules linked in:

CPU: 0 Not tainted (3.0.35-2508-g54750ff #1)

PC is at csi_mclk_enable+0x18/0x28

LR is at clk_enable+0x60/0xa0

pc : [<80344a88>] lr : [<8005caec>] psr: 60000013

sp : 94031ea8 ip : 00000000 fp : 00000000

r10: 9427d000 r9 : 8034758c r8 : 9427d020

r7 : 00000000 r6 : 9427d000 r5 : 00000001 r4 : 80aa2fbc

r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : 00000000

Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel

Control: 10c53c7d Table: 10004059 DAC: 00000015

Process swapper (pid: 1, stack limit = 0x940302e8)

Stack: (0x94031ea8 to 0x94032000)

1ea0: 00000001 80344ac8 8005a85c 80aa3028 80a48e34 80347714

1ec0: 00000000 00000000 9427d020 804f2778 804f2760 804f2778 9427d004 8031fbd0

1ee0: 9427d020 80aa0b88 9427d054 00000000 80a71d0c 00000000 80022f2c 80277f34

1f00: 9427d020 80a71d0c 9427d054 00000000 00000000 802780cc 80a71d0c 00000000

1f20: 80278040 80277154 940bcc38 94111c90 80a71d0c 80a6e6c0 9430e420 80277908

1f40: 809c58e0 80a71d0c 94030000 80a71d0c 94030000 8003c670 00000000 00000000

1f60: 80022f2c 802785ac 80a71ce4 94030000 8003c670 00000000 00000000 80321830

1f80: 00000000 80a864c0 94030000 80022f3c 80a864c0 8003635c 00000000 940564e0

1fa0: 8009e878 80022f2c 80a58078 8009e8a8 000001df 8003c670 00000013 37340000

1fc0: 00000039 8002b6f0 8002b84c 8003c670 00000013 00000000 00000000 00000000

1fe0: 00000000 800089b4 00000000 00000000 80008930 8003c670 6ebdf65b f33fd9dd

[<80344a88>] (csi_mclk_enable+0x18/0x28) from [<80344ac8>] (csi_enable_mclk+0x14/0x54)

[<80344ac8>] (csi_enable_mclk+0x14/0x54) from [<80347714>] (ov5640_probe+0x188/0x2f0)

[<80347714>] (ov5640_probe+0x188/0x2f0) from [<8031fbd0>] (i2c_device_probe+0xc0/0xfc)

[<8031fbd0>] (i2c_device_probe+0xc0/0xfc) from [<80277f34>] (driver_probe_device+0x90/0x19c)

[<80277f34>] (driver_probe_device+0x90/0x19c) from [<802780cc>] (__driver_attach+0x8c/0x90)

[<802780cc>] (__driver_attach+0x8c/0x90) from [<80277154>] (bus_for_each_dev+0x5c/0x88)

[<80277154>] (bus_for_each_dev+0x5c/0x88) from [<80277908>] (bus_add_driver+0x17c/0x244)

[<80277908>] (bus_add_driver+0x17c/0x244) from [<802785ac>] (driver_register+0x78/0x13c)

[<802785ac>] (driver_register+0x78/0x13c) from [<80321830>] (i2c_register_driver+0x2c/0xb4)

[<80321830>] (i2c_register_driver+0x2c/0xb4) from [<80022f3c>] (ov5640_init+0x10/0x40)

[<80022f3c>] (ov5640_init+0x10/0x40) from [<8003635c>] (do_one_initcall+0x34/0x174)

[<8003635c>] (do_one_initcall+0x34/0x174) from [<800089b4>] (kernel_init+0x84/0x124)

[<800089b4>] (kernel_init+0x84/0x124) from [<8003c670>] (kernel_thread_exit+0x0/0x8)

Code: e34840aa e2840008 ebf46001 e5943000 (e5932000)

---[ end trace c0aaf267c1d7dce3 ]---

Kernel panic - not syncing: Attempted to kill init!

[<80041518>] (unwind_backtrace+0x0/0xf8) from [<804c1f04>] (panic+0x74/0x188)

[<804c1f04>] (panic+0x74/0x188) from [<8006bca0>] (do_exit+0x668/0x6ec)

[<8006bca0>] (do_exit+0x668/0x6ec) from [<8003f1ec>] (die+0x234/0x2a8)

[<8003f1ec>] (die+0x234/0x2a8) from [<804c1e14>] (__do_kernel_fault.part.5+0x54/0x74)

[<804c1e14>] (__do_kernel_fault.part.5+0x54/0x74) from [<80044f70>] (do_page_fault+0x2b4/0x31c)

[<80044f70>] (do_page_fault+0x2b4/0x31c) from [<800361a0>] (do_DataAbort+0x34/0x9c)

[<800361a0>] (do_DataAbort+0x34/0x9c) from [<8003b790>] (__dabt_svc+0x70/0xa0)

Exception stack(0x94031e60 to 0x94031ea8)

1e60: 00000000 00000001 00000000 00000000 80aa2fbc 00000001 9427d000 00000000

1e80: 9427d020 8034758c 9427d000 00000000 00000000 94031ea8 8005caec 80344a88

1ea0: 60000013 ffffffff

[<8003b790>] (__dabt_svc+0x70/0xa0) from [<80344a88>] (csi_mclk_enable+0x18/0x28)