topic Re: how to set bootconsole on imx6 board in i.MX Processors

how to set bootconsole on imx6 board

tonnywong — Fri, 14 Jun 2013 07:24:51 GMT

Hi,

I use i.Mx 6Quad Sabrelite board to develop android systems, it works well except the uart console.

When the android system(4.04,kernel 3.0.15) boots up, the console always stops at:

/********************************************************/

console [ttymxc0] enabled, bootconsole disabled

/********************************************************/

and then it prints nothing, but the android system is running well.

So how can I set the bootconsole enable to get the entire boot log from system, Can anybody know this problem?

Re: how to set bootconsole on imx6 board

LeonardoSandova — Fri, 14 Jun 2013 15:03:00 GMT

FYI, there is a need Android version (4.2.2), you may try a demo image and see if issue is still present. Check board's page on Freescale.com

Leo

Re: how to set bootconsole on imx6 board

tonnywong — Mon, 17 Jun 2013 01:02:57 GMT

Thank you .

But the android 4.2.2 source code and image of sabrelite board are not included in the official download page :

i.MX 6 Software Updates and Releases

SABRE Platform for Smart Devices

SABRE for Automotive Infotainment

i.MX 6SoloLite Evaluation Kit

i.MX 6 Series Software and Development Tool Resources Product Summary Page</title><meta name="Title" …

Is there any other way to get the android 4.2.2 source or image for the sabrelite board?

Re: how to set bootconsole on imx6 board

LeonardoSandova — Mon, 17 Jun 2013 17:26:58 GMT

No idea. BTW, For Android (and Linux), you should use the images provided by BD http://boundarydevices.com/imx6-builds/

Re: how to set bootconsole on imx6 board

louiskoziarz — Tue, 18 Jun 2013 17:12:55 GMT

If you get that much and then the console goes silent, that means the kernel has picked up the console configuration data from the u-boot command line and switched serial ports. Stop your bootloader and do a 'printenv' and look for the bootargs command. You should see something like

bootargs=console=ttymxc1,115200... etc etc...

When the kernel sees that in bootargs, it will switch the console to ttymxc1 once the 'early' setup phase is complete and the UARTs are being initialized in the official driver manner.

Start your examination here and see what you find. Remember that ttymxc0 is UART1 on the IMX6, ttymxc1 is UART2, etc etc.

Re: how to set bootconsole on imx6 board

EricNelson — Tue, 18 Jun 2013 17:25:09 GMT

Hi Tonny,

The sources are available. See this post for details.

http://boundarydevices.com/jellybean-imx6/

Re: how to set bootconsole on imx6 board

EricNelson — Tue, 18 Jun 2013 17:25:59 GMT

Also note that ttymxc1 is the console on a SABRE Lite board. That seems to be the issue you're having.

Re: how to set bootconsole on imx6 board

tonnywong — Tue, 25 Jun 2013 01:33:02 GMT

Thanks a lot, I change the console=ttymxc1 from the u-boot, and it works fine, the former bootargs was: console=ttymxc0...

topic Re: how to set bootconsole on imx6 board in i.MX Processors

how to set bootconsole on imx6 board

Re: how to set bootconsole on imx6 board

Re: how to set bootconsole on imx6 board

i.MX 6 Software Updates and Releases

SABRE Board for Smart Devices

SABRE Platform for Smart Devices

SABRE for Automotive Infotainment

i.MX 6SoloLite Evaluation Kit

Re: how to set bootconsole on imx6 board

Re: how to set bootconsole on imx6 board

Re: how to set bootconsole on imx6 board

Re: how to set bootconsole on imx6 board

Re: how to set bootconsole on imx6 board