topic Re: Porting Minigui to imx6 linux platform in i.MX Processors

Porting Minigui to imx6 linux platform

huangjacky — Thu, 01 Nov 2012 07:56:57 GMT

Dear All:

I m planing to porting Minigui to imx6 linux platform.

There are three chief package for the Minigui:

libminigui-gpl-3.0.12.tar.gz

mg-samples-3.0.12.tar.gz

minigui-res-be-3.0.12.tar.gz

Is this enough? any package more?

I wanna compile the minigui which is output data to framebuffer directly(no qvfb, no gvfb),

actually , I have compile the package as above, but when I run the demo program mginit

I got the error message:

NEWGAL>FBCON: Couldn't initialize PCI system

Segmentation fault

Am I set the wrong variable for the configure before make?

Should I modify the MiniGUI.cfg file?

Pls get me some suggestions about this error.

Thanks advance!

Re: Porting Minigui to imx6 linux platform

YixingKong — Mon, 17 Feb 2014 06:36:08 GMT

Jacky

We are sorry for getting back to you so late. Are you still stuck with the issue? If you have somehow to resolved the issue, can we close the discussion? If you still need Freescale help, please feel free to contact us.

Thanks,

Yixing

Re: Porting Minigui to imx6 linux platform

YixingKong — Tue, 25 Feb 2014 03:00:29 GMT

Jacky

We have not got your response yet and will close the diacussion in 3 days. If you still need help, please feel free to

reply with an update to this discussion.
Thanks,
Yixing

Re: Porting Minigui to imx6 linux platform

YixingKong — Mon, 03 Mar 2014 07:29:49 GMT

Jacky

This discussion is closed since no activity. If you still need help, please feel free to reply with an update to this discussion, or create another discussion.

Thanks,

Yixing