topic Nothing visible on VGA after booting WEC7 image on QSB START-R board in i.MX Processors https://community.nxp.com/t5/i-MX-Processors/Nothing-visible-on-VGA-after-booting-WEC7-image-on-QSB-START-R/m-p/289146#M34642 <HTML><HEAD></HEAD><BODY><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: #ffffff;"><SPAN style="font-style: inherit; font-family: inherit; color: black;">I downloaded the </SPAN><SPAN lang="EN-GB" style="font-style: inherit; font-family: inherit; color: black;">image of the WEC7 from adeneo link and tried to boot the QSB START-R board by following the steps given in “</SPAN><SPAN style="font-style: inherit; font-size: 9.5pt; font-family: Arial, sans-serif; color: #558ed5;">FREESCALE_iMX53_QSB_WEC7_user_guide_V131.pdf</SPAN><SPAN style="font-style: inherit; font-size: 9.5pt; font-family: Arial, sans-serif; color: black;">”.</SPAN></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;"><SPAN style="font-style: inherit; font-size: 9.5pt; font-family: Arial, sans-serif; color: black;">I have tried to boot the Start-R board by image "........\iMX53QSB_WEC7_BIN_V131\image\START-R\VGAPanel" by using uSD card by using following commands</SPAN></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;"></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;">&nbsp;&nbsp;&nbsp; <SPAN style="font-style: inherit; font-size: 13pt; font-family: Arial, sans-serif; color: black;">cfimager -f D:\UPPSALA\WIN_BSP\iMX53QSB_WEC7_BIN_V131\image\START-R\VGAPanel\eboot.nb0 -d H -imx53</SPAN></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;"><SPAN style="font-style: inherit; font-size: 13pt; font-family: Arial, sans-serif; color: black;">cfimager -f D:\UPPSALA\WIN_BSP\iMX53QSB_WEC7_BIN_V131\image\START-R\VGAPanel\nk.nb0 -d H -imx53 “</SPAN></P><P></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;"><SPAN style="font-style: inherit; font-size: 9.5pt; font-family: Arial, sans-serif; color: black;">After this command if i insert uSD card in START-R board by connecting the power cable and VGA cable, nothing is visible on VGA.</SPAN></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;"><SPAN style="font-style: inherit; font-size: 9.5pt; font-family: Arial, sans-serif; color: black;"><BR /></SPAN></P></BODY></HTML> Mon, 29 Apr 2013 05:39:12 GMT surjitkumar 2013-04-29T05:39:12Z Nothing visible on VGA after booting WEC7 image on QSB START-R board https://community.nxp.com/t5/i-MX-Processors/Nothing-visible-on-VGA-after-booting-WEC7-image-on-QSB-START-R/m-p/289146#M34642 <HTML><HEAD></HEAD><BODY><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: #ffffff;"><SPAN style="font-style: inherit; font-family: inherit; color: black;">I downloaded the </SPAN><SPAN lang="EN-GB" style="font-style: inherit; font-family: inherit; color: black;">image of the WEC7 from adeneo link and tried to boot the QSB START-R board by following the steps given in “</SPAN><SPAN style="font-style: inherit; font-size: 9.5pt; font-family: Arial, sans-serif; color: #558ed5;">FREESCALE_iMX53_QSB_WEC7_user_guide_V131.pdf</SPAN><SPAN style="font-style: inherit; font-size: 9.5pt; font-family: Arial, sans-serif; color: black;">”.</SPAN></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;"><SPAN style="font-style: inherit; font-size: 9.5pt; font-family: Arial, sans-serif; color: black;">I have tried to boot the Start-R board by image "........\iMX53QSB_WEC7_BIN_V131\image\START-R\VGAPanel" by using uSD card by using following commands</SPAN></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;"></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;">&nbsp;&nbsp;&nbsp; <SPAN style="font-style: inherit; font-size: 13pt; font-family: Arial, sans-serif; color: black;">cfimager -f D:\UPPSALA\WIN_BSP\iMX53QSB_WEC7_BIN_V131\image\START-R\VGAPanel\eboot.nb0 -d H -imx53</SPAN></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;"><SPAN style="font-style: inherit; font-size: 13pt; font-family: Arial, sans-serif; color: black;">cfimager -f D:\UPPSALA\WIN_BSP\iMX53QSB_WEC7_BIN_V131\image\START-R\VGAPanel\nk.nb0 -d H -imx53 “</SPAN></P><P></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;"><SPAN style="font-style: inherit; font-size: 9.5pt; font-family: Arial, sans-serif; color: black;">After this command if i insert uSD card in START-R board by connecting the power cable and VGA cable, nothing is visible on VGA.</SPAN></P><P style="font-family: 'Helvetica Neue', Helvetica, Arial, 'Lucida Grande', sans-serif; background-color: white;"><SPAN style="font-style: inherit; font-size: 9.5pt; font-family: Arial, sans-serif; color: black;"><BR /></SPAN></P></BODY></HTML> Mon, 29 Apr 2013 05:39:12 GMT https://community.nxp.com/t5/i-MX-Processors/Nothing-visible-on-VGA-after-booting-WEC7-image-on-QSB-START-R/m-p/289146#M34642 surjitkumar 2013-04-29T05:39:12Z Re: Nothing visible on VGA after booting WEC7 image on QSB START-R board https://community.nxp.com/t5/i-MX-Processors/Nothing-visible-on-VGA-after-booting-WEC7-image-on-QSB-START-R/m-p/289147#M34643 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>We are also having the exact same issue - everything seems to be starting up OK via the terminal output, but no VGA video output. We are using Freescale MCIMX53-START-R Rev D0. We do not have any touchscreen LCD card. We are using the HDMI daughter board, but we are looking at the VGA output. </P><P></P><P>Many thanks,</P><P>Martin Coster</P><P><span class="lia-inline-image-display-wrapper"><img src="https://community.nxp.com/t5/image/serverpage/image-id/40051i3EB45883A717921E/image-size/large?v=v2&amp;px=999" title="nkcfimager.jpg" alt="nkcfimager.jpg" /></span></P><P><span class="lia-inline-image-display-wrapper"><img src="https://community.nxp.com/t5/image/serverpage/image-id/40052iBA6031677440C812/image-size/large?v=v2&amp;px=999" title="ebootCfimager.jpg" alt="ebootCfimager.jpg" /></span></P><P>INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb</P><P>BSP Clock Configuration:</P><P>&nbsp;&nbsp;&nbsp; OSC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; PLL1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 800000000 Hz</P><P>&nbsp;&nbsp;&nbsp; PLL2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 600000000 Hz</P><P>&nbsp;&nbsp;&nbsp; PLL3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 400000000 Hz</P><P>&nbsp;&nbsp;&nbsp; PLL4&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 595000000 Hz</P><P>&nbsp;&nbsp;&nbsp; LP_APM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ARM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 800000000 Hz</P><P>&nbsp;&nbsp;&nbsp; AXI_A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 300000000 Hz</P><P>&nbsp;&nbsp;&nbsp; AXI_B&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; EMI_SLOW&nbsp;&nbsp;&nbsp; =&nbsp; 120000000 Hz</P><P>&nbsp;&nbsp;&nbsp; AHB&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 120000000 Hz</P><P>&nbsp;&nbsp;&nbsp; IPG&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 60000000 Hz</P><P>&nbsp;&nbsp;&nbsp; PERCLK&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 8000000 Hz</P><P>&nbsp;&nbsp;&nbsp; CKIL_SYNC&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 32768 Hz</P><P>&nbsp;&nbsp;&nbsp; DDR&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 300000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ARM_AXI&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; IPU_HSP&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; VPU_AXI&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; GPU&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; GPU2D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; DEBUG_APB&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ENFC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 30000000 Hz</P><P>&nbsp;&nbsp;&nbsp; USBOH3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 66666666 Hz</P><P>&nbsp;&nbsp;&nbsp; ESDHC1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 100000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ESDHC2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 100000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ESDHC3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 100000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ESDHC4&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 100000000 Hz</P><P>&nbsp;&nbsp;&nbsp; UART&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 6000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 6000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 6000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI_EXT1&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI_EXT2&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 19047619 Hz</P><P>&nbsp;&nbsp;&nbsp; USB_PHY&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; TVE_216_54&nbsp; =&nbsp; 297500000 Hz</P><P>&nbsp;&nbsp;&nbsp; DI0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 50000000 Hz</P><P>&nbsp;&nbsp;&nbsp; DI1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 297500000 Hz</P><P>&nbsp;&nbsp;&nbsp; VPU_RCLK&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI_LP_APM&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SPDIF_XTAL&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; LDB_DIO&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 595000000 Hz</P><P>&nbsp;&nbsp;&nbsp; LDB_DI1&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 595000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SPDIF0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 1142857 Hz</P><P>&nbsp;&nbsp;&nbsp; ESAI&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 3000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ESAI_HCKR&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 Hz</P><P>&nbsp;&nbsp;&nbsp; ESAI_HCKT&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 Hz</P><P>&nbsp;&nbsp;&nbsp; CAN&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 60000000 Hz</P><P>&nbsp;&nbsp;&nbsp; FIRI&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; CSI_MCLK1&nbsp;&nbsp; =&nbsp;&nbsp; 25000000 Hz</P><P>&nbsp;&nbsp;&nbsp; CSI_MCLK2&nbsp;&nbsp; =&nbsp;&nbsp; 25000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ECSPI&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 66666666 Hz</P><P>&nbsp;&nbsp;&nbsp; LPSR&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 Hz</P><P>&nbsp;&nbsp;&nbsp; PGC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 7500000 Hz</P><P>&nbsp;&nbsp;&nbsp; ASRC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 59500000 Hz</P><P>&nbsp;&nbsp;&nbsp; IEEE_CEMX&nbsp;&nbsp; =&nbsp;&nbsp; 40000000 Hz</P><P>&nbsp;&nbsp;&nbsp; CKIH&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 22579200 Hz</P><P>&nbsp;&nbsp;&nbsp; CKIH2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 Hz</P><P></P><P></P><P>Microsoft Windows CE Bootloader Common Library Version 1.4 Built May 22 2013 18:39:43</P><P>OALMc34708PmicI2cInit: Trying to init PMIC I2C Interface</P><P>OALPmicInit: Trying to init I2C Interface</P><P>MC34708 Version code : 14</P><P>INFO: BoardID = 0xc03.</P><P>INFO: EVK RevA board is not detected, switch ddr clock to 400MHz.</P><P>INFO: Increasing CPU clock to 1.0 GHz.</P><P>Microsoft Windows CE Ethernet Bootloader 1.31 for MX53 EVK (May 23 2013 16:59:42)</P><P>Get The name for the external PHY is LAN8720</P><P>INFO: SBMR = 0x10c63d45.</P><P>INFO:&nbsp; Bootloader launched from SD.</P><P>ESDHC[1] is being activated...</P><P>SD High Density card</P><P>SD: Switched to 4 bit mode</P><P>INFO: Initialized SD Card</P><P>ATA device is not present 0x0</P><P>WARNING: OEMPlatformInit: Failed to initialize ATA device.</P><P>NAND ID is 0x3f3f3f3f</P><P>NAND ID read out is 0x3f3f3f3f, doesn't meet 0xd52c which is expected.</P><P>Failed to initialize NandFmd.</P><P>WARNING: OEMPlatformInit: Failed to initialize NAND flash device.</P><P>SPIFMD_Init: Manufacturer ID = 0x0 </P><P>SPIFMD_Init: Manufacturer ID is not supported yet</P><P>WARNING: OEMPlatformInit: Failed to initialize SPI device.</P><P>INFO: Loading boot configuration from SDHC</P><P>INFO: Successfully loaded boot configuration from SDHC</P><P>System ready!</P><P>Preparing for download...</P><P></P><P></P><P>Press [ENTER] to launch image stored in SD/MMC or [SPACE] to cancel.</P><P></P><P></P><P>Initiating image launch in 3 seconds. 2 seconds. 1 seconds. 0 seconds. </P><P>Launching flash image&nbsp; ... </P><P>-BLMenu .</P><P>INFO: Using device name: 'MX539730'INFO: Reading NK image to SDHC (please wait)...</P><P>INFO: Copying NK image to RAM address 0xa0200000</P><P></P><P></P><P>INFO: Read is 1% complete</P><P>INFO: Read is 2% complete</P><P>INFO: Read is 3% complete</P><P>INFO: Read is 4% complete</P><P>INFO: Read is 5% complete</P><P>INFO: Read is 6% complete</P><P>INFO: Read is 7% complete</P><P>INFO: Read is 8% complete</P><P>INFO: Read is 9% complete</P><P>INFO: Read is 10% complete</P><P>INFO: Read is 11% complete</P><P>INFO: Read is 12% complete</P><P>INFO: Read is 13% complete</P><P>INFO: Read is 14% complete</P><P>INFO: Read is 15% complete</P><P>INFO: Read is 16% complete</P><P>INFO: Read is 17% complete</P><P>INFO: Read is 18% complete</P><P>INFO: Read is 19% complete</P><P>INFO: Read is 20% complete</P><P>INFO: Read is 21% complete</P><P>INFO: Read is 22% complete</P><P>INFO: Read is 23% complete</P><P>INFO: Read is 24% complete</P><P>INFO: Read is 25% complete</P><P>INFO: Read is 26% complete</P><P>INFO: Read is 27% complete</P><P>INFO: Read is 28% complete</P><P>INFO: Read is 29% complete</P><P>INFO: Read is 30% complete</P><P>INFO: Read is 31% complete</P><P>INFO: Read is 32% complete</P><P>INFO: Read is 33% complete</P><P>INFO: Read is 34% complete</P><P>INFO: Read is 35% complete</P><P>INFO: Read is 36% complete</P><P>INFO: Read is 37% complete</P><P>INFO: Read is 38% complete</P><P>INFO: Read is 39% complete</P><P>INFO: Read is 40% complete</P><P>INFO: Read is 41% complete</P><P>INFO: Read is 42% complete</P><P>INFO: Read is 43% complete</P><P>INFO: Read is 44% complete</P><P>INFO: Read is 45% complete</P><P>INFO: Read is 46% complete</P><P>INFO: Read is 47% complete</P><P>INFO: Read is 48% complete</P><P>INFO: Read is 49% complete</P><P>INFO: Read is 50% complete</P><P>INFO: Read is 51% complete</P><P>INFO: Read is 52% complete</P><P>INFO: Read is 53% complete</P><P>INFO: Read is 54% complete</P><P>INFO: Read is 55% complete</P><P>INFO: Read is 56% complete</P><P>INFO: Read is 57% complete</P><P>INFO: Read is 58% complete</P><P>INFO: Read is 59% complete</P><P>INFO: Read is 60% complete</P><P>INFO: Read is 61% complete</P><P>INFO: Read is 62% complete</P><P>INFO: Read is 63% complete</P><P>INFO: Read is 64% complete</P><P>INFO: Read is 65% complete</P><P>INFO: Read is 66% complete</P><P>INFO: Read is 67% complete</P><P>INFO: Read is 68% complete</P><P>INFO: Read is 69% complete</P><P>INFO: Read is 70% complete</P><P>INFO: Read is 71% complete</P><P>INFO: Read is 72% complete</P><P>INFO: Read is 73% complete</P><P>INFO: Read is 74% complete</P><P>INFO: Read is 75% complete</P><P>INFO: Read is 76% complete</P><P>INFO: Read is 77% complete</P><P>INFO: Read is 78% complete</P><P>INFO: Read is 79% complete</P><P>INFO: Read is 80% complete</P><P>INFO: Read is 81% complete</P><P>INFO: Read is 82% complete</P><P>INFO: Read is 83% complete</P><P>INFO: Read is 84% complete</P><P>INFO: Read is 85% complete</P><P>INFO: Read is 86% complete</P><P>INFO: Read is 87% complete</P><P>INFO: Read is 88% complete</P><P>INFO: Read is 89% complete</P><P>INFO: Read is 90% complete</P><P>INFO: Read is 91% complete</P><P>INFO: Read is 92% complete</P><P>INFO: Read is 93% complete</P><P>INFO: Read is 94% complete</P><P>INFO: Read is 95% complete</P><P>INFO: Read is 96% complete</P><P>INFO: Read is 97% complete</P><P>INFO: Read is 98% complete</P><P>INFO: Read is 99% complete</P><P>INFO: Read is 100% complete</P><P>INFO: Copy of NK completed successfully</P><P>Either card is not eSD2.1, or boot partition is not created yet</P><P>Download successful!&nbsp; Jumping to image at 0x0 (physical 0x70200000)...</P><P></P><P></P><P></P><P></P><P></P><P></P><P>INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x8b</P><P>BSP Clock Configuration:</P><P>&nbsp;&nbsp;&nbsp; OSC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; PLL1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 1000000000 Hz</P><P>&nbsp;&nbsp;&nbsp; PLL2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 400000000 Hz</P><P>&nbsp;&nbsp;&nbsp; PLL3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 400000000 Hz</P><P>&nbsp;&nbsp;&nbsp; PLL4&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 595000000 Hz</P><P>&nbsp;&nbsp;&nbsp; LP_APM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ARM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 1000000000 Hz</P><P>&nbsp;&nbsp;&nbsp; AXI_A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 400000000 Hz</P><P>&nbsp;&nbsp;&nbsp; AXI_B&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; EMI_SLOW&nbsp;&nbsp;&nbsp; =&nbsp; 133333333 Hz</P><P>&nbsp;&nbsp;&nbsp; AHB&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 133333333 Hz</P><P>&nbsp;&nbsp;&nbsp; IPG&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 66666666 Hz</P><P>&nbsp;&nbsp;&nbsp; PERCLK&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 8000000 Hz</P><P>&nbsp;&nbsp;&nbsp; CKIL_SYNC&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 32768 Hz</P><P>&nbsp;&nbsp;&nbsp; DDR&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 400000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ARM_AXI&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; IPU_HSP&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; VPU_AXI&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; GPU&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; GPU2D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; DEBUG_APB&nbsp;&nbsp; =&nbsp; 200000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ENFC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 33333333 Hz</P><P>&nbsp;&nbsp;&nbsp; USBOH3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 66666666 Hz</P><P>&nbsp;&nbsp;&nbsp; ESDHC1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 100000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ESDHC2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 100000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ESDHC3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 100000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ESDHC4&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 100000000 Hz</P><P>&nbsp;&nbsp;&nbsp; UART&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 6000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 6000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 6000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI_EXT1&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI_EXT2&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 19047619 Hz</P><P>&nbsp;&nbsp;&nbsp; USB_PHY&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; TVE_216_54&nbsp; =&nbsp; 297500000 Hz</P><P>&nbsp;&nbsp;&nbsp; DI0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 50000000 Hz</P><P>&nbsp;&nbsp;&nbsp; DI1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 297500000 Hz</P><P>&nbsp;&nbsp;&nbsp; VPU_RCLK&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SSI_LP_APM&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SPDIF_XTAL&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; LDB_DIO&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 595000000 Hz</P><P>&nbsp;&nbsp;&nbsp; LDB_DI1&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp; 595000000 Hz</P><P>&nbsp;&nbsp;&nbsp; SPDIF0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 1142857 Hz</P><P>&nbsp;&nbsp;&nbsp; ESAI&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 3000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ESAI_HCKR&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 Hz</P><P>&nbsp;&nbsp;&nbsp; ESAI_HCKT&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 Hz</P><P>&nbsp;&nbsp;&nbsp; CAN&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 66666666 Hz</P><P>&nbsp;&nbsp;&nbsp; FIRI&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 24000000 Hz</P><P>&nbsp;&nbsp;&nbsp; CSI_MCLK1&nbsp;&nbsp; =&nbsp;&nbsp; 25000000 Hz</P><P>&nbsp;&nbsp;&nbsp; CSI_MCLK2&nbsp;&nbsp; =&nbsp;&nbsp; 25000000 Hz</P><P>&nbsp;&nbsp;&nbsp; ECSPI&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 66666666 Hz</P><P>&nbsp;&nbsp;&nbsp; LPSR&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 Hz</P><P>&nbsp;&nbsp;&nbsp; PGC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp; 8333333 Hz</P><P>&nbsp;&nbsp;&nbsp; ASRC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 59500000 Hz</P><P>&nbsp;&nbsp;&nbsp; IEEE_CEMX&nbsp;&nbsp; =&nbsp;&nbsp; 40000000 Hz</P><P>&nbsp;&nbsp;&nbsp; CKIH&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp; 22579200 Hz</P><P>&nbsp;&nbsp;&nbsp; CKIH2&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 Hz</P><P>Windows CE Kernel for ARM (Thumb Enabled)</P><P>OEMInit:&nbsp; silicon ?= 0x21</P><P>BoardID = 0xc03.</P><P>Setting 1.2v regulator PLL1P2 to 1.3v</P><P>PID:00400002 TID:00510002 OALIoCtlHalInitRTC(2006/1/1 12:0:0.000)</P><P>PID:00400002 TID:00510002 WARNING: SRTC was reset.</P><P>PID:00400002 TID:011A006E UsbHost : New Function [address(1) / layer(0)]</P><P>PID:00400002 TID:00A20026 OTG : Load HCD</P><P>PID:00400002 TID:00A20026 OTG : Unload HCD</P><P>PID:00400002 TID:00A20026 OTG : Load UFN</P><P>PID:00400002 TID:00A20026 UfnClientLib!UfnCheckPID: WARNING -- using MS reference platform VID/PID 0x045e/0x00ce (not allowed in shipping platforms)</P><P>PID:00400002 TID:03640026 WARNING: possible performance issue: timeInit() not called, calling it in timeSetEvent()PID:00400002 TID:03640026 Pin muxing for Display pins complete.</P><P>PID:00400002 TID:03640026 KeybdDriverInitializeEx: Layout Manager successfully initialized to&nbsp; 1</P><P>PID:00400002 TID:03640026 LayoutMgrActivateKeyboardLayout: Called with hkl = 0x00000409</P><P>PID:01D70026 TID:05C00006 MSIM: IM_ReadRegistry read KB 5</P><P>PID:05C20006 TID:04980036 Explorer(V2.0) taskbar thread started.</P><P>PID:00400002 TID:03A20006 NDISPWR:: Found adapter [FEC1]</P></BODY></HTML> Wed, 24 Jul 2013 06:56:34 GMT https://community.nxp.com/t5/i-MX-Processors/Nothing-visible-on-VGA-after-booting-WEC7-image-on-QSB-START-R/m-p/289147#M34643 martincoster 2013-07-24T06:56:34Z