topic Re: Accelerometer Device Orientation Detection in vertical direction in i.MX Processors

Accelerometer Device Orientation Detection in vertical direction

NeemaBhandary — Fri, 08 Mar 2013 11:01:52 GMT

Hi all,

I'm using application "AccSample" from following path for testing Accelerometer driver.

%_WINCEROOT%\platform\IMX313DS\SRC\TEST\ACCELEROMETER

        1. Before enabling the rotation: If the device is rotated both in horizontal and vertical direction then x,y & z co-ordinate values are getting updated.

         2. After rotation is enabled: If the platform is rotated in horizontal direction(flat) then orientation change is getting detected and also the screen rotation                                                       is happening according to the device orientation. But Orientation change is not getting detected in the vertical direction i.e if                                                       the platform is kept vertical and rotated then screen rotation is not happening.

Please let me know the reason for this issue

Thank You

Neema

Re: Accelerometer Device Orientation Detection in vertical direction

karina_valencia — Fri, 15 Mar 2013 15:39:40 GMT

Deactivated user can you help on this case?

Re: Accelerometer Device Orientation Detection in vertical direction

karina_valencia — Mon, 03 Jun 2013 21:04:57 GMT

NeemaBhandary

NeemaBhandary can you let me know the board do you have? Part number?

Re: Accelerometer Device Orientation Detection in vertical direction

karina_valencia — Mon, 10 Jun 2013 17:59:16 GMT

No update from customer