topic fsl-alsa-plugins-1.0.25 build failed in i.MX Processors

fsl-alsa-plugins-1.0.25 build failed

keitanagashima — Wed, 28 Aug 2013 12:54:50 GMT

Hi,

I am trying to build the fsl-alsa-plugins-1.0.25.tar.gz of gstreamer plugins.

But, Build Failed...

Please refer to attached log.

Could you give me a advice?

[Environment]

Board: MX6DL SABRE-SDP

BSP: L3.0.35_4.0.0

Keita

Original Attachment has been moved to: LogFile_fsl-alsa-plugins-1.0.25.txt.zip

Re: fsl-alsa-plugins-1.0.25 build failed

Rita_Wang — Fri, 30 Aug 2013 02:31:11 GMT

Hi Keita :

I have set up the same environment as yours , and while i tried to build the fsl-alsa-plugins-1.0.25.tar.gz of gstreamer plugins it was build succeed . I read the words of the attached log one by one , and i have tried many ways to find the mistakes and reproduce the errors , it made no use. Errors come from the "asrc_pair.c", so maybe your source code is broken. I advise you to download the Multimedia Codec package from here:http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX6_SW and try to build it again. You can reference to the document "i.MX_6_Ubuntu_Multimedia_User_Guide.pdf".

Best Regards

DAN

Re: fsl-alsa-plugins-1.0.25 build failed

Rita_Wang — Fri, 30 Aug 2013 02:39:31 GMT

Hi Keita :

Please go to edit the ltib/dist/lfs-5.1/gst-plugins-good/gst-plugins-good.spec when you are building .

Use '#' to comment out the followings cairo things like this :

#export CAIRO_CFLAGS=-I/home/ashish/Desktop/dev_imx6/ltib/rootfs/usr/include/cairo

#export CAIRO_LIBS=-L/home/ashish/Desktop/dev_imx6/ltib/rootfs/usr/lib/cairo

#export LIBS=-lcairo

Otherwise the gst-fsl-plugins will be build failed.

Best Regards

DAN

Re: fsl-alsa-plugins-1.0.25 build failed

keitanagashima — Fri, 30 Aug 2013 10:17:45 GMT

Hi DAN,

Thank you for your reply.

I have already used '#' to comment out in gst-plugins-good.spec file.

So, gst-plugins-good build succeeded.

I tried to install and build the MMCODEC again.

But, Build Failed...

When I checked out below 2 packages, Linux BSP build succeeded.

[ ] gst-plugins-gl

[ ] fsl-alsa-plugins

Refer to "Figure 2 Selecting the Plugins" in i.MX Linux Multimedia Framework User's Guide, Rev 3.0.6.

This figure checked out 2 packages, too.

Can you build the fsl-alsa-plugins with checking " [*] fsl-alsa-plugins"?

Keita

Re: fsl-alsa-plugins-1.0.25 build failed

Rita_Wang — Mon, 02 Sep 2013 05:21:02 GMT

Hi Keita,

As you select " [*] fsl-alsa-plugins", the fsl-alsa-plugins will be build by LTIB. And it is build succeed when i select. Refer to "Figure 2-2 Selecting Plug-Ins" in i.MX Linux Multimedia Framework User's Guide, libfslcodec, libfslparser, libfslvpuwrap, gst-fsl-plugins, gsst-plugins-gl, and fsl-alsa-plugins should all be selected.

Best Regards

DAN

Re: fsl-alsa-plugins-1.0.25 build failed

keitanagashima — Tue, 03 Sep 2013 05:12:05 GMT

Hi DAN,

I think so too.

But, "fsl-alsa-plugins" didn't build in my environment.

My building procedure is below link.

https://community.freescale.com/thread/310185

Ummm...

Keita

Re: fsl-alsa-plugins-1.0.25 build failed

Rita_Wang — Tue, 03 Sep 2013 06:39:07 GMT

Hi Keita,

You said that "fsl-alsa-plugins" didn't build in your environment. Could you attach the error? I want to know the details.

Best Regards

Dan

Re: fsl-alsa-plugins-1.0.25 build failed

LeonardoSandova — Tue, 03 Sep 2013 15:17:13 GMT

Hi Keita,

I just tried building the package and worked..... strange. Make sure your platform type is imx6q (./ltib -m selectype). Also, remove the rpm/BUILD/fsl-alsa-plugins-1.0.25/ folder and prep & scbuild & scdeploy manually.

Leo

Re: fsl-alsa-plugins-1.0.25 build failed

keitanagashima — Wed, 04 Sep 2013 04:08:49 GMT

Hi DAN,

> Could you attach the error?

> I want to know the details.

Yes. The error occurred.

Refer to above my first question.

I attached the error log file.

Keita

Re: fsl-alsa-plugins-1.0.25 build failed

keitanagashima — Wed, 04 Sep 2013 04:55:29 GMT

Hi Leo,

>Make sure your platform type is imx6q (./ltib -m selectype).

My setting is following.

--- Choose the platform type

Selection (imx6q) --->

--- Choose the packages profile

Selection (use packages in preconfig (Min profile))

>Also, remove the rpm/BUILD/fsl-alsa-plugins-1.0.25/ folder and prep & scbuild & scdeploy manually.

I removed rpm/BUILD/fsl-alsa-plugins-1.0.25/ folder & prep & scbuild.

./ltib -m prep -p fsl-alsa-plugins // OK.

./ltib -m scbuild -p fsl-alsa-plugins // Build failed.

(Error log was same the attached "LogFile_fsl-alsa-plugins-1.0.25.txt")

Keita

Re: fsl-alsa-plugins-1.0.25 build failed

Rita_Wang — Thu, 05 Sep 2013 09:08:44 GMT

Hi Keita,

I advise you to download IMX53_QSB_UBUNTU_VM from http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX53QSB&fpsp=1&tab=Design_Tools_Tab and use it to build from beginning.

When you are building, make sure to edit the gst-plugins-good.spec as I have told you and install libtool by commends"sudo apt-get install libtool and sudo apt-get update".

I have try it step by step, it's OK. I think this method can help you .

Best Regards

Dan

Re: fsl-alsa-plugins-1.0.25 build failed

keitanagashima — Mon, 09 Sep 2013 06:53:25 GMT

Hi Dan,

Thank you for your reply.

> I advise you to download IMX53_QSB_UBUNTU_VM

I have used the Virtual Box instead of VMware.

So, I couldn' use this VM image.

> make sure to edit the gst-plugins-good.spec as I have told you

Yes. I already confirmed and comment out the "gst-plugins-good.spec" file as you said.

> and install libtool by commends"sudo apt-get install libtool and sudo apt-get update".

Tried to above command.

But, it wasn't improve.

Keita

Re: fsl-alsa-plugins-1.0.25 build failed

Rita_Wang — Mon, 09 Sep 2013 10:39:18 GMT

Hi Keita,

I want to know that does the new error occur or the error is the same as you have attached ?

Thanks.

Best Regards

Dan

Re: fsl-alsa-plugins-1.0.25 build failed

Rita_Wang — Fri, 13 Sep 2013 03:00:08 GMT

Hi Keita,

Have you solved the problem?

Best Regards

Dan

Re: Re: fsl-alsa-plugins-1.0.25 build failed

keitanagashima — Wed, 25 Sep 2013 01:02:53 GMT

Hi Dan,

Sorry for my delay.

I changed my BSP environment from L3.0.35_4.0.0 to L3.0.35_4.1.0.

fsl-alsa-plugins-1.0.25 build succeeded

Thank you very much.

Keita

Re: fsl-alsa-plugins-1.0.25 build failed

Rita_Wang — Wed, 25 Sep 2013 02:18:41 GMT

Hi Keita,

It's a good news. I wonder if you have solved the problem, and it also confused me. Thank you for your reply.

Best Regards

Dan

Re: fsl-alsa-plugins-1.0.25 build failed

keitanagashima — Fri, 04 Oct 2013 07:59:56 GMT

Hi Dan,

>I wonder if you have solved the problem, and it also confused me.

I think so, too.

There was change the document of "Setting_Up_LTIB_Host.pdf" in L3.0.35_4.1.0 from L3.0.35_4.0.0.

=====

# Install packages needed by LTIB

sudo aptitude -y install gettext libgtk2.0-dev rpm bison m4 libfreetype6-dev

sudo aptitude -y install libdbus-glib-1-dev liborbit2-dev intltool

sudo aptitude -y install ccache ncurses-dev zlib1g zlib1g-dev gcc g++ libtool

sudo aptitude -y install uuid-dev liblzo2-dev

sudo aptitude -y install tcl dpkg

sudo aptitude -y install asciidoc texlive-latex-base dblatex xutils-dev // <---Add this install

=====

I found only following difference in build procedure.

Case "L3.0.35_4.1.0" ;

$ sudo aptitude -y install asciidoc texlive-latex-base dblatex xutils-dev

Case "L3.0.35_4.0.0" ;

$ sudo apt-get install texinfo

$ sudo apt-get install texlive

Keita

Re: fsl-alsa-plugins-1.0.25 build failed

Rita_Wang — Tue, 08 Oct 2013 02:56:57 GMT

Hi Keita,

Thanks a lot for your details.

Best Regards

Dan