i.MX ProcessorsのトピックRe: how to implement the boot splash in u-boot

how to implement the boot splash in u-boot

DannyXiao — Thu, 18 Jul 2013 10:00:39 GMT

Dear all:

I followed the chapter 10 in the document "13.5.0_Android_Advanced_User_Guide.pdf" and try to bring up the boot splash logo at uboot stage on MX6SL EVK board.

But after I did all the things follow the steps in the document, I haven't seen anything on the EPD panel. Has anyone tried this?

Re: how to implement the boot splash in u-boot

DannyXiao — Mon, 22 Jul 2013 08:49:07 GMT

Can anyone help on my question?

Re: how to implement the boot splash in u-boot

OtavioSalvador — Mon, 22 Jul 2013 12:09:03 GMT

The 2013.07 U-Boot - going to be released very soon - has support for it.

Re: how to implement the boot splash in u-boot

DannyXiao — Tue, 23 Jul 2013 03:02:11 GMT

Thank you for your reply Otavio. Is this 2013.07 u-boot the offical FSL release?

Re: how to implement the boot splash in u-boot

OtavioSalvador — Tue, 23 Jul 2013 13:04:18 GMT

It is not. But it works wonderfully.

Re: how to implement the boot splash in u-boot

DannyXiao — Wed, 24 Jul 2013 01:56:33 GMT

Could you show me where to get this u-boot?

Re: how to implement the boot splash in u-boot

OtavioSalvador — Wed, 24 Jul 2013 02:46:06 GMT

You can get it using GIT from:

git.denx.de Git - u-boot.git/summary

We also have it supported in the Yocto based BSP.

Yocto has a good community around it and currently most commonly used SoCs from i.MX platform is already supported by the meta-fsl-arm layer.

You can find more information how to make a build at https://community.freescale.com/docs/DOC-94023

i.MX Yocto Project: Frequently Asked Questions