topic Re: using TV decoder(tvp5158) on IMX6 in i.MX Processors

using TV decoder(tvp5158) on IMX6

hyunhoshin — Tue, 16 Apr 2013 09:13:15 GMT

I'm using tv decoder(tvp5158) on IMX6 and output of tv decoder is BT656(NTSC input,720*480@30fps)

when capture frame using v4l2 application

picture is same as attached files
(frame1~5.jpg)

has anyone idea about this situations?

I'm using Linux 3.0.15 and setting value of csi_param as below

data_width: 1
clk_mode : 2
ext_vsync : 0
Vsync_pol : 0
Hsync_pol : 0
pixclk_pol : 1
data_pol : 0
sens_clksrc : 0
pack_tight : 0
force_eof : 0
data_en_pol : 0
data_fmt : UYVY
csi : 0
mclk : 0

please help me...

Re: using TV decoder(tvp5158) on IMX6

weidong_sun — Fri, 19 Apr 2013 06:27:45 GMT

Hello,hyunho,

It seems that image on screen is scrolling up and down , Right ?

Regards,

Weidong

Re: using TV decoder(tvp5158) on IMX6

hyunhoshin — Fri, 19 Apr 2013 06:40:24 GMT

you're right, screen is rolling to upside. maybe about 2 pixels every frame

Re: using TV decoder(tvp5158) on IMX6

weidong_sun — Fri, 19 Apr 2013 07:22:19 GMT

Hello,hyunho,

I judge the issue looks like different CVBS standard. For example:

(1)NTSC

if CVBS camera is NTSC , TVP5158 should be set NTSC standard.

(2)PAL

if CVBS camera is PAL, TVP5158 should be set PAL standard.

So, I feel standard setting in TVP5158 is differenct from it's CVBS signal(camera) input.

check it and try !

Regards,

Weidong

Re: using TV decoder(tvp5158) on IMX6

hyunhoshin — Mon, 22 Apr 2013 01:22:03 GMT

TVP5158 setting was fine

CSI input size was 720 x 525 in base source(IMX6 original code)

I changed that 720 x 525 to 720 x 488 and EAV/SAV code exchange. so, it work fine(no image rolling)

thanks to your opinion.

Re: using TV decoder(tvp5158) on IMX6

zhangjay — Thu, 24 Oct 2013 03:17:09 GMT

I am using tvp5158 on mx53 board, can you share your tvp5158 driver source?

Thanks!

Re: using TV decoder(tvp5158) on IMX6

zhangjay — Tue, 29 Oct 2013 01:46:58 GMT

Can you help me with this issue?

https://community.freescale.com/message/358505#358505

Re: using TV decoder(tvp5158) on IMX6

翔李 — Fri, 12 Aug 2016 13:45:06 GMT

I am using tvp5158 on Imx6q board, Linux,can you share your tvp5158 driver source?

My email:xiang.li@ivicar.cn

Re: using TV decoder(tvp5158) on IMX6

翔李 — Fri, 12 Aug 2016 13:47:03 GMT

I am using tvp5158 on Imx6q board, Linux,can you share your tvp5158 driver source?

My email:xiang.li@ivicar.cn

thanks.

Re: using TV decoder(tvp5158) on IMX6

翔李 — Mon, 15 Aug 2016 01:51:08 GMT

I am using tvp5158 on Imx6q board, Linux,can you share your tvp5158 driver source?

My email:xiang.li@ivicar.cn

thanks.