i.MX Processors中的主题 Re: I.mx6 in PoP package, availability? https://community.nxp.com/t5/i-MX-Processors/I-mx6-in-PoP-package-availability/m-p/263562#M26983 <HTML><HEAD></HEAD><BODY><P>Please contact one of our prefer distributors or any of Freescale Sales Representatives they can help you regarding the PoP Package.</P></BODY></HTML> Wed, 29 Jan 2014 18:47:25 GMT jamesbone 2014-01-29T18:47:25Z I.mx6 in PoP package, availability? https://community.nxp.com/t5/i-MX-Processors/I-mx6-in-PoP-package-availability/m-p/263561#M26982 <HTML><HEAD></HEAD><BODY><P>I'm rather stuck for PCB area on a project comming my way shortly, the common 21x21mm bga may just squeeze on as the board is likely to be ~30mm wide, but it's going to be very tight and will up my layer count.</P><P></P><P>Does anyone know where we could get low volumes of the I.mx6 dual or quad in the 12x12mm PoP package, say 10-off for prototypes then 100's for small producton runs?</P><P></P><P>By the look of it the PoP restricts us to lpddr, is this a big penalty given the decent caches in there, I'm h264 compressing 1080p24 or p30.</P><P></P><P>Thanks in avdance,</P><P>R.</P></BODY></HTML> Wed, 29 Jan 2014 01:12:09 GMT https://community.nxp.com/t5/i-MX-Processors/I-mx6-in-PoP-package-availability/m-p/263561#M26982 richardjjones 2014-01-29T01:12:09Z Re: I.mx6 in PoP package, availability? https://community.nxp.com/t5/i-MX-Processors/I-mx6-in-PoP-package-availability/m-p/263562#M26983 <HTML><HEAD></HEAD><BODY><P>Please contact one of our prefer distributors or any of Freescale Sales Representatives they can help you regarding the PoP Package.</P></BODY></HTML> Wed, 29 Jan 2014 18:47:25 GMT https://community.nxp.com/t5/i-MX-Processors/I-mx6-in-PoP-package-availability/m-p/263562#M26983 jamesbone 2014-01-29T18:47:25Z