topic Re: iMX8MP and Deserializers in i.MX Processors

iMX8MP and Deserializers

sfatyushkin — Fri, 09 Oct 2026 07:29:25 GMT

Hi all!

We are using the i.MX 8M Plus in our Digital Video Registrator. We are currently tasked with modifying the design to connect at least two (4 better) cameras using SerDes chips. In researching this, I see that connecting the DS90UB960 or DS90UB954 might be problematic because the processor does not support virtual channels.
Is there any information or positive experience regarding the connection of other deserializers (from TI, Analog Devices, THine Electronics, etc.)?

Best regards,
Serge

Re: iMX8MP and Deserializers

JosephAtNXP — Fri, 09 Oct 2026 16:45:55 GMT

Hi,

Thank you for your interest in NXP Semiconductor products,

As you mention, serializers are not available for i.MX 8M Plus due to the lack of virtual channel, there is a reference for i.MX 8 series processors using i.MX8QM and i.MX8QXP, i.MX 95 supports VC and has a serializer reference as well.

Regards

Re: iMX8MP and Deserializers

sfatyushkin — Mon, 12 Oct 2026 04:18:02 GMT

I understand that two cameras cannot be connected to a single MIPI interface using a deserializer.
However, are there any proven deserializer solutions for connecting a single/two camera to a single/two CSI/MIPI interfaces?
Is it possible to use, for example, the MAX96714 ?

Re: iMX8MP and Deserializers

JosephAtNXP — Tue, 13 Oct 2026 20:48:07 GMT

Hi,

No, there has not been any solutions proven like the one described,

Regards,

Re: iMX8MP and Deserializers

sfatyushkin — Wed, 14 Oct 2026 05:28:46 GMT

That’s very strange. I personally saw and held in my hands a solution based on the THCV242A + iMXMP —though I don't recall whether it connected one camera or two...