i.MX8MP EVK HABv4: hab_status shows HAB_FAILURE before fuses are burned — expected?

S-Harumoto — Thu, 02 Apr 2026 06:31:00 GMT

Hello

I want to do secure boot(HABv4) on i.MX8MP EVK using Yocto Project.

I referred to the following link.

https://github.com/nxp-imx/uboot-imx/blob/lf_v2025.04/doc/imx/habv4/guides/mx8m_secure_boot.txt

I have not burned the fuse table yet.

After boot the u-boot and run the `hab_status` command, the following events will be displayed.

u-boot=> hab_status

Secure boot disabled

HAB Configuration: 0xf0, HAB State: 0x66

--------- HAB Event 1 -----------------
event data:
        0xdb 0x00 0x14 0x45 0x33 0x0c 0xa0 0x00
        0x00 0x00 0x00 0x00 0x40 0x1f 0xbd 0xc0
        0x00 0x00 0x00 0x20STS = HAB_FAILURE (0x33)RSN = HAB_INV_ASSERTION (0x0C)CTX = HAB_CTX_ASSERT (0xA0)ENG = HAB_ENG_ANY (0x00)


--------- HAB Event 2 -----------------
event data:
        0xdb 0x00 0x14 0x45 0x33 0x0c 0xa0 0x00
        0x00 0x00 0x00 0x00 0x40 0x1f 0xad 0xc0
        0x00 0x00 0x00 0x04STS = HAB_FAILURE (0x33)RSN = HAB_INV_ASSERTION (0x0C)CTX = HAB_CTX_ASSERT (0xA0)ENG = HAB_ENG_ANY (0x00)


--------- HAB Event 3 -----------------
event data:
        0xdb 0x00 0x3c 0x45 0x33 0x18 0xc0 0x00
        0xca 0x00 0x34 0x00 0x02 0xc5 0x1d 0x00
        0x00 0x00 0x0b 0x48 0x40 0x1f 0xad 0xc0
        0x00 0x00 0x10 0x20 0x40 0x20 0x00 0x00
        0x00 0x11 0x43 0x90 0x40 0x31 0x43 0x90
        0x00 0x00 0xea 0x98 0x00 0x97 0x00 0x00
        0x00 0x00 0xbb 0x80 0x56 0x00 0x00 0x00
        0x00 0x08 0xc3 0x80STS = HAB_FAILURE (0x33)RSN = HAB_INV_SIGNATURE (0x18)CTX = HAB_CTX_COMMAND (0xC0)ENG = HAB_ENG_ANY (0x00)


--------- HAB Event 4 -----------------
event data:
        0xdb 0x00 0x3c 0x45 0x33 0x18 0xc0 0x00
        0xca 0x00 0x34 0x00 0x02 0xc5 0x1d 0x00
        0x00 0x00 0x0b 0x48 0x40 0x1f 0xad 0xc0
        0x00 0x00 0x10 0x20 0x40 0x20 0x00 0x00
        0x00 0x11 0x43 0x90 0x40 0x31 0x43 0x90
        0x00 0x00 0xea 0x98 0x00 0x97 0x00 0x00
        0x00 0x00 0xbb 0x80 0x56 0x00 0x00 0x00
        0x00 0x08 0xc3 0x80STS = HAB_FAILURE (0x33)RSN = HAB_INV_SIGNATURE (0x18)CTX = HAB_CTX_COMMAND (0xC0)ENG = HAB_ENG_ANY (0x00)

Questions:

1) Is it expected/normal to see these HAB events (HAB_INV_ASSERTION / HAB_INV_SIGNATURE) when fuses are not programmed yet?

2) After programming the SRK hash, should these events disappear?

Or do these events indicate that something is already wrong in my signed images/CSF/FIT setup?

thank you

Re: i.MX8MP EVK HABv4: hab_status shows HAB_FAILURE before fuses are burned — expected?

joanxie — Thu, 02 Apr 2026 08:21:52 GMT

this shouldn't be the expected behavior, you need double check your steps, it seems there is problem with your csf bin file

Re: i.MX8MP EVK HABv4: hab_status shows HAB_FAILURE before fuses are burned — expected?

S-Harumoto — Fri, 03 Apr 2026 05:29:56 GMT

Thank you for your reply.
I double checked my steps.
I was using wrong blocks in csf_fit.txt.

The root cause was that the DTB size was not aligned.

I needed to pad the DTB before running print_fit_hab.sh.

build/tmp/work/imx8mp_lpddr4_evk-poky-linux/imx-boot/1.0-r0/git/iMX8M# ../scripts/pad_image.sh imx8mp-evk.dtb 
Padding imx8mp-evk.dtb to 60064 bytes 
build/tmp/work/imx8mp_lpddr4_evk-poky-linux/imx-boot/1.0-r0/git/iMX8M# TEE_LOAD_ADDR=0x56000000 ATF_LOAD_ADDR=0x00970000 FIT_DATA_POS=0x5000 ./print_fit_hab.sh 0x60000 imx8mp-evk.dtb 
0x40200000 0x5D000 0x114390 
0x40314390 0x171390 0xEAA0 
0x970000 0x17FE30 0xBB80 
0x56000000 0x18B9B0 0x8C380

Now I can see "No HAB Events Found!"
thank you

topic Re: i.MX8MP EVK HABv4: hab_status shows HAB_FAILURE before fuses are burned — expected? in i.MX Processors

i.MX8MP EVK HABv4: hab_status shows HAB_FAILURE before fuses are burned — expected?

Re: i.MX8MP EVK HABv4: hab_status shows HAB_FAILURE before fuses are burned — expected?

Re: i.MX8MP EVK HABv4: hab_status shows HAB_FAILURE before fuses are burned — expected?