topic Re: How does the imx95 support the camera (ov13855)? in i.MX Processors

How does the imx95 support the camera (ov13855)?

yrj — Wed, 24 Sep 2025 12:02:22 GMT

HI NXP

1. The file ov13855.c was not found under drivers/media/i2c/, how should I support it?

Bio_TICFSL — Wed, 24 Sep 2025 14:08:29 GMT

Hello,

There is no support for ov138555, but you can see other cameras from omnivision and ported it.

Regards

yrj — Thu, 25 Sep 2025 01:02:45 GMT

HI Bio_TICFSL
Okay, where can I check the compatibility list for the imx95 camera?
Regards

Bio_TICFSL — Thu, 25 Sep 2025 12:38:43 GMT

Hi,

Since the i.MX95 is not official release yet, there is no official cameras supported, but this camera should be supported by ISP.

Regards

yrj — Fri, 26 Sep 2025 01:17:30 GMT

HI Bio_TICFSL
Excuse me, how to use the ISP? Is there a manual?

Bio_TICFSL — Fri, 26 Sep 2025 15:33:21 GMT

liucx — Sat, 09 May 2026 08:58:22 GMT

fixed the issue？

can you share the function for enable ov13855?
now，run info below：

- entity 115: csidev-4ad30000.csi (2 pads, 2 links, 0 routes)

type V4L2 subdev subtype Unknown flags 0

device node name /dev/v4l-subdev10

pad0: Sink

[stream:0 fmt:UYVY8_1X16/1920x1080 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range]

<- "ov13855":0 []

pad1: Source

[stream:0 fmt:UYVY8_1X16/1920x1080 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range]

-> "4ac10000.syscon:formatter@20":0 [ENABLED,IMMUTABLE]

- entity 120: ov13855 (1 pad, 1 link, 0 routes)

type V4L2 subdev subtype Sensor flags 0

device node name /dev/v4l-subdev11

pad0: Source

[stream:0 fmt:SBGGR10_1X10/2112x1568 field:none

crop.bounds:(0,0)/2112x1568

crop:(0,0)/2112x1568]

-> "csidev-4ad30000.csi":0 []

how to handler the issue？