topic Re: i used iMX6 CPU, could you tell me in i.MX Processors

i used iMX6 CPU, could you tell me

tintai — Sun, 07 Sep 2025 16:55:41 GMT

Dear,

i used iMX6 CPU, could you tell me:

1.why DISP0_CLK (PIN86) dcreased to below 2.8V? when Ambient temperature high.

2.why the CPU can not restart?

3.how to solve above 2 problems?

tin tai

Re: i used iMX6 CPU, could you tell me

JorgeCas — Sun, 07 Sep 2025 17:27:51 GMT

Hello,

I need more information about your testing setup.

Are you using a custom board?

Did you do a DDR stress test?

Which OS are you using?

How can I reproduce the issue in my side?

Best regards.

Re: i used iMX6 CPU, could you tell me

tintai — Tue, 09 Sep 2025 14:21:53 GMT

dear JorgeCas

i use MCIMX6D6AVT10AD.

sorry, i can not tell you testing setup.

Are you using a custom board? no

Did you do a DDR stress test? no

can you answer my questions by theory?

Re: i used iMX6 CPU, could you tell me

JorgeCas — Tue, 09 Sep 2025 18:10:36 GMT

Hello,

To ensure we can provide you with the most effective support, it would be very helpful if you could share the details of your setup. Without that information, it’s much more challenging to diagnose the issue accurately.

Since you are no using a custom board, if you are using our pre-built BSP you should can reset your board without any problem.

If you are using a custom image, please check the changes you did in the image.

Best regards.