i.MX ProcessorsのトピックRe: DRAM Training Failed on custom board

DRAM Training Failed on custom board

Axent — Fri, 13 Jun 2025 13:18:11 GMT

Hello. I rebased just to Compulab board:
https://www.compulab.com/products/carrier-boards/sb-ucmimx8plus-carrier-board/#specs
based on iMX8 Plus CPU.
I built lunch "evk_8mp-trunk_staging-userdebug" image.
And I have:

U-Boot SPL 2024.04 (Jun 13 2025 - 11:07:03 +0300)
DDRINFO: start DRAM init
DDRINFO: DRAM rate 4000MTS
Training FAILED

What is the next step? I read a lot about this problem. But still I am misunderstanding how to fix it using DDR Tool or something.
Please, help.
Thanks.

Re: DRAM Training Failed on custom board

Bio_TICFSL — Mon, 16 Jun 2025 14:43:14 GMT

Hello,

Maybe someone of @compulab can help.

Regards

Re: DRAM Training Failed on custom board

vraevsky — Tue, 17 Jun 2025 13:07:55 GMT

Dear Axent,

Please follow the procedure:
1) open up a support ticket at:
https://supportdb.compulab-systems.net/tickets

2) have a look at:
https://github.com/compulab-yokneam/imx8-android/blob/android-15.0.0_1.2.0/README.adoc

Regards,
Valentin