NXP Virtualisation guide for Variscite Spear MX8

rishabh_modi — Mon, 26 May 2025 10:40:49 GMT

Hello , I have a Variscite SPEAR MX8 based on NXP I.MX8 quad max. I wanted to run android and linux simultaneously via XEN hypervisor by following the nxp virtualization guide document IMXVIRTUG.

Once i run the command

sudo ./uuu_imx_android_flash.sh -f imx8qm -d xen

it tells me that the only supported platforms are :
sabresd_6dq, sabreauto_6q, sabresd_6sx, evk_7ulp, sabresd_7d
evk_8mm, evk_8mq, aiy_8mq, mek_8q, mek_8q_car

How can I run this script to support the Variscite SPEAR MX8?

Re: NXP Virtualisation guide for Variscite Spear MX8

Chavira — Mon, 26 May 2025 17:52:56 GMT

Thank you for contacting NXP Support!

I tried by my side in iMX8MP-EVK and is working without problems, Unfortunately we don´t provide the software for the board that you are using, please try contacting Variscite SUpport.

Best Regards!

Chavira

topic Re: NXP Virtualisation guide for Variscite Spear MX8 in i.MX Processors

NXP Virtualisation guide for Variscite Spear MX8

Re: NXP Virtualisation guide for Variscite Spear MX8