i.MX ProcessorsのトピックRe: STORE IMAGES IN PC THROUGH USB CABLE

STORE IMAGES IN PC THROUGH USB CABLE

shanmugamsundar — Sat, 06 Apr 2013 06:57:59 GMT

hi all,

I am using i.MX535 qsb in that i interfaced a camera application, i am using ov5640 camera sensor for recording, streaming and capturing the video and images, now i need to send the images and video through the USB cable to PC whether it is windows or Linux, can anyone help me, i am new to linux.

NOTE :

I want to use the board like a webcam does any one have idea about this

Thanks,

shan

Re: STORE IMAGES IN PC THROUGH USB CABLE

LeonardoSandova — Mon, 08 Apr 2013 17:17:46 GMT

I found this: https://github.com/RidgeRun/gst-plugin-usb

Try using the usb sink element and post your results please.

Leo

Re: STORE IMAGES IN PC THROUGH USB CABLE

shanmugamsundar — Wed, 10 Apr 2013 11:08:13 GMT

hi leo,

There is no configure file to compile the source, how can i get the file, is there any other way

Thanks,

shan,

Re: STORE IMAGES IN PC THROUGH USB CABLE

shanmugamsundar — Wed, 10 Apr 2013 12:34:47 GMT

hi leo,

I find the configure file and i tried to configure the source it shows the following the error, i am using the IMX_MMCODECS_11.09 mutimedia codecs, wheteher i need to upgrade the source? do you have any idea.

NOTE:

I am using the same source for the i.MX board.

ERROR:

checking for GST... no

configure: error:

You need to install or upgrade the GStreamer development

packages on your system. On debian-based systems these are

libgstreamer0.10-dev and libgstreamer-plugins-base0.10-dev.

on RPM-based systems gstreamer0.10-devel, libgstreamer0.10-devel

or similar. The minimum version required is 0.10.16.

Thanks,

shan

Re: STORE IMAGES IN PC THROUGH USB CABLE

LeonardoSandova — Wed, 10 Apr 2013 22:37:46 GMT

yes, installing this code is the hard part :smileysad:

Try using LTIB to compile this repo. Look at the .spec files located on ltib/dist/lfs-5.1/fsl-mm. before creating a new spec, run your commands under the ltib's shell (./ltib -m shell) and see if GST is found.