https://community.nxp.com/t5/i-MX-Processors/iMX8MPlus-EVK-KIT-Interfacing/m-p/2079073#M236231 <P>HI <a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/246957">@ReshmaRoy</a>!</P> <P>Thank you for contacting NXP Support!</P> <P>&nbsp;</P> <P>That cable looks compatible with our evk board, however I recommend to&nbsp; ask to your distributor the compatibility to be sure.</P> <P>&nbsp;</P> <P>Best Regards!</P> <P>Chavira</P> Fri, 11 Apr 2025 12:42:41 GMT Chavira 2025-04-11T12:42:41Z https://community.nxp.com/t5/i-MX-Processors/iMX8MPlus-EVK-KIT-Interfacing/m-p/2079008#M236226 <P>We are using the&nbsp;iMX8MPlus EVK KIT for validating the&nbsp; MIPI-DSI Display we are using for our design. We need to interface MINI SAS connector to our DISPLAY board to that in the EVK KIT. So, we checked the mating cable for the MINISAS in EVK KIT Part:&nbsp;075783-0132 and found that the cable part is obsolete. So we have taken an alternate cable part for the same. Can you please help me with confirming that this cable could be used with the &nbsp;iMX8MPlus EVK KIT's MINI SAS Connector.</P><P>Recommended Part:&nbsp;0795762102(obsolete)</P><P>Alternate Part selected:&nbsp;<SPAN>8F36-AAA105-0.50 by 3M</SPAN></P> Fri, 11 Apr 2025 10:36:45 GMT https://community.nxp.com/t5/i-MX-Processors/iMX8MPlus-EVK-KIT-Interfacing/m-p/2079008#M236226 ReshmaRoy 2025-04-11T10:36:45Z https://community.nxp.com/t5/i-MX-Processors/iMX8MPlus-EVK-KIT-Interfacing/m-p/2079073#M236231 <P>HI <a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/246957">@ReshmaRoy</a>!</P> <P>Thank you for contacting NXP Support!</P> <P>&nbsp;</P> <P>That cable looks compatible with our evk board, however I recommend to&nbsp; ask to your distributor the compatibility to be sure.</P> <P>&nbsp;</P> <P>Best Regards!</P> <P>Chavira</P> Fri, 11 Apr 2025 12:42:41 GMT https://community.nxp.com/t5/i-MX-Processors/iMX8MPlus-EVK-KIT-Interfacing/m-p/2079073#M236231 Chavira 2025-04-11T12:42:41Z