i.MX ProcessorsのトピックRe: Imx93 hot-button issue

Imx93 hot-button issue

xiang_1001 — Wed, 25 Dec 2024 07:36:43 GMT

The customer wants to transmit hotspots through lte module. After configuring hotspots, use the following command：

iptables -t nat -I POSTROUTING -o ppp0 -j MASQUERADE

The mobile phone is connected to the hotspot, indicating that the Internet cannot be accessed.

What else to configure?

weidong_sun — Thu, 02 Jan 2025 01:46:46 GMT

By default, i.MX93-EVK supports Murata M.2 WIFI Module based on NXP IW612 chip.

I have 2 question to confirm with you.

(1) WiFi module

Is it NXP IW612 M.2 module?

(2) NAT between WiFi AP and ethernet

You are using iptables to set NAT between WiFi AP and Ethernet? right?

(3) Linux BSP version

If you are using NXP WiFi , please tell me the linux bsp version you are using.

Thanks!

Regards,

weidong

xiang_1001 — Fri, 03 Jan 2025 03:09:19 GMT

This problem has been solved, thanks.