i.MX8M Plus access Quad SPI NOR Flash

JasonFSYang — Thu, 14 Nov 2024 01:27:15 GMT

Is there any documents or guides regarding how to read/write Quad SPI NOR flash?

I enabled kernel config

CONFIG_MTD_SPI_NOR=y

CONFIG_SPI_FSL_QUADSPI=y

in imx8mp-evk.dts

the node is created,

&flexspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi0>;
status = "okay";

flash0: mt25qu256aba@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};

however I can see any mtdblock device if I "cat /proc/mtd"
Do I miss something?

Re: i.MX8M Plus access Quad SPI NOR Flash

Zhiming_Liu — Thu, 14 Nov 2024 04:51:07 GMT

Hello,

Need to add nor flash name in dts, for example, add "mt25qu256a".

Then you can use mtdinfo to check device.

Best Regards,
Zhiming

i.MX Processors中的主题 i.MX8M Plus access Quad SPI NOR Flash

i.MX8M Plus access Quad SPI NOR Flash

Re: i.MX8M Plus access Quad SPI NOR Flash