topic Re: Xen Hypervisor not working with Android image - iMX8QuadMax in i.MX Processors

Xen Hypervisor not working with Android image - iMX8QuadMax

ranjith1 — Mon, 18 Dec 2023 13:35:26 GMT

Hi Team

We are using IMX8 Quad max board. We have downloaded "L_VIRT_4.14.98_2.0.0_4.11_0.10_ga_images_MX8QMMEK" image to the board and made SD card partitions as per document. We have downloaded the android OS image "android_p9.0.0_2.3.5-auto_image_8qmek" from NxP website and loaded to SD card.

From U boot if we run the command "xenmmcboot" getting errors.

lsio_gpio1 [200] not owned by curr partition

Error: lsio_gpio1 Power up failed! (error =4)

lsio_gpio1 [200] not owned by curr partition

Error: lsio_gpio1 Power up failed! (error =4)

Please let us know how to resolve these errors.

Also let us know is there any other OS/RTOS can be run on Xen hypervisor which is supported by iMX8QuadMax?

Best Regards

Ranjith Kumar

Re: Xen Hypervisor not working with Android image - iMX8QuadMax

Bio_TICFSL — Mon, 18 Dec 2023 15:27:38 GMT

Hello,

It looks like PMIC is not completely build in the image or it is failing, i bet may try again.

For mx8QM we have the jailhouse and XEN hypervisor. where you can boot linux, windows, android, Winriver OS.

regards

Re: Xen Hypervisor not working with Android image - iMX8QuadMax

ranjith1 — Tue, 19 Dec 2023 04:04:30 GMT

Thanks for the reply.

There was an issue with the switch3 which should be on while downloading.

Now we are able to boot Android OS without errors.

Best Regards

Ranjith Kumar

Re: Xen Hypervisor not working with Android image - iMX8QuadMax

ranjith1 — Fri, 22 Dec 2023 05:10:28 GMT

Hi Team

Will Promox hypervisor will be supported by iMX8QM.

Best Regards

Ranjith Kumar

Re: Xen Hypervisor not working with Android image - iMX8QuadMax

vivektol — Wed, 30 Oct 2024 11:39:00 GMT

Hello Rajith,

Can you provide me this file /etc/xen/domu-imx8qm-mek-androidauto.cfg for running Android as domu in imx8 board