i.MX ProcessorsのトピックRe: Settings APP cannot launch in L5.15 desktop

Settings APP cannot launch in L5.15 desktop

kenyroj — Thu, 17 Oct 2024 06:21:04 GMT

Hi All

I tried to build the imx-image-desktop via the manifest: imx-5.15.32-2.0.0_desktop.xml.
Now I tried to launch the Setting APP so I click the Setting icon. After clicking its icon, the mouse pointer shows as busy (spinning) for a few seconds, then the pointer returns to normal, but the app still does not launch.

I tried another way that enter the 'gnome-control-center' to launch the Setting app and I got following message on console.

gnome-control-center: symbol lookup error: /lib/x86_64-linux-gnu/libwebkit2gtk-4.0.so.37: undefined symbol: gbm_bo_create_with_modifiers2

Please help to check this issue. Thanks

Re: Settings APP cannot launch in L5.15 desktop

Zhiming_Liu — Fri, 18 Oct 2024 03:09:55 GMT

Hi @kenyroj

Can you also test imx-5.15.71-2.2.0_desktop.xml?

Best Regards
Zhiming

Re: Settings APP cannot launch in L5.15 desktop

kenyroj — Mon, 21 Oct 2024 12:06:22 GMT

Hi @Zhiming

Thanks for the reply. I did try the imx-5.15.71-2.2.0_desktop.xml with Ubuntu 22.04.1 LTS. This issue is still existed.

Is there any solution for this?

Thanks

Re: Settings APP cannot launch in L5.15 desktop

Zhiming_Liu — Tue, 22 Oct 2024 02:14:03 GMT

Hi @kenyroj

I am compiling same version and test it on my side,

Best Regards
Zhiming

Re: Settings APP cannot launch in L5.15 desktop

Zhiming_Liu — Wed, 23 Oct 2024 02:57:19 GMT

Hi @kenyroj

This issue is caused by Ubuntu upstream update. The Linux POC is out of update and there is no plan to continue maintain POC. For future ubuntu/debian support, customer should use flexbuild to deploy ubuntu or debain.

https://github.com/NXP/flexbuild

https://www.nxp.com/docs/en/user-guide/UG10155.pdf

Best Regards
Zhiming

Re: Settings APP cannot launch in L5.15 desktop

kenyroj — Tue, 29 Oct 2024 07:20:06 GMT

Hi @Zhiming

Could you supply any update about this?
Thanks

Re: Settings APP cannot launch in L5.15 desktop

Zhiming_Liu — Tue, 29 Oct 2024 07:26:25 GMT

Hi @kenyroj

This issue is caused by Ubuntu upstream update which you can refer this thread:

https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/2063476

The Linux POC is out of update and the NXP SW team don't plan to continue maintain POC. For future debian support, customer should use flexbuild to deploy debain.

https://github.com/NXP/flexbuild

https://www.nxp.com/docs/en/user-guide/UG10155.pdf

Best Regards
Zhiming