i.MX ProcessorsのトピックRe: i.mx8mmini - Yocto - Loaded 0 entries from dependency cache.

i.mx8mmini - Yocto - Loaded 0 entries from dependency cache.

imikec — Fri, 31 May 2024 20:55:48 GMT

Yocto - Nanbield branch

I am getting "Loaded 0 entries from dependency cache." all the time. The build works ok, but this is slowing the build. Is there a way to fix this?

Re: i.mx8mmini - Yocto - Loaded 0 entries from dependency cache.

Manuel_Salas — Fri, 31 May 2024 22:41:33 GMT

Hello @imikec

Is there some configuration in your local.conf file to try to reproduce by my side?

Best regards,

Salas.

Re: i.mx8mmini - Yocto - Loaded 0 entries from dependency cache.

imikec — Fri, 31 May 2024 22:48:29 GMT

Attached. Removed some of local definitions.

Re: i.mx8mmini - Yocto - Loaded 0 entries from dependency cache.

Manuel_Salas — Fri, 31 May 2024 23:49:23 GMT

Looking the file I guess the behavior is expected because there are a large number of features and packages to be installed.

Best regards,

Salas.

Re: i.mx8mmini - Yocto - Loaded 0 entries from dependency cache.

imikec — Fri, 31 May 2024 23:52:00 GMT

Not really, after the first build yocto should cache recipes, so it should not build them again.

Re: i.mx8mmini - Yocto - Loaded 0 entries from dependency cache.

imikec — Tue, 04 Jun 2024 17:05:04 GMT

I found that if I enable this:

require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE:virtclass-multilib-lib32 = "armv7athf-neon"
# Add the multilib packages to the image
IMAGE_INSTALL:append = " lib32-glibc lib32-libgcc lib32-libstdc++"

This is causing Yocto to reparse recipes every time, instead of the first one.